[Thu Sep 22 15:59:03 2011] Detection parameters:
  Position = (984.7, 463.7) = 10 0 16.28 1 51 4.1
  Extent = 0.6" x 0.5", rotation angle = 135 degrees
  Source counts = 127.0 +/- 11.8
  Background counts = 12.0
  Rate = 0.003 +/- 0.0003

[Thu Sep 22 15:59:05 2011] Off-axis axis estimate = 6.48'
[Thu Sep 22 16:00:26 2011] Using EEF radius (= 1.88 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 16:00:26 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 16:00:26 2011] Initial guess for spatial extent in simple fitting = 1.88"
[Thu Sep 22 16:00:26 2011] source mask rpix=3.8, npix_max = 74, mask sum = 72, frac = 0.962
[Thu Sep 22 16:00:26 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.88"
[Thu Sep 22 16:00:26 2011] fullrun_ccd2_acisf08018_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 16:00:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08018_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 16:00:26 2011] fullrun_ccd2_acisf08018_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 16:00:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08018_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 16:00:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08018_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08018_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 16:00:27 2011] fullrun_ccd2_acisf08018_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 16:00:27 2011] fullrun_ccd2_acisf08018_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 16:00:27 2011] Fit fullrun_ccd2_acisf08018_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 16:00:42 2011] Spatial fit model total counts = 157.169000, observed total counts = 152.000000
[Thu Sep 22 16:00:42 2011] Offset between fit and detection position for source 20 = 0.462836 pixels
[Thu Sep 22 16:00:42 2011] 157.834300 total counts/ 24.072300 bgd. counts: snr = 27.263020
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.462836 pixels
  Position = (985.1, 464.0) = 10 0 16.28 1 51 4.0
  Extent = 2.0 (1.7-2.2)", rotation angle = 0
  Source counts = 133.8 +/- 12.6
  Background counts = 24.1
  Rate = 0.003 +/- 0.0003
[Thu Sep 22 16:00:42 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 16:00:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 16:00:42 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 16:00:42 2011] Source does appear to be extended
[Thu Sep 22 16:00:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 16:01:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 16:01:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 16:01:15 2011] Initial guess for spatial extent in simple fitting = 1.98"
[Thu Sep 22 16:01:15 2011] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.990
[Thu Sep 22 16:01:15 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.98"
[Thu Sep 22 16:01:17 2011] fullrun_ccd2_acisf08018_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 16:01:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08018_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 16:01:17 2011] fullrun_ccd2_acisf08018_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 16:01:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08018_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 16:01:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08018_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08018_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 16:01:17 2011] fullrun_ccd2_acisf08018_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 16:01:17 2011] fullrun_ccd2_acisf08018_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 16:01:17 2011] Fit fullrun_ccd2_acisf08018_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 16:01:31 2011] Spatial fit model total counts = 161.342000, observed total counts = 156.000000
[Thu Sep 22 16:01:31 2011] Offset between fit and detection position for source 20 = 0.042671 pixels
[Thu Sep 22 16:01:31 2011] 162.197300 total counts/ 30.112300 bgd. counts: snr = 24.070302
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.042671 pixels
  Position = (985.0, 464.0) = 10 0 16.29 1 51 4.1
  Extent = 2.0 (1.7-2.2)", rotation angle = 0
  Source counts = 132.1 +/- 12.7
  Background counts = 30.1
  Rate = 0.003 +/- 0.0003
[Thu Sep 22 16:01:31 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 16:01:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 16:01:31 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 16:01:31 2011] Source does appear to be extended
[Thu Sep 22 16:01:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 16:05:15 2011] Not overwriting source region fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_src.reg
[Thu Sep 22 16:05:15 2011] Extracting stamp from image fullrun_ccd2_acisf08018_pi14-548_cl_sm2.00.img.gz, (895, 374) - (1075, 554)
[Thu Sep 22 16:05:15 2011] Writing fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20.gif
[Thu Sep 22 16:05:17 2011] ../../acisf08018/products/events/fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_src.evt and ../../acisf08018/products/events/fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Thu Sep 22 16:05:17 2011] Size of ../../acisf08018/products/events/fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_src.evt.gz[events] = 149 counts
[Thu Sep 22 16:05:17 2011] Mean chipx,y = (215.16, 270.81)
[Thu Sep 22 16:05:17 2011] Mean tdetx,y = (3331.81, 3870.84)
[Thu Sep 22 16:05:17 2011] chipx,y range = (189.00-239.00, 248.00-302.00)
[Thu Sep 22 16:05:17 2011] Size of ../../acisf08018/products/events/fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 132 counts
[Thu Sep 22 16:05:17 2011] ../../acisf08018/products/images/fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_src.img and ../../acisf08018/products/images/fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Thu Sep 22 16:05:17 2011] ../../acisf08018/products/spectra/fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_src.pi and ../../acisf08018/products/spectra/fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Thu Sep 22 16:05:20 2011] ../../acisf08018/products/lightcurves/fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_src.lc and ../../acisf08018/products/lightcurves/fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Thu Sep 22 16:06:50 2011] Keeping rmf generated by specextract
[Thu Sep 22 16:06:50 2011] 173.397
[Thu Sep 22 16:08:26 2011] Updating aperture counts using extracted products
[Thu Sep 22 16:08:26 2011] Error reading totcts from fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_src.pi.gz
[Thu Sep 22 16:08:26 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 16:08:26 2011] Using photon index=1.80, rate=0.00283, arf fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20.arf
[Thu Sep 22 16:08:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 16:08:26 2011] Updating source flux to 3.8e-14
[Thu Sep 22 16:08:50 2011] Reading fit data from acisf08018/analysis//spectral/fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_pl.csv
[Thu Sep 22 16:08:50 2011] Spectral fit parameter nH value = 2.3182e+14
[Thu Sep 22 16:08:50 2011] Spectral fit parameter PhoIndex value = 1.94828
[Thu Sep 22 16:08:50 2011] Failed to get F(0.3-8.0) from acisf08018/analysis//spectral/fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 16:08:50 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 16:08:50 2011] Using Nh = 2.3e+14, photon index=1.95, rate=0.00283, arf fullrun_ccd2_acisf08018_pi14-548_pass1_cl_src20.arf
[Thu Sep 22 16:08:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 16:08:50 2011] Updating source flux to 3.8e-14