[Thu Sep 22 04:26:10 2011] Detection parameters:
  Position = (393.5, 240.3) = 10 1 14.15 1 54 43.6
  Extent = 2.1" x 1.2", rotation angle = 93 degrees
  Source counts = 112.1 +/- 11.1
  Background counts = 10.9
  Rate = 0.002 +/- 0.0002

[Thu Sep 22 04:26:11 2011] Off-axis axis estimate = 6.47'
[Thu Sep 22 04:27:45 2011] Using EEF radius (= 1.88 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 04:27:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 04:27:45 2011] Initial guess for spatial extent in simple fitting = 1.88"
[Thu Sep 22 04:27:45 2011] source mask rpix=3.8, npix_max = 74, mask sum = 81, frac = 1.086
[Thu Sep 22 04:27:45 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.88"
[Thu Sep 22 04:27:45 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src2.ximg exists
[Thu Sep 22 04:27:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src2.csv
[Thu Sep 22 04:27:45 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src2_1.ximg exists
[Thu Sep 22 04:27:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src2.csv
[Thu Sep 22 04:27:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 04:27:46 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu Sep 22 04:27:46 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Sep 22 04:27:46 2011] Fit fullrun_ccd3_acisf08017_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Sep 22 04:28:09 2011] Spatial fit model total counts = 118.594000, observed total counts = 117.000000
[Thu Sep 22 04:28:09 2011] Offset between fit and detection position for source 20 = 2.156818 pixels
[Thu Sep 22 04:28:09 2011] 118.337700 total counts/ 36.125800 bgd. counts: snr = 13.678105
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.156818 pixels
  Position = (394.0, 242.4) = 10 1 14.15 1 54 44.4
  Extent = 1.2 (1.0-1.6)", rotation angle = 0
  Source counts = 82.2 +/- 10.9
  Background counts = 36.1
  Rate = 0.002 +/- 0.0002
[Thu Sep 22 04:28:09 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 04:28:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 04:28:09 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 04:28:09 2011] Source does appear to be extended
[Thu Sep 22 04:28:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 04:28:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 04:28:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 04:28:38 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Thu Sep 22 04:28:38 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.987
[Thu Sep 22 04:28:38 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.24"
[Thu Sep 22 04:28:38 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src2.ximg exists
[Thu Sep 22 04:28:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src2.csv
[Thu Sep 22 04:28:38 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src2_1.ximg exists
[Thu Sep 22 04:28:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src2.csv
[Thu Sep 22 04:28:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 04:28:39 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu Sep 22 04:28:39 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Sep 22 04:28:39 2011] Fit fullrun_ccd3_acisf08017_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Sep 22 04:28:58 2011] Spatial fit model total counts = 100.160000, observed total counts = 99.000000
[Thu Sep 22 04:28:58 2011] Offset between fit and detection position for source 20 = 0.331286 pixels
[Thu Sep 22 04:28:58 2011] 97.911300 total counts/ 22.031900 bgd. counts: snr = 16.165826
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.331286 pixels
  Position = (394.3, 242.5) = 10 1 14.14 1 54 44.5
  Extent = 1.1 (0.9-1.5)", rotation angle = 0
  Source counts = 75.9 +/- 9.9
  Background counts = 22.0
  Rate = 0.002 +/- 0.0002
[Thu Sep 22 04:28:58 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 04:28:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 04:28:58 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 04:28:58 2011] Source does appear to be extended
[Thu Sep 22 04:28:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 04:33:07 2011] Not overwriting source region fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20_src.reg
[Thu Sep 22 04:33:07 2011] Extracting stamp from image fullrun_ccd3_acisf08017_pi14-548_cl_sm2.00.img.gz, (342, 190) - (447, 295)
[Thu Sep 22 04:33:07 2011] Writing fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20.gif
[Thu Sep 22 04:33:12 2011] ../../acisf08017/products/events/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20_src.evt and ../../acisf08017/products/events/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20_bgd.evt exist, delete to re-create
[Thu Sep 22 04:33:12 2011] Size of ../../acisf08017/products/events/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20_src.evt.gz[events] = 103 counts
[Thu Sep 22 04:33:12 2011] Mean chipx,y = (191.00, 825.16)
[Thu Sep 22 04:33:12 2011] Mean tdetx,y = (4306.84, 3252.00)
[Thu Sep 22 04:33:12 2011] chipx,y range = (171.00-209.00, 803.00-846.00)
[Thu Sep 22 04:33:12 2011] Size of ../../acisf08017/products/events/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 51 counts
[Thu Sep 22 04:33:12 2011] ../../acisf08017/products/images/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20_src.img and ../../acisf08017/products/images/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20_bgd.img exist, delete to re-create
[Thu Sep 22 04:33:12 2011] ../../acisf08017/products/spectra/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20_src.pi and ../../acisf08017/products/spectra/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20_bgd.pi exist, delete to re-create
[Thu Sep 22 04:33:12 2011] Not generating rmf since there are only 75 counts
[Thu Sep 22 04:33:16 2011] ../../acisf08017/products/lightcurves/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20_src.lc and ../../acisf08017/products/lightcurves/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20_bgd.lc exist, delete to re-create
[Thu Sep 22 04:34:18 2011] 173.088
[Thu Sep 22 04:34:32 2011] Updating aperture counts using extracted products
[Thu Sep 22 04:34:32 2011] Error reading totcts from fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20_src.pi.gz
[Thu Sep 22 04:34:33 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 04:34:33 2011] Using photon index=1.80, rate=0.00162, arf fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src20.arf
[Thu Sep 22 04:34:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 04:34:33 2011] Updating source flux to 2.2e-14
[Thu Sep 22 04:34:51 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting