[Thu Sep 22 04:26:08 2011] Detection parameters:
  Position = (721.6, 497.7) = 10 1 3.38 1 56 50.3
  Extent = 0.5" x 0.5", rotation angle = 131 degrees
  Source counts = 25.9 +/- 5.2
  Background counts = 1.1
  Rate = 0.0006 +/- 0.0001

[Thu Sep 22 04:26:11 2011] Off-axis axis estimate = 4.30'
[Thu Sep 22 04:27:45 2011] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 04:27:45 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Thu Sep 22 04:27:45 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.106
[Thu Sep 22 04:27:45 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 0.92"
[Thu Sep 22 04:27:46 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src12.ximg exists
[Thu Sep 22 04:27:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src12.csv
[Thu Sep 22 04:27:46 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src12_1.ximg exists
[Thu Sep 22 04:27:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src12.csv
[Thu Sep 22 04:27:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 04:27:46 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Thu Sep 22 04:27:46 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Sep 22 04:27:46 2011] Fit fullrun_ccd3_acisf08017_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Sep 22 04:28:09 2011] Spatial fit model total counts = 25.888800, observed total counts = 27.000000
[Thu Sep 22 04:28:09 2011] Offset between fit and detection position for source 5 = 0.714276 pixels
[Thu Sep 22 04:28:09 2011] 25.793861 total counts/ 0.154261 bgd. counts: snr = 65.280455
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.714276 pixels
  Position = (722.2, 498.1) = 10 1 3.38 1 56 50.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 25.6 +/- 5.1
  Background counts = 0.2
  Rate = 0.0005 +/- 0.0001
[Thu Sep 22 04:28:09 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 04:28:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 04:28:09 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 04:28:09 2011] Source does appear to be extended
[Thu Sep 22 04:28:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 04:28:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 04:28:38 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Thu Sep 22 04:28:38 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.068
[Thu Sep 22 04:28:38 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.58"
[Thu Sep 22 04:28:39 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src12.ximg exists
[Thu Sep 22 04:28:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src12.csv
[Thu Sep 22 04:28:39 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src12_1.ximg exists
[Thu Sep 22 04:28:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src12.csv
[Thu Sep 22 04:28:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 04:28:39 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Thu Sep 22 04:28:39 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Sep 22 04:28:39 2011] Fit fullrun_ccd3_acisf08017_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Thu Sep 22 04:28:58 2011] Spatial fit model total counts = 26.266100, observed total counts = 27.000000
[Thu Sep 22 04:28:58 2011] Offset between fit and detection position for source 5 = 0.120082 pixels
[Thu Sep 22 04:28:58 2011] 26.170776 total counts/ 0.029976 bgd. counts: snr = 150.983378
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.120082 pixels
  Position = (722.3, 498.2) = 10 1 3.38 1 56 50.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 26.1 +/- 5.1
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Thu Sep 22 04:28:58 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 04:28:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 04:28:58 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 04:28:58 2011] Source does appear to be extended
[Thu Sep 22 04:28:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 04:33:07 2011] Not overwriting source region fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5_src.reg
[Thu Sep 22 04:33:07 2011] Extracting stamp from image fullrun_ccd3_acisf08017_pi14-548_cl_sm2.00.img.gz, (694, 470) - (750, 526)
[Thu Sep 22 04:33:07 2011] Writing fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5.gif
[Thu Sep 22 04:33:41 2011] ../../acisf08017/products/events/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5_src.evt and ../../acisf08017/products/events/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu Sep 22 04:33:41 2011] Size of ../../acisf08017/products/events/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5_src.evt.gz[events] = 27 counts
[Thu Sep 22 04:33:41 2011] Mean chipx,y = (569.59, 659.19)
[Thu Sep 22 04:33:41 2011] Mean tdetx,y = (4472.81, 3630.59)
[Thu Sep 22 04:33:41 2011] chipx,y range = (555.00-587.00, 645.00-676.00)
[Thu Sep 22 04:33:41 2011] Size of ../../acisf08017/products/events/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 8 counts
[Thu Sep 22 04:33:41 2011] ../../acisf08017/products/images/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5_src.img and ../../acisf08017/products/images/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu Sep 22 04:33:41 2011] ../../acisf08017/products/spectra/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5_src.pi and ../../acisf08017/products/spectra/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu Sep 22 04:33:41 2011] Not generating rmf since there are only 26 counts
[Thu Sep 22 04:33:44 2011] ../../acisf08017/products/lightcurves/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5_src.lc and ../../acisf08017/products/lightcurves/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu Sep 22 04:34:19 2011] 186.716
[Thu Sep 22 04:34:33 2011] Updating aperture counts using extracted products
[Thu Sep 22 04:34:33 2011] Error reading totcts from fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5_src.pi.gz
[Thu Sep 22 04:34:33 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 04:34:33 2011] Using photon index=1.80, rate=0.000559, arf fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src5.arf
[Thu Sep 22 04:34:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 04:34:33 2011] Updating source flux to 6.9e-15
[Thu Sep 22 04:34:51 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting