[Thu Sep 22 11:23:01 2011] Detection parameters:
  Position = (1056.6, 1064.9) = 9 58 56.68 2 10 47.7
  Extent = 0.5" x 0.5", rotation angle = 42 degrees
  Source counts = 10.4 +/- 3.3
  Background counts = 0.6
  Rate = 0.0002 +/- 7e-05

[Thu Sep 22 11:23:05 2011] Off-axis axis estimate = 3.19'
[Thu Sep 22 11:24:42 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:24:42 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Thu Sep 22 11:24:42 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.968
[Thu Sep 22 11:24:42 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.62"
[Thu Sep 22 11:24:44 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass0_src15.ximg exists
[Thu Sep 22 11:24:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08015_pi14-548_cl_pass0_src15.csv
[Thu Sep 22 11:24:44 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass0_src15_1.ximg exists
[Thu Sep 22 11:24:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08015_pi14-548_cl_pass0_src15.csv
[Thu Sep 22 11:24:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08015_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08015_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:24:45 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Thu Sep 22 11:24:45 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Sep 22 11:24:45 2011] Fit fullrun_ccd1_acisf08015_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Thu Sep 22 11:25:10 2011] Spatial fit model total counts = 12.743600, observed total counts = 13.000000
[Thu Sep 22 11:25:10 2011] Offset between fit and detection position for source 3 = 0.707336 pixels
[Thu Sep 22 11:25:10 2011] 12.842260 total counts/ 2.035060 bgd. counts: snr = 7.575732
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.707336 pixels
  Position = (1057.1, 1065.4) = 9 58 56.68 2 10 47.7
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 10.8 +/- 3.6
  Background counts = 2.0
  Rate = 0.0002 +/- 8e-05
[Thu Sep 22 11:25:10 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:25:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:25:10 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:25:10 2011] Source does appear to be extended
[Thu Sep 22 11:25:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:25:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:25:49 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Thu Sep 22 11:25:49 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.912
[Thu Sep 22 11:25:49 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.39"
[Thu Sep 22 11:25:52 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass1_src15.ximg exists
[Thu Sep 22 11:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08015_pi14-548_cl_pass1_src15.csv
[Thu Sep 22 11:25:52 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass1_src15_1.ximg exists
[Thu Sep 22 11:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08015_pi14-548_cl_pass1_src15.csv
[Thu Sep 22 11:25:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08015_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08015_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:25:53 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Thu Sep 22 11:25:53 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Sep 22 11:25:53 2011] Fit fullrun_ccd1_acisf08015_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Sep 22 11:26:10 2011] Spatial fit model total counts = 12.817600, observed total counts = 13.000000
[Thu Sep 22 11:26:10 2011] Offset between fit and detection position for source 3 = 0.006401 pixels
[Thu Sep 22 11:26:10 2011] 12.847880 total counts/ 1.947080 bgd. counts: snr = 7.812076
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.006401 pixels
  Position = (1057.1, 1065.4) = 9 58 56.68 2 10 47.7
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 10.9 +/- 3.6
  Background counts = 1.9
  Rate = 0.0002 +/- 8e-05
[Thu Sep 22 11:26:10 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:26:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:26:10 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:26:10 2011] Source does appear to be extended
[Thu Sep 22 11:26:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:28:19 2011] Not overwriting source region fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3_src.reg
[Thu Sep 22 11:28:19 2011] Extracting stamp from image fullrun_ccd1_acisf08015_pi14-548_cl_sm2.00.img.gz, (1039, 1047) - (1075, 1083)
[Thu Sep 22 11:28:20 2011] Writing fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3.gif
[Thu Sep 22 11:29:18 2011] ../../acisf08015/products/events/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3_src.evt and ../../acisf08015/products/events/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Sep 22 11:29:18 2011] Size of ../../acisf08015/products/events/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3_src.evt.gz[events] = 11 counts
[Thu Sep 22 11:29:18 2011] Mean chipx,y = (20.45, 646.64)
[Thu Sep 22 11:29:18 2011] Mean tdetx,y = (4485.36, 4127.45)
[Thu Sep 22 11:29:18 2011] chipx,y range = (3.00-31.00, 632.00-667.00)
[Thu Sep 22 11:29:18 2011] Size of ../../acisf08015/products/events/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 4 counts
[Thu Sep 22 11:29:18 2011] ../../acisf08015/products/images/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3_src.img and ../../acisf08015/products/images/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Sep 22 11:29:18 2011] ../../acisf08015/products/spectra/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3_src.pi and ../../acisf08015/products/spectra/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Sep 22 11:29:18 2011] Not generating rmf since there are only 10 counts
[Thu Sep 22 11:29:21 2011] ../../acisf08015/products/lightcurves/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3_src.lc and ../../acisf08015/products/lightcurves/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Sep 22 11:29:39 2011] 158.337
[Thu Sep 22 11:33:59 2011] Updating aperture counts using extracted products
[Thu Sep 22 11:33:59 2011] Error reading totcts from fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Sep 22 11:34:00 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:34:00 2011] Using photon index=1.80, rate=0.00024, arf fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src3.arf
[Thu Sep 22 11:34:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:34:00 2011] Updating source flux to 3.5e-15
[Thu Sep 22 11:34:12 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting