[Wed Sep 21 21:05:34 2011] Detection parameters:
  Position = (313.9, 647.8) = 9 59 2.75 2 19 6.0
  Extent = 0.5" x 0.5", rotation angle = 60 degrees
  Source counts = 1281.6 +/- 35.9
  Background counts = 5.4
  Rate = 0.03 +/- 0.0008

[Wed Sep 21 21:05:40 2011] Off-axis axis estimate = 3.05'
[Wed Sep 21 21:07:11 2011] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 21:07:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 21:07:11 2011] Initial guess for spatial extent in simple fitting = 0.59"
[Wed Sep 21 21:07:11 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.386
[Wed Sep 21 21:07:11 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.59"
[Wed Sep 21 21:07:13 2011] fullrun_ccd3_acisf08009_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 21:07:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08009_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 21:07:13 2011] fullrun_ccd3_acisf08009_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 21:07:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08009_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 21:07:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08009_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08009_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 21:07:15 2011] fullrun_ccd3_acisf08009_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 21:07:15 2011] fullrun_ccd3_acisf08009_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 21:07:15 2011] Fit fullrun_ccd3_acisf08009_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 21:07:37 2011] Spatial fit model total counts = 1291.020000, observed total counts = 1290.000000
[Wed Sep 21 21:07:37 2011] Offset between fit and detection position for source 1 = 0.735704 pixels
[Wed Sep 21 21:07:37 2011] 1289.400900 total counts/ 27.440900 bgd. counts: snr = 240.905333
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.735704 pixels
  Position = (314.4, 648.3) = 9 59 2.75 2 19 6.0
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 1262.0 +/- 35.9
  Background counts = 27.4
  Rate = 0.03 +/- 0.0008
[Wed Sep 21 21:07:37 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 21:07:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 21:07:37 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 21:07:37 2011] Source does appear to be extended
[Wed Sep 21 21:07:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 21:08:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 21:08:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 21:08:21 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Wed Sep 21 21:08:21 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.853
[Wed Sep 21 21:08:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.55"
[Wed Sep 21 21:08:21 2011] fullrun_ccd3_acisf08009_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 21:08:21 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf08009_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 21:08:21 2011] fullrun_ccd3_acisf08009_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 21:08:21 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf08009_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 21:08:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08009_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08009_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 21:08:21 2011] fullrun_ccd3_acisf08009_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 21:08:21 2011] fullrun_ccd3_acisf08009_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 21:08:21 2011] Fit fullrun_ccd3_acisf08009_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 21:08:42 2011] Spatial fit model total counts = 1290.000000, observed total counts = 1290.000000
[Wed Sep 21 21:08:42 2011] Offset between fit and detection position for source 1 = 0.003166 pixels
[Wed Sep 21 21:08:42 2011] 1288.388400 total counts/ 27.198400 bgd. counts: snr = 241.829256
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003166 pixels
  Position = (314.5, 648.3) = 9 59 2.75 2 19 6.0
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 1261.2 +/- 35.9
  Background counts = 27.2
  Rate = 0.03 +/- 0.0008
[Wed Sep 21 21:08:42 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 21:08:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 21:08:42 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 21:08:42 2011] Source does appear to be extended
[Wed Sep 21 21:08:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 21:13:29 2011] Not overwriting source region fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 21 21:13:29 2011] Extracting stamp from image fullrun_ccd3_acisf08009_pi14-548_cl_sm2.00.img.gz, (289, 623) - (340, 674)
[Wed Sep 21 21:13:30 2011] Writing fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1.gif
[Wed Sep 21 21:13:31 2011] ../../acisf08009/products/events/fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_src.evt and ../../acisf08009/products/events/fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 21 21:13:31 2011] Size of ../../acisf08009/products/events/fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1275 counts
[Wed Sep 21 21:13:31 2011] Mean chipx,y = (873.69, 664.09)
[Wed Sep 21 21:13:31 2011] Mean tdetx,y = (4467.91, 3934.69)
[Wed Sep 21 21:13:31 2011] chipx,y range = (855.00-894.00, 645.00-683.00)
[Wed Sep 21 21:13:31 2011] Size of ../../acisf08009/products/events/fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 33 counts
[Wed Sep 21 21:13:31 2011] ../../acisf08009/products/images/fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_src.img and ../../acisf08009/products/images/fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 21 21:13:31 2011] ../../acisf08009/products/spectra/fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_src.pi and ../../acisf08009/products/spectra/fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 21 21:13:34 2011] ../../acisf08009/products/lightcurves/fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_src.lc and ../../acisf08009/products/lightcurves/fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 21 21:15:07 2011] Keeping rmf generated by specextract
[Wed Sep 21 21:15:07 2011] 198.355
[Wed Sep 21 21:15:44 2011] Updating aperture counts using extracted products
[Wed Sep 21 21:15:44 2011] Error reading totcts from fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 21 21:15:44 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 21:15:44 2011] Using photon index=1.80, rate=0.0275, arf fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 21:15:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 21:15:44 2011] Updating source flux to 3.2e-13
[Wed Sep 21 21:16:33 2011] Reading fit data from acisf08009/analysis//spectral/fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 21 21:16:33 2011] Spectral fit parameter nH value = 3.54396e+13
[Wed Sep 21 21:16:33 2011] Spectral fit parameter PhoIndex value = 1.64016
[Wed Sep 21 21:16:33 2011] Failed to get F(0.3-8.0) from acisf08009/analysis//spectral/fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 21:16:33 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 21:16:33 2011] Using Nh = 3.5e+13, photon index=1.64, rate=0.0275, arf fullrun_ccd3_acisf08009_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 21:16:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 21:16:33 2011] Updating source flux to 3.4e-13