[Wed Sep 21 13:39:49 2011] Detection parameters:
  Position = (869.3, 443.5) = 10 1 30.71 2 19 5.7
  Extent = 0.7" x 0.5", rotation angle = 165 degrees
  Source counts = 16.4 +/- 4.2
  Background counts = 1.6
  Rate = 0.0003 +/- 9e-05

[Wed Sep 21 13:39:51 2011] Off-axis axis estimate = 2.96'
[Wed Sep 21 13:41:13 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 13:41:13 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Wed Sep 21 13:41:13 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.814
[Wed Sep 21 13:41:13 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.57"
[Wed Sep 21 13:41:14 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass0_src16.ximg exists
[Wed Sep 21 13:41:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08001_pi14-548_cl_pass0_src16.csv
[Wed Sep 21 13:41:14 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass0_src16_1.ximg exists
[Wed Sep 21 13:41:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08001_pi14-548_cl_pass0_src16.csv
[Wed Sep 21 13:41:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08001_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08001_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 13:41:14 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Wed Sep 21 13:41:14 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Sep 21 13:41:14 2011] Fit fullrun_ccd3_acisf08001_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Wed Sep 21 13:41:33 2011] Spatial fit model total counts = 21.108000, observed total counts = 21.000000
[Wed Sep 21 13:41:33 2011] Offset between fit and detection position for source 7 = 0.377958 pixels
[Wed Sep 21 13:41:33 2011] 21.307710 total counts/ 6.039510 bgd. counts: snr = 6.212794
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.377958 pixels
  Position = (869.5, 443.8) = 10 1 30.72 2 19 5.7
  Extent = 0.6 (0.3-0.9)", rotation angle = 0
  Source counts = 15.3 +/- 4.6
  Background counts = 6.0
  Rate = 0.0003 +/- 9e-05
[Wed Sep 21 13:41:33 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 13:41:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 13:41:33 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 13:41:33 2011] Source does appear to be extended
[Wed Sep 21 13:41:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 13:42:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 13:42:04 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Wed Sep 21 13:42:04 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.011
[Wed Sep 21 13:42:04 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.60"
[Wed Sep 21 13:42:05 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass1_src16.ximg exists
[Wed Sep 21 13:42:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08001_pi14-548_cl_pass1_src16.csv
[Wed Sep 21 13:42:05 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass1_src16_1.ximg exists
[Wed Sep 21 13:42:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08001_pi14-548_cl_pass1_src16.csv
[Wed Sep 21 13:42:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08001_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08001_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 13:42:05 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Wed Sep 21 13:42:05 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Wed Sep 21 13:42:05 2011] Fit fullrun_ccd3_acisf08001_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Wed Sep 21 13:42:32 2011] Spatial fit model total counts = 21.979500, observed total counts = 22.000000
[Wed Sep 21 13:42:32 2011] Offset between fit and detection position for source 7 = 0.002499 pixels
[Wed Sep 21 13:42:32 2011] 22.299860 total counts/ 7.359960 bgd. counts: snr = 5.506935
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.002499 pixels
  Position = (869.5, 443.8) = 10 1 30.72 2 19 5.7
  Extent = 0.6 (0.3-0.9)", rotation angle = 0
  Source counts = 14.9 +/- 4.7
  Background counts = 7.4
  Rate = 0.0003 +/- 0.0001
[Wed Sep 21 13:42:32 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 13:42:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 13:42:32 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 13:42:32 2011] Source does appear to be extended
[Wed Sep 21 13:42:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 13:48:42 2011] Not overwriting source region fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7_src.reg
[Wed Sep 21 13:48:42 2011] Extracting stamp from image fullrun_ccd3_acisf08001_pi14-548_cl_sm2.00.img.gz, (842, 416) - (897, 472)
[Wed Sep 21 13:48:42 2011] Writing fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7.gif
[Wed Sep 21 13:49:47 2011] ../../acisf08001/products/events/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7_src.evt and ../../acisf08001/products/events/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Wed Sep 21 13:49:47 2011] Size of ../../acisf08001/products/events/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7_src.evt.gz[events] = 17 counts
[Wed Sep 21 13:49:47 2011] Mean chipx,y = (722.29, 747.24)
[Wed Sep 21 13:49:47 2011] Mean tdetx,y = (4384.76, 3783.29)
[Wed Sep 21 13:49:47 2011] chipx,y range = (704.00-736.00, 727.00-761.00)
[Wed Sep 21 13:49:47 2011] Size of ../../acisf08001/products/events/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 14 counts
[Wed Sep 21 13:49:47 2011] ../../acisf08001/products/images/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7_src.img and ../../acisf08001/products/images/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Wed Sep 21 13:49:47 2011] ../../acisf08001/products/spectra/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7_src.pi and ../../acisf08001/products/spectra/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Wed Sep 21 13:49:47 2011] Not generating rmf since there are only 14 counts
[Wed Sep 21 13:49:50 2011] ../../acisf08001/products/lightcurves/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7_src.lc and ../../acisf08001/products/lightcurves/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Wed Sep 21 13:50:45 2011] 195.95
[Wed Sep 21 13:51:11 2011] Updating aperture counts using extracted products
[Wed Sep 21 13:51:11 2011] Error reading totcts from fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7_src.pi.gz
[Wed Sep 21 13:51:11 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 13:51:11 2011] Using photon index=1.80, rate=0.000307, arf fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src7.arf
[Wed Sep 21 13:51:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 13:51:11 2011] Updating source flux to 3.6e-15
[Wed Sep 21 13:51:30 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting