[Thu Sep 22 04:25:51 2011] Detection parameters:
  Position = (882.8, 541.3) = 10 0 16.25 1 51 4.7
  Extent = 2.7" x 2.4", rotation angle = 23 degrees
  Source counts = 126.5 +/- 12.2
  Background counts = 23.5
  Rate = 0.003 +/- 0.0003

[Thu Sep 22 04:25:53 2011] Off-axis axis estimate = 8.82'
[Thu Sep 22 04:27:38 2011] Using EEF radius (= 3.44 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 04:27:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 04:27:38 2011] Initial guess for spatial extent in simple fitting = 3.44"
[Thu Sep 22 04:27:38 2011] source mask rpix=7.0, npix_max = 223, mask sum = 225, frac = 1.005
[Thu Sep 22 04:27:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.44"
[Thu Sep 22 04:27:39 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 04:27:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08017_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 04:27:39 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 04:27:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08017_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 04:27:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf08017_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf08017_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 04:27:39 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 04:27:39 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 04:27:39 2011] Fit fullrun_ccd0_acisf08017_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 04:27:57 2011] Spatial fit model total counts = 173.871000, observed total counts = 173.000000
[Thu Sep 22 04:27:57 2011] Offset between fit and detection position for source 1 = 0.408576 pixels
[Thu Sep 22 04:27:57 2011] 173.249000 total counts/ 33.879000 bgd. counts: snr = 23.944403
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.408576 pixels
  Position = (883.0, 541.7) = 10 0 16.26 1 51 4.6
  Extent = 3.3 (2.9-3.8)", rotation angle = 0
  Source counts = 139.4 +/- 13.2
  Background counts = 33.9
  Rate = 0.003 +/- 0.0003
[Thu Sep 22 04:27:57 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 04:27:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 04:27:57 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 04:27:57 2011] Source does appear to be extended
[Thu Sep 22 04:27:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 04:28:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 04:28:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 04:28:34 2011] Initial guess for spatial extent in simple fitting = 3.33"
[Thu Sep 22 04:28:34 2011] source mask rpix=6.8, npix_max = 211, mask sum = 210, frac = 0.992
[Thu Sep 22 04:28:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.33"
[Thu Sep 22 04:28:35 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 04:28:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08017_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 04:28:35 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 04:28:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf08017_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 04:28:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf08017_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf08017_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 04:28:35 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 04:28:36 2011] fullrun_ccd0_acisf08017_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 04:28:36 2011] Fit fullrun_ccd0_acisf08017_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 04:28:50 2011] Spatial fit model total counts = 170.701000, observed total counts = 170.000000
[Thu Sep 22 04:28:50 2011] Offset between fit and detection position for source 1 = 0.026233 pixels
[Thu Sep 22 04:28:50 2011] 170.174600 total counts/ 29.588600 bgd. counts: snr = 25.845198
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.026233 pixels
  Position = (883.0, 541.6) = 10 0 16.26 1 51 4.6
  Extent = 3.4 (2.9-3.8)", rotation angle = 0
  Source counts = 140.6 +/- 13.0
  Background counts = 29.6
  Rate = 0.003 +/- 0.0003
[Thu Sep 22 04:28:50 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 04:28:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 04:28:50 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 04:28:50 2011] Source does appear to be extended
[Thu Sep 22 04:28:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 04:29:23 2011] Not overwriting source region fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_src.reg
[Thu Sep 22 04:29:23 2011] Extracting stamp from image fullrun_ccd0_acisf08017_pi14-548_cl_sm2.00.img.gz, (729, 388) - (1037, 695)
[Thu Sep 22 04:29:23 2011] Writing fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1.gif
[Thu Sep 22 04:29:25 2011] ../../acisf08017/products/events/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_src.evt and ../../acisf08017/products/events/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Sep 22 04:29:25 2011] Size of ../../acisf08017/products/events/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_src.evt.gz[events] = 164 counts
[Thu Sep 22 04:29:25 2011] Mean chipx,y = (286.66, 360.48)
[Thu Sep 22 04:29:25 2011] Mean tdetx,y = (3421.48, 4845.34)
[Thu Sep 22 04:29:25 2011] chipx,y range = (262.00-323.00, 323.00-389.00)
[Thu Sep 22 04:29:25 2011] Size of ../../acisf08017/products/events/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 366 counts
[Thu Sep 22 04:29:25 2011] ../../acisf08017/products/images/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_src.img and ../../acisf08017/products/images/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Sep 22 04:29:25 2011] ../../acisf08017/products/spectra/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_src.pi and ../../acisf08017/products/spectra/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Sep 22 04:29:28 2011] ../../acisf08017/products/lightcurves/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_src.lc and ../../acisf08017/products/lightcurves/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Sep 22 04:30:36 2011] Keeping rmf generated by specextract
[Thu Sep 22 04:30:36 2011] 168.346
[Thu Sep 22 04:34:31 2011] Updating aperture counts using extracted products
[Thu Sep 22 04:34:31 2011] Error reading totcts from fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Sep 22 04:34:31 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 04:34:31 2011] Using photon index=1.80, rate=0.00301, arf fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 04:34:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 04:34:31 2011] Updating source flux to 4.2e-14
[Thu Sep 22 04:34:40 2011] Reading fit data from acisf08017/analysis//spectral/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_pl.csv
[Thu Sep 22 04:34:40 2011] Spectral fit parameter nH value = 6.51289e+20
[Thu Sep 22 04:34:40 2011] Spectral fit parameter PhoIndex value = 2.26955
[Thu Sep 22 04:34:40 2011] Failed to get F(0.3-8.0) from acisf08017/analysis//spectral/fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 04:34:40 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 04:34:40 2011] Using Nh = 6.5e+20, photon index=2.27, rate=0.00301, arf fullrun_ccd0_acisf08017_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 04:34:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 04:34:40 2011] Updating source flux to 3.7e-14