[Sat Oct  1 11:51:27 2011] Detection parameters:
  Position = (138.9, 816.5) = 9 58 40.62 2 4 26.6
  Extent = 0.5" x 0.5", rotation angle = 155 degrees
  Source counts = 206.0 +/- 14.4
  Background counts = 2.0
  Rate = 0.004 +/- 0.0003

[Sat Oct  1 11:51:28 2011] Off-axis axis estimate = 2.25'
[Sat Oct  1 11:52:36 2011] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 11:52:36 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Sat Oct  1 11:52:36 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.100
[Sat Oct  1 11:52:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.46"
[Sat Oct  1 11:52:37 2011] fullrun_ccd0_acisf08021_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  1 11:52:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08021_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 11:52:37 2011] fullrun_ccd0_acisf08021_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  1 11:52:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08021_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 11:52:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf08021_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf08021_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 11:52:37 2011] fullrun_ccd0_acisf08021_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  1 11:52:37 2011] fullrun_ccd0_acisf08021_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  1 11:52:37 2011] Fit fullrun_ccd0_acisf08021_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  1 11:52:47 2011] Spatial fit model total counts = 211.483000, observed total counts = 211.000000
[Sat Oct  1 11:52:47 2011] Offset between fit and detection position for source 1 = 0.737184 pixels
[Sat Oct  1 11:52:47 2011] 211.687060 total counts/ 7.169060 bgd. counts: snr = 76.383654
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.737184 pixels
  Position = (139.5, 817.0) = 9 58 40.61 2 4 26.6
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 204.5 +/- 14.5
  Background counts = 7.2
  Rate = 0.004 +/- 0.0003
[Sat Oct  1 11:52:47 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 11:52:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 11:52:47 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 11:52:47 2011] Source does appear to be extended
[Sat Oct  1 11:52:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 11:53:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 11:53:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 11:53:14 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Sat Oct  1 11:53:14 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.195
[Sat Oct  1 11:53:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.53"
[Sat Oct  1 11:53:14 2011] fullrun_ccd0_acisf08021_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  1 11:53:14 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf08021_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 11:53:14 2011] fullrun_ccd0_acisf08021_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  1 11:53:14 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf08021_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 11:53:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf08021_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf08021_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 11:53:14 2011] fullrun_ccd0_acisf08021_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  1 11:53:15 2011] fullrun_ccd0_acisf08021_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  1 11:53:15 2011] Fit fullrun_ccd0_acisf08021_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  1 11:53:24 2011] Spatial fit model total counts = 205.636000, observed total counts = 210.000000
[Sat Oct  1 11:53:24 2011] Offset between fit and detection position for source 1 = 0.003564 pixels
[Sat Oct  1 11:53:24 2011] 206.216800 total counts/ 5.653800 bgd. counts: snr = 84.349128
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003564 pixels
  Position = (139.5, 817.0) = 9 58 40.61 2 4 26.6
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 200.6 +/- 14.4
  Background counts = 5.7
  Rate = 0.004 +/- 0.0003
[Sat Oct  1 11:53:24 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 11:53:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 11:53:24 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 11:53:24 2011] Source does appear to be extended
[Sat Oct  1 11:53:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 11:53:51 2011] Not overwriting source region fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_src.reg
[Sat Oct  1 11:53:51 2011] Extracting stamp from image fullrun_ccd0_acisf08021_pi14-548_cl_sm2.00.img.gz, (115, 792) - (164, 842)
[Sat Oct  1 11:53:51 2011] Writing fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1.gif
[Sat Oct  1 11:53:52 2011] ../../acisf08021/products/events/fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_src.evt and ../../acisf08021/products/events/fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct  1 11:53:52 2011] Size of ../../acisf08021/products/events/fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_src.evt.gz[events] = 206 counts
[Sat Oct  1 11:53:52 2011] Mean chipx,y = (939.28, 842.02)
[Sat Oct  1 11:53:52 2011] Mean tdetx,y = (3903.02, 4192.72)
[Sat Oct  1 11:53:52 2011] chipx,y range = (921.00-957.00, 822.00-858.00)
[Sat Oct  1 11:53:52 2011] Size of ../../acisf08021/products/events/fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 9 counts
[Sat Oct  1 11:53:52 2011] ../../acisf08021/products/images/fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_src.img and ../../acisf08021/products/images/fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct  1 11:53:52 2011] ../../acisf08021/products/spectra/fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_src.pi and ../../acisf08021/products/spectra/fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct  1 11:53:55 2011] ../../acisf08021/products/lightcurves/fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_src.lc and ../../acisf08021/products/lightcurves/fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct  1 11:54:57 2011] Keeping rmf generated by specextract
[Sat Oct  1 11:54:58 2011] 191.026
[Sat Oct  1 11:58:32 2011] Updating aperture counts using extracted products
[Sat Oct  1 11:58:32 2011] Error reading totcts from fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct  1 11:58:32 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 11:58:32 2011] Using photon index=1.80, rate=0.00411, arf fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 11:58:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 11:58:32 2011] Updating source flux to 5e-14
[Sat Oct  1 11:58:47 2011] Reading fit data from acisf08021/analysis//spectral/fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct  1 11:58:47 2011] Spectral fit parameter nH value = 1.33465e+21
[Sat Oct  1 11:58:47 2011] Spectral fit parameter PhoIndex value = 1.6025
[Sat Oct  1 11:58:47 2011] Failed to get F(0.3-8.0) from acisf08021/analysis//spectral/fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 11:58:47 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 11:58:47 2011] Using Nh = 1.3e+21, photon index=1.60, rate=0.00411, arf fullrun_ccd0_acisf08021_pi14-548_pass1_cl_src1.arf
[Sat Oct  1 11:58:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 11:58:47 2011] Updating source flux to 5.2e-14