[Mon Sep 26 14:14:41 2011] Detection parameters:
  Position = (863.2, 441.1) = 10 1 9.98 2 3 53.4
  Extent = 0.5" x 0.5", rotation angle = 81 degrees
  Source counts = 11.3 +/- 3.5
  Background counts = 0.7
  Rate = 0.0002 +/- 7e-05

[Mon Sep 26 14:14:44 2011] Off-axis axis estimate = 3.12'
[Mon Sep 26 14:15:51 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 14:15:51 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Mon Sep 26 14:15:51 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.336
[Mon Sep 26 14:15:51 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.61"
[Mon Sep 26 14:15:52 2011] fullrun_ccd3_acisf08011_pi14-548_cl_pass0_src20.ximg exists
[Mon Sep 26 14:15:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08011_pi14-548_cl_pass0_src20.csv
[Mon Sep 26 14:15:52 2011] fullrun_ccd3_acisf08011_pi14-548_cl_pass0_src20_1.ximg exists
[Mon Sep 26 14:15:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08011_pi14-548_cl_pass0_src20.csv
[Mon Sep 26 14:15:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08011_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08011_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 14:15:52 2011] fullrun_ccd3_acisf08011_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Mon Sep 26 14:15:52 2011] fullrun_ccd3_acisf08011_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Sep 26 14:15:52 2011] Fit fullrun_ccd3_acisf08011_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Mon Sep 26 14:16:07 2011] Spatial fit model total counts = 13.853400, observed total counts = 14.000000
[Mon Sep 26 14:16:07 2011] Offset between fit and detection position for source 10 = 0.764375 pixels
[Mon Sep 26 14:16:07 2011] 13.983800 total counts/ 2.168700 bgd. counts: snr = 8.023016
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.764375 pixels
  Position = (863.7, 441.6) = 10 1 9.98 2 3 53.4
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 11.8 +/- 3.7
  Background counts = 2.2
  Rate = 0.0003 +/- 8e-05
[Mon Sep 26 14:16:07 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 14:16:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 14:16:07 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 14:16:07 2011] Source does appear to be extended
[Mon Sep 26 14:16:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 14:16:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 14:16:50 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Mon Sep 26 14:16:50 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.982
[Mon Sep 26 14:16:50 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.50"
[Mon Sep 26 14:16:52 2011] fullrun_ccd3_acisf08011_pi14-548_cl_pass1_src20.ximg exists
[Mon Sep 26 14:16:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08011_pi14-548_cl_pass1_src20.csv
[Mon Sep 26 14:16:52 2011] fullrun_ccd3_acisf08011_pi14-548_cl_pass1_src20_1.ximg exists
[Mon Sep 26 14:16:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08011_pi14-548_cl_pass1_src20.csv
[Mon Sep 26 14:16:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08011_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08011_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 14:16:53 2011] fullrun_ccd3_acisf08011_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Mon Sep 26 14:16:53 2011] fullrun_ccd3_acisf08011_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Mon Sep 26 14:16:53 2011] Fit fullrun_ccd3_acisf08011_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Mon Sep 26 14:17:10 2011] Spatial fit model total counts = 13.510100, observed total counts = 14.000000
[Mon Sep 26 14:17:10 2011] Offset between fit and detection position for source 10 = 0.045562 pixels
[Mon Sep 26 14:17:10 2011] 13.633870 total counts/ 1.816370 bgd. counts: snr = 8.768463
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.045562 pixels
  Position = (863.7, 441.6) = 10 1 9.98 2 3 53.4
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 11.8 +/- 3.7
  Background counts = 1.8
  Rate = 0.0003 +/- 8e-05
[Mon Sep 26 14:17:10 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 14:17:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 14:17:10 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 14:17:10 2011] Source does appear to be extended
[Mon Sep 26 14:17:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 14:21:50 2011] Not overwriting source region fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10_src.reg
[Mon Sep 26 14:21:50 2011] Extracting stamp from image fullrun_ccd3_acisf08011_pi14-548_cl_sm2.00.img.gz, (841, 419) - (886, 464)
[Mon Sep 26 14:21:50 2011] Writing fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10.gif
[Mon Sep 26 14:23:16 2011] ../../acisf08011/products/events/fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10_src.evt and ../../acisf08011/products/events/fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Sep 26 14:23:16 2011] Size of ../../acisf08011/products/events/fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10_src.evt.gz[events] = 12 counts
[Mon Sep 26 14:23:16 2011] Mean chipx,y = (697.92, 747.08)
[Mon Sep 26 14:23:16 2011] Mean tdetx,y = (4384.92, 3758.92)
[Mon Sep 26 14:23:16 2011] chipx,y range = (672.00-703.00, 732.00-751.00)
[Mon Sep 26 14:23:16 2011] Size of ../../acisf08011/products/events/fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 6 counts
[Mon Sep 26 14:23:16 2011] ../../acisf08011/products/images/fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10_src.img and ../../acisf08011/products/images/fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Sep 26 14:23:16 2011] ../../acisf08011/products/spectra/fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10_src.pi and ../../acisf08011/products/spectra/fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon Sep 26 14:23:16 2011] Not generating rmf since there are only 11 counts
[Mon Sep 26 14:23:19 2011] ../../acisf08011/products/lightcurves/fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10_src.lc and ../../acisf08011/products/lightcurves/fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Sep 26 14:24:26 2011] 194.426
[Mon Sep 26 14:24:54 2011] Updating aperture counts using extracted products
[Mon Sep 26 14:24:54 2011] Error reading totcts from fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10_src.pi.gz
[Mon Sep 26 14:24:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 14:24:55 2011] Using photon index=1.80, rate=0.000251, arf fullrun_ccd3_acisf08011_pi14-548_pass1_cl_src10.arf
[Mon Sep 26 14:24:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 14:24:55 2011] Updating source flux to 3e-15
[Mon Sep 26 14:25:23 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting