[Thu Sep 22 11:23:09 2011] Detection parameters:
  Position = (133.1, 830.2) = 9 58 57.35 2 13 14.4
  Extent = 0.5" x 0.5", rotation angle = 36 degrees
  Source counts = 1003.4 +/- 31.7
  Background counts = 4.6
  Rate = 0.02 +/- 0.0007

[Thu Sep 22 11:23:11 2011] Off-axis axis estimate = 0.88'
[Thu Sep 22 11:24:48 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:24:48 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Sep 22 11:24:48 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.616
[Thu Sep 22 11:24:48 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Thu Sep 22 11:24:49 2011] fullrun_ccd3_acisf08015_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 11:24:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08015_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 11:24:49 2011] fullrun_ccd3_acisf08015_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 11:24:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08015_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 11:24:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08015_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08015_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:24:50 2011] fullrun_ccd3_acisf08015_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 11:24:50 2011] fullrun_ccd3_acisf08015_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 11:24:50 2011] Fit fullrun_ccd3_acisf08015_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 11:25:16 2011] Spatial fit model total counts = 1014.000000, observed total counts = 1014.000000
[Thu Sep 22 11:25:16 2011] Offset between fit and detection position for source 2 = 0.704215 pixels
[Thu Sep 22 11:25:16 2011] 1014.833500 total counts/ 24.181500 bgd. counts: snr = 201.455673
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.704215 pixels
  Position = (133.6, 830.7) = 9 58 57.35 2 13 14.4
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 990.7 +/- 31.9
  Background counts = 24.2
  Rate = 0.02 +/- 0.0007
[Thu Sep 22 11:25:16 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:25:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:25:16 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:25:16 2011] Source does appear to be extended
[Thu Sep 22 11:25:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:25:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:25:56 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Thu Sep 22 11:25:56 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.199
[Thu Sep 22 11:25:56 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.43"
[Thu Sep 22 11:25:56 2011] fullrun_ccd3_acisf08015_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 11:25:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08015_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 11:25:56 2011] fullrun_ccd3_acisf08015_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 11:25:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08015_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 11:25:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08015_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08015_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:25:56 2011] fullrun_ccd3_acisf08015_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 11:25:56 2011] fullrun_ccd3_acisf08015_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 11:25:56 2011] Fit fullrun_ccd3_acisf08015_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 11:26:17 2011] Spatial fit model total counts = 1013.000000, observed total counts = 1013.000000
[Thu Sep 22 11:26:17 2011] Offset between fit and detection position for source 2 = 0.001177 pixels
[Thu Sep 22 11:26:17 2011] 1012.915000 total counts/ 21.751000 bgd. counts: snr = 212.522984
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001177 pixels
  Position = (133.6, 830.7) = 9 58 57.35 2 13 14.4
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 991.2 +/- 31.8
  Background counts = 21.8
  Rate = 0.02 +/- 0.0007
[Thu Sep 22 11:26:17 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:26:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:26:17 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:26:17 2011] Source does appear to be extended
[Thu Sep 22 11:26:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:31:48 2011] Not overwriting source region fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_src.reg
[Thu Sep 22 11:31:48 2011] Extracting stamp from image fullrun_ccd3_acisf08015_pi14-548_cl_sm2.00.img.gz, (114, 811) - (153, 850)
[Thu Sep 22 11:31:48 2011] Writing fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2.gif
[Thu Sep 22 11:31:51 2011] ../../acisf08015/products/events/fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_src.evt and ../../acisf08015/products/events/fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Sep 22 11:31:51 2011] Size of ../../acisf08015/products/events/fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_src.evt.gz[events] = 995 counts
[Thu Sep 22 11:31:51 2011] Mean chipx,y = (931.21, 918.80)
[Thu Sep 22 11:31:51 2011] Mean tdetx,y = (4213.20, 3992.21)
[Thu Sep 22 11:31:51 2011] chipx,y range = (914.00-950.00, 901.00-938.00)
[Thu Sep 22 11:31:51 2011] Size of ../../acisf08015/products/events/fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 31 counts
[Thu Sep 22 11:31:51 2011] ../../acisf08015/products/images/fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_src.img and ../../acisf08015/products/images/fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Sep 22 11:31:51 2011] ../../acisf08015/products/spectra/fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_src.pi and ../../acisf08015/products/spectra/fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Sep 22 11:31:57 2011] ../../acisf08015/products/lightcurves/fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_src.lc and ../../acisf08015/products/lightcurves/fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Sep 22 11:33:27 2011] Keeping rmf generated by specextract
[Thu Sep 22 11:33:27 2011] 202.74
[Thu Sep 22 11:34:00 2011] Updating aperture counts using extracted products
[Thu Sep 22 11:34:00 2011] Error reading totcts from fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Sep 22 11:34:01 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:34:01 2011] Using photon index=1.80, rate=0.0218, arf fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2.arf
[Thu Sep 22 11:34:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:34:01 2011] Updating source flux to 2.5e-13
[Thu Sep 22 11:34:38 2011] Reading fit data from acisf08015/analysis//spectral/fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_pl.csv
[Thu Sep 22 11:34:38 2011] Spectral fit parameter nH value = 1.27241e+20
[Thu Sep 22 11:34:38 2011] Spectral fit parameter PhoIndex value = 1.75109
[Thu Sep 22 11:34:38 2011] Failed to get F(0.3-8.0) from acisf08015/analysis//spectral/fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 11:34:38 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:34:38 2011] Using Nh = 1.3e+20, photon index=1.75, rate=0.0218, arf fullrun_ccd3_acisf08015_pi14-548_pass1_cl_src2.arf
[Thu Sep 22 11:34:38 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:34:38 2011] Updating source flux to 2.5e-13