[Thu Oct 27 06:08:20 2011] Detection parameters:
  Position = (837.5, 672.8) = 9 59 34.43 2 6 27.2
  Extent = 1.9" x 1.2", rotation angle = 94 degrees
  Source counts = 150.4 +/- 12.7
  Background counts = 10.6
  Rate = 0.003 +/- 0.0003

[Thu Oct 27 06:08:21 2011] Off-axis axis estimate = 6.65'
[Thu Oct 27 06:09:30 2011] Using EEF radius (= 1.98 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 06:09:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 06:09:30 2011] Initial guess for spatial extent in simple fitting = 1.98"
[Thu Oct 27 06:09:30 2011] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.992
[Thu Oct 27 06:09:30 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.98"
[Thu Oct 27 06:09:31 2011] fullrun_ccd3_acisf08013_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 27 06:09:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08013_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 06:09:31 2011] fullrun_ccd3_acisf08013_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 27 06:09:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08013_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 06:09:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08013_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08013_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 06:09:31 2011] fullrun_ccd3_acisf08013_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 27 06:09:31 2011] fullrun_ccd3_acisf08013_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 27 06:09:31 2011] Fit fullrun_ccd3_acisf08013_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 27 06:09:45 2011] Spatial fit model total counts = 164.989000, observed total counts = 165.000000
[Thu Oct 27 06:09:45 2011] Offset between fit and detection position for source 11 = 0.469171 pixels
[Thu Oct 27 06:09:45 2011] 165.333700 total counts/ 30.657700 bgd. counts: snr = 24.323184
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.469171 pixels
  Position = (837.8, 673.2) = 9 59 34.43 2 6 27.2
  Extent = 1.6 (1.3-1.8)", rotation angle = 0
  Source counts = 134.7 +/- 12.9
  Background counts = 30.7
  Rate = 0.003 +/- 0.0003
[Thu Oct 27 06:09:45 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 06:09:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 06:09:45 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 06:09:45 2011] Source does appear to be extended
[Thu Oct 27 06:09:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 06:10:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 06:10:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 06:10:11 2011] Initial guess for spatial extent in simple fitting = 1.56"
[Thu Oct 27 06:10:11 2011] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.909
[Thu Oct 27 06:10:11 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.56"
[Thu Oct 27 06:10:12 2011] fullrun_ccd3_acisf08013_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 27 06:10:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08013_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 06:10:12 2011] fullrun_ccd3_acisf08013_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 27 06:10:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08013_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 06:10:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08013_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08013_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 06:10:13 2011] fullrun_ccd3_acisf08013_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 27 06:10:13 2011] fullrun_ccd3_acisf08013_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 27 06:10:13 2011] Fit fullrun_ccd3_acisf08013_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 27 06:10:25 2011] Spatial fit model total counts = 158.985000, observed total counts = 159.000000
[Thu Oct 27 06:10:25 2011] Offset between fit and detection position for source 11 = 0.273006 pixels
[Thu Oct 27 06:10:25 2011] 160.382500 total counts/ 45.361500 bgd. counts: snr = 17.077859
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.273006 pixels
  Position = (837.8, 672.9) = 9 59 34.43 2 6 27.0
  Extent = 1.3 (1.0-1.6)", rotation angle = 0
  Source counts = 115.0 +/- 12.7
  Background counts = 45.4
  Rate = 0.002 +/- 0.0003
[Thu Oct 27 06:10:25 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 06:10:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 06:10:25 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 06:10:25 2011] Source does appear to be extended
[Thu Oct 27 06:10:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 06:13:41 2011] Not overwriting source region fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_src.reg
[Thu Oct 27 06:13:41 2011] Extracting stamp from image fullrun_ccd3_acisf08013_pi14-548_cl_sm2.00.img.gz, (779, 614) - (897, 732)
[Thu Oct 27 06:13:41 2011] Writing fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11.gif
[Thu Oct 27 06:13:43 2011] ../../acisf08013/products/events/fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_src.evt and ../../acisf08013/products/events/fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Thu Oct 27 06:13:43 2011] Size of ../../acisf08013/products/events/fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_src.evt.gz[events] = 148 counts
[Thu Oct 27 06:13:43 2011] Mean chipx,y = (390.09, 439.66)
[Thu Oct 27 06:13:43 2011] Mean tdetx,y = (4692.34, 3451.09)
[Thu Oct 27 06:13:43 2011] chipx,y range = (367.00-414.00, 418.00-459.00)
[Thu Oct 27 06:13:43 2011] Size of ../../acisf08013/products/events/fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 47 counts
[Thu Oct 27 06:13:43 2011] ../../acisf08013/products/images/fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_src.img and ../../acisf08013/products/images/fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Thu Oct 27 06:13:43 2011] ../../acisf08013/products/spectra/fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_src.pi and ../../acisf08013/products/spectra/fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Thu Oct 27 06:13:45 2011] ../../acisf08013/products/lightcurves/fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_src.lc and ../../acisf08013/products/lightcurves/fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Thu Oct 27 06:14:41 2011] Keeping rmf generated by specextract
[Thu Oct 27 06:14:41 2011] 177.046
[Thu Oct 27 06:15:06 2011] Updating aperture counts using extracted products
[Thu Oct 27 06:15:06 2011] Error reading totcts from fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_src.pi.gz
[Thu Oct 27 06:15:06 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 06:15:06 2011] Using photon index=1.80, rate=0.00239, arf fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11.arf
[Thu Oct 27 06:15:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 06:15:06 2011] Updating source flux to 3.2e-14
[Thu Oct 27 06:15:27 2011] Reading fit data from acisf08013/analysis//spectral/fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_pl.csv
[Thu Oct 27 06:15:27 2011] Spectral fit parameter nH value = 2.04982e+21
[Thu Oct 27 06:15:27 2011] Spectral fit parameter PhoIndex value = 1.97455
[Thu Oct 27 06:15:27 2011] Failed to get F(0.3-8.0) from acisf08013/analysis//spectral/fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11_pl.csv, possibly due to different flux energy range selected
[Thu Oct 27 06:15:27 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 06:15:27 2011] Using Nh = 2e+21, photon index=1.97, rate=0.00239, arf fullrun_ccd3_acisf08013_pi14-548_pass1_cl_src11.arf
[Thu Oct 27 06:15:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 06:15:27 2011] Updating source flux to 2.8e-14