[Wed Sep 21 09:48:10 2011] Detection parameters:
  Position = (440.0, 258.8) = 10 0 17.51 2 0 12.6
  Extent = 1.7" x 0.9", rotation angle = 65 degrees
  Source counts = 137.1 +/- 12.1
  Background counts = 8.9
  Rate = 0.003 +/- 0.0002

[Wed Sep 21 09:48:12 2011] Off-axis axis estimate = 6.30'
[Wed Sep 21 09:50:04 2011] Using EEF radius (= 1.79 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 09:50:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 09:50:04 2011] Initial guess for spatial extent in simple fitting = 1.79"
[Wed Sep 21 09:50:04 2011] source mask rpix=3.6, npix_max = 68, mask sum = 64, frac = 0.938
[Wed Sep 21 09:50:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.79"
[Wed Sep 21 09:50:05 2011] fullrun_ccd3_acisf08012_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 09:50:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08012_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 09:50:05 2011] fullrun_ccd3_acisf08012_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 09:50:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08012_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 09:50:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08012_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08012_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 09:50:11 2011] fullrun_ccd3_acisf08012_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 09:50:11 2011] fullrun_ccd3_acisf08012_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 09:50:11 2011] Fit fullrun_ccd3_acisf08012_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 09:50:35 2011] Spatial fit model total counts = 150.996000, observed total counts = 151.000000
[Wed Sep 21 09:50:35 2011] Offset between fit and detection position for source 30 = 0.649503 pixels
[Wed Sep 21 09:50:35 2011] 151.256500 total counts/ 20.659500 bgd. counts: snr = 28.732492
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.649503 pixels
  Position = (440.3, 259.4) = 10 0 17.51 2 0 12.7
  Extent = 1.5 (1.3-1.7)", rotation angle = 0
  Source counts = 130.6 +/- 12.3
  Background counts = 20.7
  Rate = 0.003 +/- 0.0002
[Wed Sep 21 09:50:35 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 09:50:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 09:50:35 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 09:50:35 2011] Source does appear to be extended
[Wed Sep 21 09:50:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 09:51:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 09:51:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 09:51:15 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Wed Sep 21 09:51:15 2011] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.971
[Wed Sep 21 09:51:15 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50"
[Wed Sep 21 09:51:15 2011] fullrun_ccd3_acisf08012_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 09:51:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08012_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 09:51:15 2011] fullrun_ccd3_acisf08012_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 09:51:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08012_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 09:51:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08012_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08012_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 09:51:16 2011] fullrun_ccd3_acisf08012_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 09:51:16 2011] fullrun_ccd3_acisf08012_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 09:51:16 2011] Fit fullrun_ccd3_acisf08012_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 09:51:43 2011] Spatial fit model total counts = 143.860000, observed total counts = 145.000000
[Wed Sep 21 09:51:43 2011] Offset between fit and detection position for source 30 = 0.078870 pixels
[Wed Sep 21 09:51:43 2011] 144.361900 total counts/ 14.627900 bgd. counts: snr = 33.920545
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.078870 pixels
  Position = (440.3, 259.4) = 10 0 17.51 2 0 12.7
  Extent = 1.5 (1.3-1.8)", rotation angle = 0
  Source counts = 129.7 +/- 12.0
  Background counts = 14.6
  Rate = 0.003 +/- 0.0002
[Wed Sep 21 09:51:43 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 09:51:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 09:51:43 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 09:51:43 2011] Source does appear to be extended
[Wed Sep 21 09:51:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 09:56:49 2011] Not overwriting source region fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_src.reg
[Wed Sep 21 09:56:49 2011] Extracting stamp from image fullrun_ccd3_acisf08012_pi14-548_cl_sm2.00.img.gz, (372, 191) - (509, 328)
[Wed Sep 21 09:56:49 2011] Writing fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30.gif
[Wed Sep 21 09:56:59 2011] ../../acisf08012/products/events/fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_src.evt and ../../acisf08012/products/events/fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Wed Sep 21 09:56:59 2011] Size of ../../acisf08012/products/events/fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_src.evt.gz[events] = 142 counts
[Wed Sep 21 09:56:59 2011] Mean chipx,y = (943.24, 255.84)
[Wed Sep 21 09:56:59 2011] Mean tdetx,y = (4876.16, 4004.24)
[Wed Sep 21 09:56:59 2011] chipx,y range = (920.00-966.00, 233.00-278.00)
[Wed Sep 21 09:56:59 2011] Size of ../../acisf08012/products/events/fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 89 counts
[Wed Sep 21 09:56:59 2011] ../../acisf08012/products/images/fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_src.img and ../../acisf08012/products/images/fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Wed Sep 21 09:56:59 2011] ../../acisf08012/products/spectra/fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_src.pi and ../../acisf08012/products/spectra/fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Wed Sep 21 09:57:05 2011] ../../acisf08012/products/lightcurves/fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_src.lc and ../../acisf08012/products/lightcurves/fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Wed Sep 21 09:58:35 2011] Keeping rmf generated by specextract
[Wed Sep 21 09:58:35 2011] 184.108
[Wed Sep 21 09:59:03 2011] Updating aperture counts using extracted products
[Wed Sep 21 09:59:03 2011] Error reading totcts from fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_src.pi.gz
[Wed Sep 21 09:59:03 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 09:59:03 2011] Using photon index=1.80, rate=0.00262, arf fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30.arf
[Wed Sep 21 09:59:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 09:59:03 2011] Updating source flux to 3.3e-14
[Wed Sep 21 09:59:41 2011] Reading fit data from acisf08012/analysis//spectral/fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_pl.csv
[Wed Sep 21 09:59:41 2011] Spectral fit parameter nH value = 1.36099e+21
[Wed Sep 21 09:59:41 2011] Spectral fit parameter PhoIndex value = 1.98905
[Wed Sep 21 09:59:41 2011] Failed to get F(0.3-8.0) from acisf08012/analysis//spectral/fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 09:59:41 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 09:59:41 2011] Using Nh = 1.4e+21, photon index=1.99, rate=0.00262, arf fullrun_ccd3_acisf08012_pi14-548_pass1_cl_src30.arf
[Wed Sep 21 09:59:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 09:59:41 2011] Updating source flux to 3e-14