[Wed Sep 21 13:39:45 2011] Detection parameters:
  Position = (1057.5, 844.5) = 10 1 16.35 2 14 3.2
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 13.8 +/- 3.9
  Background counts = 1.2
  Rate = 0.0003 +/- 8e-05

[Wed Sep 21 13:39:48 2011] Off-axis axis estimate = 3.51'
[Wed Sep 21 13:41:09 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 13:41:09 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Wed Sep 21 13:41:09 2011] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.615
[Wed Sep 21 13:41:09 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.69"
[Wed Sep 21 13:41:13 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src10.ximg exists
[Wed Sep 21 13:41:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src10.csv
[Wed Sep 21 13:41:13 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Sep 21 13:41:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src10.csv
[Wed Sep 21 13:41:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 13:41:13 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Sep 21 13:41:13 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Sep 21 13:41:13 2011] Fit fullrun_ccd2_acisf08001_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Sep 21 13:41:30 2011] Spatial fit model total counts = 22.223400, observed total counts = 23.000000
[Wed Sep 21 13:41:30 2011] Offset between fit and detection position for source 6 = 0.953789 pixels
[Wed Sep 21 13:41:30 2011] 21.719280 total counts/ 4.170780 bgd. counts: snr = 8.592734
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.953789 pixels
  Position = (1058.3, 845.0) = 10 1 16.34 2 14 3.2
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 17.5 +/- 4.7
  Background counts = 4.2
  Rate = 0.0004 +/- 0.0001
[Wed Sep 21 13:41:30 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 13:41:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 13:41:30 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 13:41:30 2011] Source does appear to be extended
[Wed Sep 21 13:41:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 13:42:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 13:42:02 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Wed Sep 21 13:42:02 2011] source mask rpix=1.3, npix_max = 13, mask sum = 14, frac = 1.062
[Wed Sep 21 13:42:02 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.65"
[Wed Sep 21 13:42:04 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src10.ximg exists
[Wed Sep 21 13:42:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src10.csv
[Wed Sep 21 13:42:04 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Sep 21 13:42:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src10.csv
[Wed Sep 21 13:42:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 13:42:04 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Sep 21 13:42:04 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Sep 21 13:42:04 2011] Fit fullrun_ccd2_acisf08001_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Sep 21 13:42:26 2011] Spatial fit model total counts = 22.021900, observed total counts = 23.000000
[Wed Sep 21 13:42:26 2011] Offset between fit and detection position for source 6 = 0.120742 pixels
[Wed Sep 21 13:42:26 2011] 21.126240 total counts/ 3.262840 bgd. counts: snr = 9.889316
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.120742 pixels
  Position = (1058.3, 845.1) = 10 1 16.35 2 14 3.2
  Extent = 0.6 (0.5-1.0)", rotation angle = 0
  Source counts = 17.9 +/- 4.6
  Background counts = 3.3
  Rate = 0.0004 +/- 9e-05
[Wed Sep 21 13:42:26 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 13:42:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 13:42:26 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 13:42:26 2011] Source does appear to be extended
[Wed Sep 21 13:42:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 13:47:48 2011] Not overwriting source region fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6_src.reg
[Wed Sep 21 13:47:48 2011] Extracting stamp from image fullrun_ccd2_acisf08001_pi14-548_cl_sm2.00.img.gz, (1030, 817) - (1086, 873)
[Wed Sep 21 13:47:48 2011] Writing fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6.gif
[Wed Sep 21 13:48:19 2011] ../../acisf08001/products/events/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6_src.evt and ../../acisf08001/products/events/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Wed Sep 21 13:48:19 2011] Size of ../../acisf08001/products/events/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6_src.evt.gz[events] = 20 counts
[Wed Sep 21 13:48:19 2011] Mean chipx,y = (25.30, 626.85)
[Wed Sep 21 13:48:19 2011] Mean tdetx,y = (3687.85, 4060.70)
[Wed Sep 21 13:48:19 2011] chipx,y range = (7.00-43.00, 607.00-641.00)
[Wed Sep 21 13:48:20 2011] Size of ../../acisf08001/products/events/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 13 counts
[Wed Sep 21 13:48:20 2011] ../../acisf08001/products/images/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6_src.img and ../../acisf08001/products/images/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Wed Sep 21 13:48:20 2011] ../../acisf08001/products/spectra/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6_src.pi and ../../acisf08001/products/spectra/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Wed Sep 21 13:48:20 2011] Not generating rmf since there are only 17 counts
[Wed Sep 21 13:48:23 2011] ../../acisf08001/products/lightcurves/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6_src.lc and ../../acisf08001/products/lightcurves/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Wed Sep 21 13:48:41 2011] 189.623
[Wed Sep 21 13:51:11 2011] Updating aperture counts using extracted products
[Wed Sep 21 13:51:11 2011] Error reading totcts from fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6_src.pi.gz
[Wed Sep 21 13:51:11 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 13:51:11 2011] Using photon index=1.80, rate=0.000367, arf fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src6.arf
[Wed Sep 21 13:51:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 13:51:11 2011] Updating source flux to 4.4e-15
[Wed Sep 21 13:51:27 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting