[Thu Sep 22 11:23:06 2011] Detection parameters:
  Position = (423.5, 209.5) = 9 59 5.12 2 15 29.9
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 156.1 +/- 12.6
  Background counts = 2.9
  Rate = 0.003 +/- 0.0003

[Thu Sep 22 11:23:08 2011] Off-axis axis estimate = 2.10'
[Thu Sep 22 11:24:45 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:24:45 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Thu Sep 22 11:24:45 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.772
[Thu Sep 22 11:24:45 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.44"
[Thu Sep 22 11:24:47 2011] fullrun_ccd2_acisf08015_pi14-548_cl_pass0_src4.ximg exists
[Thu Sep 22 11:24:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08015_pi14-548_cl_pass0_src4.csv
[Thu Sep 22 11:24:47 2011] fullrun_ccd2_acisf08015_pi14-548_cl_pass0_src4_1.ximg exists
[Thu Sep 22 11:24:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08015_pi14-548_cl_pass0_src4.csv
[Thu Sep 22 11:24:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08015_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08015_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:24:48 2011] fullrun_ccd2_acisf08015_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Thu Sep 22 11:24:48 2011] fullrun_ccd2_acisf08015_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Sep 22 11:24:48 2011] Fit fullrun_ccd2_acisf08015_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Sep 22 11:25:14 2011] Spatial fit model total counts = 189.763000, observed total counts = 182.000000
[Thu Sep 22 11:25:14 2011] Offset between fit and detection position for source 3 = 0.688127 pixels
[Thu Sep 22 11:25:14 2011] 189.611200 total counts/ 13.251200 bgd. counts: snr = 48.447624
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.688127 pixels
  Position = (423.7, 210.2) = 9 59 5.13 2 15 30.0
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 176.4 +/- 13.8
  Background counts = 13.3
  Rate = 0.004 +/- 0.0003
[Thu Sep 22 11:25:14 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:25:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:25:14 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:25:14 2011] Source does appear to be extended
[Thu Sep 22 11:25:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:25:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:25:53 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Thu Sep 22 11:25:53 2011] source mask rpix=1.1, npix_max = 10, mask sum = 6, frac = 0.593
[Thu Sep 22 11:25:53 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.54"
[Thu Sep 22 11:25:53 2011] fullrun_ccd2_acisf08015_pi14-548_cl_pass1_src4.ximg exists
[Thu Sep 22 11:25:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08015_pi14-548_cl_pass1_src4.csv
[Thu Sep 22 11:25:53 2011] fullrun_ccd2_acisf08015_pi14-548_cl_pass1_src4_1.ximg exists
[Thu Sep 22 11:25:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08015_pi14-548_cl_pass1_src4.csv
[Thu Sep 22 11:25:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08015_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08015_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:25:54 2011] fullrun_ccd2_acisf08015_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Thu Sep 22 11:25:54 2011] fullrun_ccd2_acisf08015_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Sep 22 11:25:54 2011] Fit fullrun_ccd2_acisf08015_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Sep 22 11:26:14 2011] Spatial fit model total counts = 189.683000, observed total counts = 182.000000
[Thu Sep 22 11:26:14 2011] Offset between fit and detection position for source 3 = 0.005949 pixels
[Thu Sep 22 11:26:14 2011] 188.804300 total counts/ 12.593300 bgd. counts: snr = 49.655029
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.005949 pixels
  Position = (423.7, 210.2) = 9 59 5.13 2 15 30.0
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 176.2 +/- 13.7
  Background counts = 12.6
  Rate = 0.004 +/- 0.0003
[Thu Sep 22 11:26:14 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:26:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:26:14 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:26:14 2011] Source does appear to be extended
[Thu Sep 22 11:26:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:29:39 2011] Not overwriting source region fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3_src.reg
[Thu Sep 22 11:29:39 2011] Extracting stamp from image fullrun_ccd2_acisf08015_pi14-548_cl_sm2.00.img.gz, (399, 186) - (448, 235)
[Thu Sep 22 11:29:39 2011] Writing fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3.gif
[Thu Sep 22 11:29:52 2011] ../../acisf08015/products/events/fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3_src.evt and ../../acisf08015/products/events/fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Sep 22 11:29:52 2011] Size of ../../acisf08015/products/events/fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3_src.evt.gz[events] = 172 counts
[Thu Sep 22 11:29:52 2011] Mean chipx,y = (25.85, 794.87)
[Thu Sep 22 11:29:52 2011] Mean tdetx,y = (3855.87, 4060.15)
[Thu Sep 22 11:29:52 2011] chipx,y range = (7.00-43.00, 775.00-813.00)
[Thu Sep 22 11:29:52 2011] Size of ../../acisf08015/products/events/fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 15 counts
[Thu Sep 22 11:29:52 2011] ../../acisf08015/products/images/fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3_src.img and ../../acisf08015/products/images/fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Sep 22 11:29:52 2011] ../../acisf08015/products/spectra/fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3_src.pi and ../../acisf08015/products/spectra/fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Sep 22 11:29:55 2011] ../../acisf08015/products/lightcurves/fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3_src.lc and ../../acisf08015/products/lightcurves/fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Sep 22 11:31:41 2011] Keeping rmf generated by specextract
[Thu Sep 22 11:31:41 2011] 195.227
[Thu Sep 22 11:34:00 2011] Updating aperture counts using extracted products
[Thu Sep 22 11:34:00 2011] Error reading totcts from fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Sep 22 11:34:00 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:34:00 2011] Using photon index=1.80, rate=0.00387, arf fullrun_ccd2_acisf08015_pi14-548_pass1_cl_src3.arf
[Thu Sep 22 11:34:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:34:00 2011] Updating source flux to 4.5e-14