[Thu Sep 22 11:23:02 2011] Detection parameters:
  Position = (722.4, 766.3) = 9 59 7.65 2 8 20.8
  Extent = 1.1" x 0.8", rotation angle = 43 degrees
  Source counts = 180.4 +/- 13.6
  Background counts = 5.6
  Rate = 0.004 +/- 0.0003

[Thu Sep 22 11:23:05 2011] Off-axis axis estimate = 5.89'
[Thu Sep 22 11:24:42 2011] Using EEF radius (= 1.58 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:24:42 2011] Initial guess for spatial extent in simple fitting = 1.58"
[Thu Sep 22 11:24:42 2011] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.892
[Thu Sep 22 11:24:42 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.58"
[Thu Sep 22 11:24:42 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass0_src2.ximg exists
[Thu Sep 22 11:24:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08015_pi14-548_cl_pass0_src2.csv
[Thu Sep 22 11:24:42 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass0_src2_1.ximg exists
[Thu Sep 22 11:24:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08015_pi14-548_cl_pass0_src2.csv
[Thu Sep 22 11:24:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08015_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08015_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:24:44 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu Sep 22 11:24:44 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Sep 22 11:24:44 2011] Fit fullrun_ccd1_acisf08015_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Sep 22 11:25:10 2011] Spatial fit model total counts = 187.000000, observed total counts = 187.000000
[Thu Sep 22 11:25:10 2011] Offset between fit and detection position for source 15 = 0.686808 pixels
[Thu Sep 22 11:25:10 2011] 187.110600 total counts/ 13.048600 bgd. counts: snr = 48.186126
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.686808 pixels
  Position = (722.9, 766.7) = 9 59 7.65 2 8 20.7
  Extent = 1.2 (1.0-1.3)", rotation angle = 0
  Source counts = 174.1 +/- 13.7
  Background counts = 13.0
  Rate = 0.004 +/- 0.0003
[Thu Sep 22 11:25:10 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:25:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:25:10 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:25:10 2011] Source does appear to be extended
[Thu Sep 22 11:25:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:25:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 11:25:49 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Thu Sep 22 11:25:49 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.081
[Thu Sep 22 11:25:49 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.17"
[Thu Sep 22 11:25:52 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass1_src2.ximg exists
[Thu Sep 22 11:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08015_pi14-548_cl_pass1_src2.csv
[Thu Sep 22 11:25:52 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass1_src2_1.ximg exists
[Thu Sep 22 11:25:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf08015_pi14-548_cl_pass1_src2.csv
[Thu Sep 22 11:25:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf08015_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf08015_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 11:25:52 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu Sep 22 11:25:52 2011] fullrun_ccd1_acisf08015_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Sep 22 11:25:52 2011] Fit fullrun_ccd1_acisf08015_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Sep 22 11:26:10 2011] Spatial fit model total counts = 186.000000, observed total counts = 186.000000
[Thu Sep 22 11:26:10 2011] Offset between fit and detection position for source 15 = 0.033718 pixels
[Thu Sep 22 11:26:10 2011] 186.346400 total counts/ 28.362400 bgd. counts: snr = 29.664813
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.033718 pixels
  Position = (722.9, 766.7) = 9 59 7.65 2 8 20.7
  Extent = 1.1 (0.9-1.2)", rotation angle = 0
  Source counts = 158.0 +/- 13.7
  Background counts = 28.4
  Rate = 0.003 +/- 0.0003
[Thu Sep 22 11:26:10 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 11:26:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 11:26:10 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 11:26:10 2011] Source does appear to be extended
[Thu Sep 22 11:26:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 11:28:19 2011] Not overwriting source region fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15_src.reg
[Thu Sep 22 11:28:19 2011] Extracting stamp from image fullrun_ccd1_acisf08015_pi14-548_cl_sm2.00.img.gz, (675, 718) - (771, 815)
[Thu Sep 22 11:28:19 2011] Writing fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15.gif
[Thu Sep 22 11:28:24 2011] ../../acisf08015/products/events/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15_src.evt and ../../acisf08015/products/events/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Thu Sep 22 11:28:24 2011] Size of ../../acisf08015/products/events/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15_src.evt.gz[events] = 182 counts
[Thu Sep 22 11:28:24 2011] Mean chipx,y = (454.31, 556.97)
[Thu Sep 22 11:28:24 2011] Mean tdetx,y = (4575.03, 4561.31)
[Thu Sep 22 11:28:24 2011] chipx,y range = (433.00-475.00, 535.00-576.00)
[Thu Sep 22 11:28:24 2011] Size of ../../acisf08015/products/events/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 45 counts
[Thu Sep 22 11:28:24 2011] ../../acisf08015/products/images/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15_src.img and ../../acisf08015/products/images/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Thu Sep 22 11:28:24 2011] ../../acisf08015/products/spectra/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15_src.pi and ../../acisf08015/products/spectra/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Thu Sep 22 11:28:27 2011] ../../acisf08015/products/lightcurves/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15_src.lc and ../../acisf08015/products/lightcurves/fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Thu Sep 22 11:29:38 2011] Keeping rmf generated by specextract
[Thu Sep 22 11:29:39 2011] 188.348
[Thu Sep 22 11:33:59 2011] Updating aperture counts using extracted products
[Thu Sep 22 11:33:59 2011] Error reading totcts from fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15_src.pi.gz
[Thu Sep 22 11:34:00 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 11:34:00 2011] Using photon index=1.80, rate=0.00347, arf fullrun_ccd1_acisf08015_pi14-548_pass1_cl_src15.arf
[Thu Sep 22 11:34:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 11:34:00 2011] Updating source flux to 4.3e-14