[Wed Sep 21 20:41:45 2011] Detection parameters:
  Position = (185.6, 1006.6) = 10 0 31.63 1 47 57.9
  Extent = 2.4" x 1.4", rotation angle = 103 degrees
  Source counts = 143.7 +/- 12.8
  Background counts = 19.3
  Rate = 0.003 +/- 0.0003

[Wed Sep 21 20:41:48 2011] Off-axis axis estimate = 6.43'
[Wed Sep 21 20:43:16 2011] Using EEF radius (= 1.86 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:43:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 20:43:16 2011] Initial guess for spatial extent in simple fitting = 1.86"
[Wed Sep 21 20:43:16 2011] source mask rpix=3.8, npix_max = 72, mask sum = 81, frac = 1.110
[Wed Sep 21 20:43:16 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.86"
[Wed Sep 21 20:43:17 2011] fullrun_ccd2_acisf08024_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 20:43:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08024_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 20:43:17 2011] fullrun_ccd2_acisf08024_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 20:43:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08024_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 20:43:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08024_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08024_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:43:17 2011] fullrun_ccd2_acisf08024_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 20:43:17 2011] fullrun_ccd2_acisf08024_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 20:43:17 2011] Fit fullrun_ccd2_acisf08024_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 20:43:32 2011] Spatial fit model total counts = 169.744000, observed total counts = 171.000000
[Wed Sep 21 20:43:32 2011] Offset between fit and detection position for source 1 = 0.958247 pixels
[Wed Sep 21 20:43:32 2011] 168.345200 total counts/ 47.266200 bgd. counts: snr = 17.611384
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.958247 pixels
  Position = (186.0, 1007.5) = 10 0 31.63 1 47 58.1
  Extent = 1.8 (1.5-2.2)", rotation angle = 0
  Source counts = 121.1 +/- 13.0
  Background counts = 47.3
  Rate = 0.002 +/- 0.0003
[Wed Sep 21 20:43:32 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:43:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:43:32 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:43:32 2011] Source does appear to be extended
[Wed Sep 21 20:43:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:44:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:44:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 20:44:09 2011] Initial guess for spatial extent in simple fitting = 1.84"
[Wed Sep 21 20:44:09 2011] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.006
[Wed Sep 21 20:44:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.84"
[Wed Sep 21 20:44:09 2011] fullrun_ccd2_acisf08024_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 20:44:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08024_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 20:44:09 2011] fullrun_ccd2_acisf08024_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 20:44:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08024_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 20:44:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08024_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08024_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:44:09 2011] fullrun_ccd2_acisf08024_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 20:44:09 2011] fullrun_ccd2_acisf08024_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 20:44:09 2011] Fit fullrun_ccd2_acisf08024_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 20:44:24 2011] Spatial fit model total counts = 168.994000, observed total counts = 169.000000
[Wed Sep 21 20:44:24 2011] Offset between fit and detection position for source 1 = 0.098905 pixels
[Wed Sep 21 20:44:24 2011] 167.835500 total counts/ 50.304500 bgd. counts: snr = 16.571011
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.098905 pixels
  Position = (185.9, 1007.4) = 10 0 31.63 1 47 58.0
  Extent = 1.7 (1.5-2.1)", rotation angle = 0
  Source counts = 117.5 +/- 13.0
  Background counts = 50.3
  Rate = 0.002 +/- 0.0003
[Wed Sep 21 20:44:24 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:44:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:44:24 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:44:24 2011] Source does appear to be extended
[Wed Sep 21 20:44:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:47:43 2011] Not overwriting source region fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 21 20:47:43 2011] Extracting stamp from image fullrun_ccd2_acisf08024_pi14-548_cl_sm2.00.img.gz, (106, 928) - (266, 1087)
[Wed Sep 21 20:47:43 2011] Writing fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1.gif
[Wed Sep 21 20:47:44 2011] ../../acisf08024/products/events/fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_src.evt and ../../acisf08024/products/events/fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 21 20:47:44 2011] Size of ../../acisf08024/products/events/fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_src.evt.gz[events] = 158 counts
[Wed Sep 21 20:47:44 2011] Mean chipx,y = (853.02, 998.23)
[Wed Sep 21 20:47:44 2011] Mean tdetx,y = (4059.23, 3232.98)
[Wed Sep 21 20:47:44 2011] chipx,y range = (829.00-879.00, 971.00-1022.00)
[Wed Sep 21 20:47:44 2011] Size of ../../acisf08024/products/events/fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 101 counts
[Wed Sep 21 20:47:44 2011] ../../acisf08024/products/images/fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_src.img and ../../acisf08024/products/images/fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 21 20:47:44 2011] ../../acisf08024/products/spectra/fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_src.pi and ../../acisf08024/products/spectra/fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 21 20:47:47 2011] ../../acisf08024/products/lightcurves/fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_src.lc and ../../acisf08024/products/lightcurves/fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 21 20:48:37 2011] Keeping rmf generated by specextract
[Wed Sep 21 20:48:37 2011] 172.092
[Wed Sep 21 20:51:07 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:51:07 2011] Error reading totcts from fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 21 20:51:07 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:51:07 2011] Using photon index=1.80, rate=0.00238, arf fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 20:51:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:51:07 2011] Updating source flux to 3.2e-14
[Wed Sep 21 20:51:18 2011] Reading fit data from acisf08024/analysis//spectral/fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 21 20:51:18 2011] Spectral fit parameter nH value = 1.52464e+13
[Wed Sep 21 20:51:18 2011] Spectral fit parameter PhoIndex value = 1.92465
[Wed Sep 21 20:51:18 2011] Failed to get F(0.3-8.0) from acisf08024/analysis//spectral/fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 20:51:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:51:18 2011] Using Nh = 1.5e+13, photon index=1.92, rate=0.00238, arf fullrun_ccd2_acisf08024_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 20:51:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:51:18 2011] Updating source flux to 3.2e-14