[Sat Oct  1 11:51:31 2011] Detection parameters:
  Position = (1068.7, 734.1) = 9 58 42.95 2 1 25.8
  Extent = 0.8" x 0.6", rotation angle = 85 degrees
  Source counts = 17.5 +/- 4.4
  Background counts = 1.5
  Rate = 0.0004 +/- 9e-05

[Sat Oct  1 11:51:33 2011] Off-axis axis estimate = 4.48'
[Sat Oct  1 11:52:38 2011] Using EEF radius (= 0.99 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 11:52:38 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Sat Oct  1 11:52:38 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.996
[Sat Oct  1 11:52:38 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.99"
[Sat Oct  1 11:52:39 2011] fullrun_ccd2_acisf08021_pi14-548_cl_pass0_src12.ximg exists
[Sat Oct  1 11:52:39 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf08021_pi14-548_cl_pass0_src12.csv
[Sat Oct  1 11:52:39 2011] fullrun_ccd2_acisf08021_pi14-548_cl_pass0_src12_1.ximg exists
[Sat Oct  1 11:52:39 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf08021_pi14-548_cl_pass0_src12.csv
[Sat Oct  1 11:52:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08021_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08021_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 11:52:39 2011] fullrun_ccd2_acisf08021_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sat Oct  1 11:52:39 2011] fullrun_ccd2_acisf08021_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Oct  1 11:52:39 2011] Fit fullrun_ccd2_acisf08021_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Oct  1 11:52:50 2011] Spatial fit model total counts = 23.601900, observed total counts = 25.000000
[Sat Oct  1 11:52:50 2011] Offset between fit and detection position for source 11 = 1.409817 pixels
[Sat Oct  1 11:52:50 2011] 24.246668 total counts/ 0.215268 bgd. counts: snr = 51.795179
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.409817 pixels
  Position = (1069.7, 733.1) = 9 58 42.94 2 1 25.1
  Extent = 1.3 (1.0-1.6)", rotation angle = 0
  Source counts = 24.0 +/- 4.9
  Background counts = 0.2
  Rate = 0.0005 +/- 0.0001
[Sat Oct  1 11:52:50 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 11:52:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 11:52:50 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 11:52:50 2011] Source does appear to be extended
[Sat Oct  1 11:52:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 11:53:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 11:53:16 2011] Initial guess for spatial extent in simple fitting = 1.25"
[Sat Oct  1 11:53:16 2011] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Sat Oct  1 11:53:16 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 1.25"
[Sat Oct  1 11:53:16 2011] fullrun_ccd2_acisf08021_pi14-548_cl_pass1_src12.ximg exists
[Sat Oct  1 11:53:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08021_pi14-548_cl_pass1_src12.csv
[Sat Oct  1 11:53:16 2011] fullrun_ccd2_acisf08021_pi14-548_cl_pass1_src12_1.ximg exists
[Sat Oct  1 11:53:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08021_pi14-548_cl_pass1_src12.csv
[Sat Oct  1 11:53:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08021_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08021_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 11:53:17 2011] fullrun_ccd2_acisf08021_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sat Oct  1 11:53:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08021_pi14-548_cl_pass1_tfrozen_src12.csv
[Sat Oct  1 11:53:17 2011] fullrun_ccd2_acisf08021_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Oct  1 11:53:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08021_pi14-548_cl_pass1_tfrozen_src12.csv
[Sat Oct  1 11:53:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08021_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08021_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 11:53:27 2011] Spatial fit model total counts = 23.370600, observed total counts = 27.000000
[Sat Oct  1 11:53:27 2011] Offset between fit and detection position for source 11 = 1.882528 pixels
[Sat Oct  1 11:53:27 2011] 22.549947 total counts/ 0.165347 bgd. counts: snr = 55.049221
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.882528 pixels
  Position = (1069.1, 734.9) = 9 58 42.96 2 1 26.0
  Extent = 1.1 (0.8-1.5)", rotation angle = 0
  Source counts = 22.4 +/- 4.7
  Background counts = 0.2
  Rate = 0.0005 +/- 0.0001
[Sat Oct  1 11:53:28 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 11:53:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 11:53:28 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 11:53:28 2011] Source does appear to be extended
[Sat Oct  1 11:53:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 11:55:42 2011] Not overwriting source region fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11_src.reg
[Sat Oct  1 11:55:42 2011] Extracting stamp from image fullrun_ccd2_acisf08021_pi14-548_cl_sm2.00.img.gz, (1020, 686) - (1118, 784)
[Sat Oct  1 11:55:42 2011] Writing fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11.gif
[Sat Oct  1 11:56:18 2011] ../../acisf08021/products/events/fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11_src.evt and ../../acisf08021/products/events/fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Sat Oct  1 11:56:18 2011] Size of ../../acisf08021/products/events/fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11_src.evt.gz[events] = 27 counts
[Sat Oct  1 11:56:18 2011] Mean chipx,y = (58.67, 502.33)
[Sat Oct  1 11:56:18 2011] Mean tdetx,y = (3563.33, 4027.33)
[Sat Oct  1 11:56:18 2011] chipx,y range = (36.00-72.00, 483.00-526.00)
[Sat Oct  1 11:56:18 2011] Size of ../../acisf08021/products/events/fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 44 counts
[Sat Oct  1 11:56:18 2011] ../../acisf08021/products/images/fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11_src.img and ../../acisf08021/products/images/fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Sat Oct  1 11:56:18 2011] ../../acisf08021/products/spectra/fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11_src.pi and ../../acisf08021/products/spectra/fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Sat Oct  1 11:56:18 2011] Not generating rmf since there are only 22 counts
[Sat Oct  1 11:56:21 2011] ../../acisf08021/products/lightcurves/fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11_src.lc and ../../acisf08021/products/lightcurves/fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Sat Oct  1 11:57:05 2011] 188.862
[Sat Oct  1 11:58:33 2011] Updating aperture counts using extracted products
[Sat Oct  1 11:58:33 2011] Error reading totcts from fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11_src.pi.gz
[Sat Oct  1 11:58:33 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 11:58:33 2011] Using photon index=1.80, rate=0.000459, arf fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11.arf
[Sat Oct  1 11:58:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 11:58:33 2011] Updating source flux to 5.6e-15
[Sat Oct  1 11:58:49 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct  1 11:58:50 2011] acisf08021/analysis//spectral/fullrun_ccd2_acisf08021_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete