[Wed Sep 21 13:39:45 2011] Detection parameters:
  Position = (879.5, 786.5) = 10 1 22.20 2 13 34.7
  Extent = 0.9" x 0.6", rotation angle = 123 degrees
  Source counts = 196.9 +/- 14.2
  Background counts = 4.1
  Rate = 0.004 +/- 0.0003

[Wed Sep 21 13:39:48 2011] Off-axis axis estimate = 3.79'
[Wed Sep 21 13:41:09 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 13:41:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 13:41:09 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Wed Sep 21 13:41:09 2011] source mask rpix=1.6, npix_max = 16, mask sum = 25, frac = 1.472
[Wed Sep 21 13:41:09 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.77"
[Wed Sep 21 13:41:13 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 13:41:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 13:41:13 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 13:41:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 13:41:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08001_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 13:41:13 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 13:41:13 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 13:41:13 2011] Fit fullrun_ccd2_acisf08001_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 13:41:30 2011] Spatial fit model total counts = 202.196000, observed total counts = 201.000000
[Wed Sep 21 13:41:30 2011] Offset between fit and detection position for source 1 = 0.710310 pixels
[Wed Sep 21 13:41:30 2011] 203.741200 total counts/ 22.789200 bgd. counts: snr = 37.905205
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.710310 pixels
  Position = (880.1, 786.8) = 10 1 22.19 2 13 34.5
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 181.0 +/- 14.3
  Background counts = 22.8
  Rate = 0.004 +/- 0.0003
[Wed Sep 21 13:41:30 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 13:41:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 13:41:30 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 13:41:30 2011] Source does appear to be extended
[Wed Sep 21 13:41:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 13:42:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 13:42:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 13:42:02 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Wed Sep 21 13:42:02 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.902
[Wed Sep 21 13:42:02 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.79"
[Wed Sep 21 13:42:03 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 13:42:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 13:42:03 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 13:42:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 13:42:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf08001_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 13:42:04 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 13:42:04 2011] fullrun_ccd2_acisf08001_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 13:42:04 2011] Fit fullrun_ccd2_acisf08001_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 13:42:26 2011] Spatial fit model total counts = 202.263000, observed total counts = 201.000000
[Wed Sep 21 13:42:26 2011] Offset between fit and detection position for source 1 = 0.045195 pixels
[Wed Sep 21 13:42:26 2011] 201.353800 total counts/ 20.177800 bgd. counts: snr = 40.333300
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.045195 pixels
  Position = (880.1, 786.9) = 10 1 22.19 2 13 34.6
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 181.2 +/- 14.2
  Background counts = 20.2
  Rate = 0.004 +/- 0.0003
[Wed Sep 21 13:42:26 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 13:42:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 13:42:26 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 13:42:26 2011] Source does appear to be extended
[Wed Sep 21 13:42:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 13:47:48 2011] Not overwriting source region fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 21 13:47:48 2011] Extracting stamp from image fullrun_ccd2_acisf08001_pi14-548_cl_sm2.00.img.gz, (844, 751) - (916, 823)
[Wed Sep 21 13:47:48 2011] Writing fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1.gif
[Wed Sep 21 13:47:50 2011] ../../acisf08001/products/events/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_src.evt and ../../acisf08001/products/events/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 21 13:47:50 2011] Size of ../../acisf08001/products/events/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_src.evt.gz[events] = 195 counts
[Wed Sep 21 13:47:50 2011] Mean chipx,y = (214.47, 608.60)
[Wed Sep 21 13:47:50 2011] Mean tdetx,y = (3669.60, 3871.53)
[Wed Sep 21 13:47:50 2011] chipx,y range = (193.00-231.00, 590.00-628.00)
[Wed Sep 21 13:47:50 2011] Size of ../../acisf08001/products/events/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 27 counts
[Wed Sep 21 13:47:50 2011] ../../acisf08001/products/images/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_src.img and ../../acisf08001/products/images/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 21 13:47:50 2011] ../../acisf08001/products/spectra/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_src.pi and ../../acisf08001/products/spectra/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 21 13:47:53 2011] ../../acisf08001/products/lightcurves/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_src.lc and ../../acisf08001/products/lightcurves/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 21 13:48:41 2011] Keeping rmf generated by specextract
[Wed Sep 21 13:48:41 2011] 178.087
[Wed Sep 21 13:51:11 2011] Updating aperture counts using extracted products
[Wed Sep 21 13:51:11 2011] Error reading totcts from fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 21 13:51:11 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 13:51:11 2011] Using photon index=1.80, rate=0.00372, arf fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 13:51:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 13:51:11 2011] Updating source flux to 4.8e-14
[Wed Sep 21 13:51:30 2011] Reading fit data from acisf08001/analysis//spectral/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 21 13:51:30 2011] Spectral fit parameter nH value = 2.19661e+21
[Wed Sep 21 13:51:30 2011] Spectral fit parameter PhoIndex value = 1.82038
[Wed Sep 21 13:51:30 2011] Failed to get F(0.3-8.0) from acisf08001/analysis//spectral/fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 13:51:30 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 13:51:30 2011] Using Nh = 2.2e+21, photon index=1.82, rate=0.00372, arf fullrun_ccd2_acisf08001_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 13:51:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 13:51:30 2011] Updating source flux to 4.6e-14