[Wed Sep 21 12:09:46 2011] Detection parameters:
  Position = (764.1, 658.5) = 9 58 41.81 1 53 18.2
  Extent = 1.2" x 0.7", rotation angle = 131 degrees
  Source counts = 165.6 +/- 13.1
  Background counts = 5.4
  Rate = 0.003 +/- 0.0003

[Wed Sep 21 12:09:47 2011] Off-axis axis estimate = 5.06'
[Wed Sep 21 12:11:48 2011] Using EEF radius (= 1.20 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 12:11:48 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 12:11:48 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Wed Sep 21 12:11:48 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.864
[Wed Sep 21 12:11:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.20"
[Wed Sep 21 12:11:48 2011] fullrun_ccd2_acisf08027_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 12:11:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08027_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 12:11:48 2011] fullrun_ccd2_acisf08027_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 12:11:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08027_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 12:11:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08027_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08027_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 12:11:49 2011] fullrun_ccd2_acisf08027_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 12:11:49 2011] fullrun_ccd2_acisf08027_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 12:11:49 2011] Fit fullrun_ccd2_acisf08027_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 12:12:10 2011] Spatial fit model total counts = 174.673000, observed total counts = 176.000000
[Wed Sep 21 12:12:10 2011] Offset between fit and detection position for source 11 = 0.655122 pixels
[Wed Sep 21 12:12:10 2011] 174.991500 total counts/ 10.479500 bgd. counts: snr = 50.819139
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.655122 pixels
  Position = (764.6, 658.9) = 9 58 41.81 1 53 18.1
  Extent = 1.3 (1.1-1.4)", rotation angle = 0
  Source counts = 164.5 +/- 13.2
  Background counts = 10.5
  Rate = 0.003 +/- 0.0003
[Wed Sep 21 12:12:10 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 12:12:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 12:12:10 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 12:12:10 2011] Source does appear to be extended
[Wed Sep 21 12:12:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 12:13:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 12:13:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 12:13:42 2011] Initial guess for spatial extent in simple fitting = 1.25"
[Wed Sep 21 12:13:42 2011] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.968
[Wed Sep 21 12:13:42 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.25"
[Wed Sep 21 12:13:43 2011] fullrun_ccd2_acisf08027_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 12:13:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08027_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 12:13:43 2011] fullrun_ccd2_acisf08027_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 12:13:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08027_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 12:13:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08027_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08027_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 12:13:44 2011] fullrun_ccd2_acisf08027_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 12:13:44 2011] fullrun_ccd2_acisf08027_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 12:13:44 2011] Fit fullrun_ccd2_acisf08027_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 12:14:11 2011] Spatial fit model total counts = 177.939000, observed total counts = 178.000000
[Wed Sep 21 12:14:11 2011] Offset between fit and detection position for source 11 = 0.045877 pixels
[Wed Sep 21 12:14:11 2011] 178.200300 total counts/ 12.316300 bgd. counts: snr = 47.267689
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.045877 pixels
  Position = (764.6, 658.9) = 9 58 41.81 1 53 18.1
  Extent = 1.3 (1.1-1.4)", rotation angle = 0
  Source counts = 165.9 +/- 13.3
  Background counts = 12.3
  Rate = 0.003 +/- 0.0003
[Wed Sep 21 12:14:11 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 12:14:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 12:14:11 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 12:14:11 2011] Source does appear to be extended
[Wed Sep 21 12:14:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 12:17:52 2011] Not overwriting source region fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_src.reg
[Wed Sep 21 12:17:52 2011] Extracting stamp from image fullrun_ccd2_acisf08027_pi14-548_cl_sm2.00.img.gz, (707, 601) - (822, 716)
[Wed Sep 21 12:17:52 2011] Writing fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11.gif
[Wed Sep 21 12:18:02 2011] ../../acisf08027/products/events/fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_src.evt and ../../acisf08027/products/events/fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Wed Sep 21 12:18:02 2011] Size of ../../acisf08027/products/events/fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_src.evt.gz[events] = 174 counts
[Wed Sep 21 12:18:02 2011] Mean chipx,y = (363.68, 507.44)
[Wed Sep 21 12:18:02 2011] Mean tdetx,y = (3568.44, 3722.32)
[Wed Sep 21 12:18:02 2011] chipx,y range = (341.00-383.00, 488.00-533.00)
[Wed Sep 21 12:18:02 2011] Size of ../../acisf08027/products/events/fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 69 counts
[Wed Sep 21 12:18:02 2011] ../../acisf08027/products/images/fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_src.img and ../../acisf08027/products/images/fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Wed Sep 21 12:18:02 2011] ../../acisf08027/products/spectra/fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_src.pi and ../../acisf08027/products/spectra/fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Wed Sep 21 12:18:07 2011] ../../acisf08027/products/lightcurves/fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_src.lc and ../../acisf08027/products/lightcurves/fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Wed Sep 21 12:19:49 2011] Keeping rmf generated by specextract
[Wed Sep 21 12:19:49 2011] 183.03
[Wed Sep 21 12:21:50 2011] Updating aperture counts using extracted products
[Wed Sep 21 12:21:51 2011] Error reading totcts from fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_src.pi.gz
[Wed Sep 21 12:21:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 12:21:51 2011] Using photon index=1.80, rate=0.00336, arf fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11.arf
[Wed Sep 21 12:21:51 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 12:21:51 2011] Updating source flux to 4.2e-14
[Wed Sep 21 12:22:01 2011] Reading fit data from acisf08027/analysis//spectral/fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_pl.csv
[Wed Sep 21 12:22:01 2011] Spectral fit parameter nH value = 1.04622e+21
[Wed Sep 21 12:22:01 2011] Spectral fit parameter PhoIndex value = 1.92361
[Wed Sep 21 12:22:01 2011] Failed to get F(0.3-8.0) from acisf08027/analysis//spectral/fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 12:22:01 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 12:22:01 2011] Using Nh = 1e+21, photon index=1.92, rate=0.00336, arf fullrun_ccd2_acisf08027_pi14-548_pass1_cl_src11.arf
[Wed Sep 21 12:22:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 12:22:01 2011] Updating source flux to 3.9e-14