[Wed Sep 21 13:39:46 2011] Detection parameters:
  Position = (95.7, 934.5) = 10 1 47.93 2 14 47.4
  Extent = 1.3" x 1.1", rotation angle = 99 degrees
  Source counts = 124.3 +/- 11.7
  Background counts = 12.7
  Rate = 0.003 +/- 0.0002

[Wed Sep 21 13:39:48 2011] Off-axis axis estimate = 7.17'
[Wed Sep 21 13:41:09 2011] Using EEF radius (= 2.28 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 13:41:09 2011] Initial guess for spatial extent in simple fitting = 2.28"
[Wed Sep 21 13:41:09 2011] source mask rpix=4.6, npix_max = 105, mask sum = 110, frac = 1.042
[Wed Sep 21 13:41:09 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.28"
[Wed Sep 21 13:41:13 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src3.ximg exists
[Wed Sep 21 13:41:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src3.csv
[Wed Sep 21 13:41:13 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Sep 21 13:41:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src3.csv
[Wed Sep 21 13:41:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 13:41:13 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep 21 13:41:13 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep 21 13:41:13 2011] Fit fullrun_ccd2_acisf08001_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep 21 13:41:30 2011] Spatial fit model total counts = 143.065000, observed total counts = 142.000000
[Wed Sep 21 13:41:30 2011] Offset between fit and detection position for source 10 = 0.830069 pixels
[Wed Sep 21 13:41:30 2011] 144.344600 total counts/ 39.779600 bgd. counts: snr = 16.578916
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.830069 pixels
  Position = (96.1, 935.2) = 10 1 47.93 2 14 47.5
  Extent = 1.7 (1.4-2.1)", rotation angle = 0
  Source counts = 104.6 +/- 12.0
  Background counts = 39.8
  Rate = 0.002 +/- 0.0002
[Wed Sep 21 13:41:30 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 13:41:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 13:41:30 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 13:41:30 2011] Source does appear to be extended
[Wed Sep 21 13:41:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 13:42:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 13:42:02 2011] Initial guess for spatial extent in simple fitting = 1.73"
[Wed Sep 21 13:42:02 2011] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.987
[Wed Sep 21 13:42:02 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.73"
[Wed Sep 21 13:42:03 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src3.ximg exists
[Wed Sep 21 13:42:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src3.csv
[Wed Sep 21 13:42:03 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Sep 21 13:42:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src3.csv
[Wed Sep 21 13:42:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 13:42:04 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 21 13:42:04 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 21 13:42:04 2011] Fit fullrun_ccd2_acisf08001_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 21 13:42:26 2011] Spatial fit model total counts = 126.061000, observed total counts = 125.000000
[Wed Sep 21 13:42:26 2011] Offset between fit and detection position for source 10 = 0.585349 pixels
[Wed Sep 21 13:42:26 2011] 128.061100 total counts/ 34.080300 bgd. counts: snr = 16.098575
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.585349 pixels
  Position = (96.1, 934.6) = 10 1 47.93 2 14 47.2
  Extent = 1.6 (1.1-2.2)", rotation angle = 0
  Source counts = 94.0 +/- 11.3
  Background counts = 34.1
  Rate = 0.002 +/- 0.0002
[Wed Sep 21 13:42:26 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 13:42:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 13:42:26 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 13:42:26 2011] Source does appear to be extended
[Wed Sep 21 13:42:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 13:47:48 2011] Not overwriting source region fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10_src.reg
[Wed Sep 21 13:47:48 2011] Extracting stamp from image fullrun_ccd2_acisf08001_pi14-548_cl_sm2.00.img.gz, (24, 862) - (168, 1007)
[Wed Sep 21 13:47:48 2011] Writing fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10.gif
[Wed Sep 21 13:47:56 2011] ../../acisf08001/products/events/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10_src.evt and ../../acisf08001/products/events/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Sep 21 13:47:56 2011] Size of ../../acisf08001/products/events/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10_src.evt.gz[events] = 131 counts
[Wed Sep 21 13:47:56 2011] Mean chipx,y = (940.90, 940.27)
[Wed Sep 21 13:47:56 2011] Mean tdetx,y = (4001.27, 3145.10)
[Wed Sep 21 13:47:56 2011] chipx,y range = (915.00-962.00, 911.00-963.00)
[Wed Sep 21 13:47:56 2011] Size of ../../acisf08001/products/events/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 83 counts
[Wed Sep 21 13:47:56 2011] ../../acisf08001/products/images/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10_src.img and ../../acisf08001/products/images/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Sep 21 13:47:56 2011] ../../acisf08001/products/spectra/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10_src.pi and ../../acisf08001/products/spectra/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Sep 21 13:47:56 2011] Not generating rmf since there are only 93 counts
[Wed Sep 21 13:47:59 2011] ../../acisf08001/products/lightcurves/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10_src.lc and ../../acisf08001/products/lightcurves/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Sep 21 13:48:41 2011] 163.562
[Wed Sep 21 13:51:11 2011] Updating aperture counts using extracted products
[Wed Sep 21 13:51:11 2011] Error reading totcts from fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Sep 21 13:51:11 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 13:51:11 2011] Using photon index=1.80, rate=0.00193, arf fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src10.arf
[Wed Sep 21 13:51:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 13:51:11 2011] Updating source flux to 2.7e-14
[Wed Sep 21 13:51:27 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting