[Wed Sep 21 13:39:48 2011] Detection parameters:
  Position = (1046.9, 618.6) = 10 1 24.88 2 20 31.9
  Extent = 0.5" x 0.5", rotation angle = 41 degrees
  Source counts = 125.4 +/- 11.3
  Background counts = 1.6
  Rate = 0.003 +/- 0.0002

[Wed Sep 21 13:39:51 2011] Off-axis axis estimate = 3.31'
[Wed Sep 21 13:41:13 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 13:41:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 13:41:13 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Wed Sep 21 13:41:13 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.909
[Wed Sep 21 13:41:13 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.65"
[Wed Sep 21 13:41:14 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 13:41:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08001_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 13:41:14 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 13:41:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08001_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 13:41:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08001_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08001_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 13:41:14 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 13:41:14 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 13:41:14 2011] Fit fullrun_ccd3_acisf08001_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 13:41:33 2011] Spatial fit model total counts = 126.435000, observed total counts = 129.000000
[Wed Sep 21 13:41:33 2011] Offset between fit and detection position for source 1 = 0.693108 pixels
[Wed Sep 21 13:41:33 2011] 126.980620 total counts/ 6.015620 bgd. counts: snr = 49.319599
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.693108 pixels
  Position = (1047.4, 619.1) = 10 1 24.88 2 20 31.9
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 121.0 +/- 11.3
  Background counts = 6.0
  Rate = 0.002 +/- 0.0002
[Wed Sep 21 13:41:33 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 13:41:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 13:41:33 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 13:41:33 2011] Source does appear to be extended
[Wed Sep 21 13:41:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 13:42:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 13:42:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 13:42:04 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Wed Sep 21 13:42:04 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.138
[Wed Sep 21 13:42:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.55"
[Wed Sep 21 13:42:05 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 13:42:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08001_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 13:42:05 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 13:42:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf08001_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 13:42:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf08001_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf08001_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 13:42:05 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 13:42:05 2011] fullrun_ccd3_acisf08001_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 13:42:05 2011] Fit fullrun_ccd3_acisf08001_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 13:42:32 2011] Spatial fit model total counts = 131.203000, observed total counts = 130.000000
[Wed Sep 21 13:42:32 2011] Offset between fit and detection position for source 1 = 0.024273 pixels
[Wed Sep 21 13:42:32 2011] 131.905920 total counts/ 8.023920 bgd. counts: snr = 43.733568
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.024273 pixels
  Position = (1047.4, 619.1) = 10 1 24.88 2 20 31.9
  Extent = 0.5 (0.5-0.6)", rotation angle = 0
  Source counts = 123.9 +/- 11.5
  Background counts = 8.0
  Rate = 0.003 +/- 0.0002
[Wed Sep 21 13:42:32 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 13:42:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 13:42:32 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 13:42:32 2011] Source does appear to be extended
[Wed Sep 21 13:42:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 13:48:41 2011] Not overwriting source region fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 21 13:48:41 2011] Extracting stamp from image fullrun_ccd3_acisf08001_pi14-548_cl_sm2.00.img.gz, (1022, 594) - (1072, 644)
[Wed Sep 21 13:48:41 2011] Writing fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1.gif
[Wed Sep 21 13:48:44 2011] ../../acisf08001/products/events/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_src.evt and ../../acisf08001/products/events/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 21 13:48:44 2011] Size of ../../acisf08001/products/events/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_src.evt.gz[events] = 125 counts
[Wed Sep 21 13:48:44 2011] Mean chipx,y = (935.76, 620.81)
[Wed Sep 21 13:48:44 2011] Mean tdetx,y = (4511.19, 3996.76)
[Wed Sep 21 13:48:44 2011] chipx,y range = (916.00-956.00, 600.00-635.00)
[Wed Sep 21 13:48:44 2011] Size of ../../acisf08001/products/events/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 15 counts
[Wed Sep 21 13:48:44 2011] ../../acisf08001/products/images/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_src.img and ../../acisf08001/products/images/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 21 13:48:44 2011] ../../acisf08001/products/spectra/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_src.pi and ../../acisf08001/products/spectra/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 21 13:48:47 2011] ../../acisf08001/products/lightcurves/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_src.lc and ../../acisf08001/products/lightcurves/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 21 13:50:42 2011] Keeping rmf generated by specextract
[Wed Sep 21 13:50:43 2011] 197.744
[Wed Sep 21 13:51:11 2011] Updating aperture counts using extracted products
[Wed Sep 21 13:51:11 2011] Error reading totcts from fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 21 13:51:11 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 13:51:11 2011] Using photon index=1.80, rate=0.00255, arf fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 13:51:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 13:51:11 2011] Updating source flux to 3e-14
[Wed Sep 21 13:51:35 2011] Reading fit data from acisf08001/analysis//spectral/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 21 13:51:35 2011] Spectral fit parameter nH value = 2.19757e+14
[Wed Sep 21 13:51:35 2011] Spectral fit parameter PhoIndex value = 1.87326
[Wed Sep 21 13:51:35 2011] Failed to get F(0.3-8.0) from acisf08001/analysis//spectral/fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 13:51:35 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 13:51:35 2011] Using Nh = 2.2e+14, photon index=1.87, rate=0.00255, arf fullrun_ccd3_acisf08001_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 13:51:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 13:51:35 2011] Updating source flux to 3e-14