[Thu Sep 22 04:25:51 2011] Detection parameters:
  Position = (414.3, 161.5) = 10 0 31.63 1 47 57.9
  Extent = 1.7" x 1.1", rotation angle = 152 degrees
  Source counts = 114.5 +/- 11.4
  Background counts = 15.5
  Rate = 0.002 +/- 0.0002

[Thu Sep 22 04:25:53 2011] Off-axis axis estimate = 8.00'
[Thu Sep 22 04:27:38 2011] Using EEF radius (= 2.83 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 04:27:38 2011] Initial guess for spatial extent in simple fitting = 2.83"
[Thu Sep 22 04:27:38 2011] source mask rpix=5.7, npix_max = 156, mask sum = 169, frac = 1.083
[Thu Sep 22 04:27:38 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.83"
[Thu Sep 22 04:27:39 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass0_src3.ximg exists
[Thu Sep 22 04:27:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08017_pi14-548_cl_pass0_src3.csv
[Thu Sep 22 04:27:39 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass0_src3_1.ximg exists
[Thu Sep 22 04:27:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08017_pi14-548_cl_pass0_src3.csv
[Thu Sep 22 04:27:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf08017_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf08017_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 04:27:39 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Thu Sep 22 04:27:39 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Sep 22 04:27:39 2011] Fit fullrun_ccd0_acisf08017_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Sep 22 04:27:57 2011] Spatial fit model total counts = 143.995000, observed total counts = 144.000000
[Thu Sep 22 04:27:57 2011] Offset between fit and detection position for source 3 = 0.812474 pixels
[Thu Sep 22 04:27:57 2011] 143.248200 total counts/ 53.027400 bgd. counts: snr = 12.389578
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.812474 pixels
  Position = (414.6, 162.3) = 10 0 31.63 1 47 58.0
  Extent = 2.2 (1.7-2.8)", rotation angle = 0
  Source counts = 90.2 +/- 12.0
  Background counts = 53.0
  Rate = 0.002 +/- 0.0003
[Thu Sep 22 04:27:57 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 04:27:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 04:27:57 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 04:27:57 2011] Source does appear to be extended
[Thu Sep 22 04:27:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 04:28:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 04:28:34 2011] Initial guess for spatial extent in simple fitting = 2.20"
[Thu Sep 22 04:28:34 2011] source mask rpix=4.5, npix_max = 99, mask sum = 100, frac = 1.009
[Thu Sep 22 04:28:34 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.20"
[Thu Sep 22 04:28:35 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass1_src3.ximg exists
[Thu Sep 22 04:28:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08017_pi14-548_cl_pass1_src3.csv
[Thu Sep 22 04:28:35 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass1_src3_1.ximg exists
[Thu Sep 22 04:28:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08017_pi14-548_cl_pass1_src3.csv
[Thu Sep 22 04:28:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf08017_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf08017_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 04:28:36 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Thu Sep 22 04:28:36 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Sep 22 04:28:36 2011] Fit fullrun_ccd0_acisf08017_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Sep 22 04:28:50 2011] Spatial fit model total counts = 127.645000, observed total counts = 126.000000
[Thu Sep 22 04:28:50 2011] Offset between fit and detection position for source 3 = 0.421232 pixels
[Thu Sep 22 04:28:50 2011] 128.193800 total counts/ 49.056200 bgd. counts: snr = 11.298894
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.421232 pixels
  Position = (414.2, 162.3) = 10 0 31.65 1 47 58.0
  Extent = 2.0 (1.5-2.6)", rotation angle = 0
  Source counts = 79.1 +/- 11.3
  Background counts = 49.1
  Rate = 0.002 +/- 0.0002
[Thu Sep 22 04:28:50 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 04:28:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 04:28:50 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 04:28:50 2011] Source does appear to be extended
[Thu Sep 22 04:28:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 04:29:23 2011] Not overwriting source region fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3_src.reg
[Thu Sep 22 04:29:23 2011] Extracting stamp from image fullrun_ccd0_acisf08017_pi14-548_cl_sm2.00.img.gz, (324, 72) - (504, 252)
[Thu Sep 22 04:29:23 2011] Writing fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3.gif
[Thu Sep 22 04:29:32 2011] ../../acisf08017/products/events/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3_src.evt and ../../acisf08017/products/events/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Sep 22 04:29:32 2011] Size of ../../acisf08017/products/events/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3_src.evt.gz[events] = 131 counts
[Thu Sep 22 04:29:32 2011] Mean chipx,y = (837.18, 112.59)
[Thu Sep 22 04:29:32 2011] Mean tdetx,y = (3173.59, 4294.82)
[Thu Sep 22 04:29:32 2011] chipx,y range = (812.00-863.00, 85.00-140.00)
[Thu Sep 22 04:29:32 2011] Size of ../../acisf08017/products/events/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 107 counts
[Thu Sep 22 04:29:32 2011] ../../acisf08017/products/images/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3_src.img and ../../acisf08017/products/images/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Sep 22 04:29:32 2011] ../../acisf08017/products/spectra/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3_src.pi and ../../acisf08017/products/spectra/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Sep 22 04:29:32 2011] Not generating rmf since there are only 79 counts
[Thu Sep 22 04:29:35 2011] ../../acisf08017/products/lightcurves/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3_src.lc and ../../acisf08017/products/lightcurves/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Sep 22 04:30:36 2011] 173.087
[Thu Sep 22 04:34:31 2011] Updating aperture counts using extracted products
[Thu Sep 22 04:34:31 2011] Error reading totcts from fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Sep 22 04:34:31 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 04:34:31 2011] Using photon index=1.80, rate=0.00169, arf fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src3.arf
[Thu Sep 22 04:34:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 04:34:31 2011] Updating source flux to 2.3e-14
[Thu Sep 22 04:34:36 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting