[Thu Sep 22 04:26:08 2011] Detection parameters:
  Position = (653.7, 402.6) = 10 1 5.61 1 56 3.5
  Extent = 1.0" x 0.5", rotation angle = 78 degrees
  Source counts = 171.2 +/- 13.2
  Background counts = 3.8
  Rate = 0.004 +/- 0.0003

[Thu Sep 22 04:26:11 2011] Off-axis axis estimate = 4.52'
[Thu Sep 22 04:27:45 2011] Using EEF radius (= 1.00 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 04:27:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 04:27:45 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Thu Sep 22 04:27:45 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.976
[Thu Sep 22 04:27:45 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.00"
[Thu Sep 22 04:27:45 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 04:27:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 04:27:45 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 04:27:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 04:27:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08017_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 04:27:46 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 04:27:46 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 04:27:46 2011] Fit fullrun_ccd3_acisf08017_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 04:28:09 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.698561 pixels away
[Thu Sep 22 04:28:09 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 04:28:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 04:28:09 2011] Assessing source extent using major
[Thu Sep 22 04:28:09 2011] Source does appear to be extended
[Thu Sep 22 04:28:09 2011] Computing asymmetry using major and minor axis, asym = 1.82
[Thu Sep 22 04:28:09 2011] Source is asymmetric
[Thu Sep 22 04:28:38 2011] Using EEF radius (= 1.00 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 04:28:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 04:28:38 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Thu Sep 22 04:28:38 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.976
[Thu Sep 22 04:28:38 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.00"
[Thu Sep 22 04:28:38 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 04:28:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 04:28:38 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 04:28:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 04:28:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08017_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 04:28:39 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 04:28:39 2011] fullrun_ccd3_acisf08017_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 04:28:39 2011] Fit fullrun_ccd3_acisf08017_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 04:28:58 2011] Spatial fit model total counts = 173.165000, observed total counts = 175.000000
[Thu Sep 22 04:28:58 2011] Offset between fit and detection position for source 1 = 0.410945 pixels
[Thu Sep 22 04:28:58 2011] 176.996700 total counts/ 37.693700 bgd. counts: snr = 22.689561
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.410945 pixels
  Position = (654.1, 402.7) = 10 1 5.62 1 56 3.3
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 139.3 +/- 13.3
  Background counts = 37.7
  Rate = 0.003 +/- 0.0003
[Thu Sep 22 04:28:58 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 04:28:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 04:28:58 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 04:28:58 2011] Source does appear to be extended
[Thu Sep 22 04:28:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 04:33:06 2011] Not overwriting source region fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_src.reg
[Thu Sep 22 04:33:06 2011] Extracting stamp from image fullrun_ccd3_acisf08017_pi14-548_cl_sm2.00.img.gz, (622, 370) - (687, 435)
[Thu Sep 22 04:33:06 2011] Writing fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1.gif
[Thu Sep 22 04:33:08 2011] ../../acisf08017/products/events/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_src.evt and ../../acisf08017/products/events/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Sep 22 04:33:08 2011] Size of ../../acisf08017/products/events/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_src.evt.gz[events] = 166 counts
[Thu Sep 22 04:33:08 2011] Mean chipx,y = (482.84, 735.16)
[Thu Sep 22 04:33:08 2011] Mean tdetx,y = (4396.84, 3543.84)
[Thu Sep 22 04:33:08 2011] chipx,y range = (465.00-501.00, 716.00-757.00)
[Thu Sep 22 04:33:08 2011] Size of ../../acisf08017/products/events/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 17 counts
[Thu Sep 22 04:33:08 2011] ../../acisf08017/products/images/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_src.img and ../../acisf08017/products/images/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Sep 22 04:33:08 2011] ../../acisf08017/products/spectra/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_src.pi and ../../acisf08017/products/spectra/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Sep 22 04:33:12 2011] ../../acisf08017/products/lightcurves/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_src.lc and ../../acisf08017/products/lightcurves/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Sep 22 04:34:18 2011] Keeping rmf generated by specextract
[Thu Sep 22 04:34:18 2011] 184.178
[Thu Sep 22 04:34:32 2011] Updating aperture counts using extracted products
[Thu Sep 22 04:34:32 2011] Error reading totcts from fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Sep 22 04:34:33 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 04:34:33 2011] Using photon index=1.80, rate=0.00298, arf fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 04:34:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 04:34:33 2011] Updating source flux to 3.7e-14
[Thu Sep 22 04:35:00 2011] Reading fit data from acisf08017/analysis//spectral/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_pl.csv
[Thu Sep 22 04:35:00 2011] Spectral fit parameter nH value = 7.20905e+20
[Thu Sep 22 04:35:00 2011] Spectral fit parameter PhoIndex value = 1.48861
[Thu Sep 22 04:35:00 2011] Failed to get F(0.3-8.0) from acisf08017/analysis//spectral/fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 04:35:00 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 04:35:00 2011] Using Nh = 7.2e+20, photon index=1.49, rate=0.00298, arf fullrun_ccd3_acisf08017_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 04:35:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 04:35:00 2011] Updating source flux to 4e-14