[Thu Sep 22 19:58:13 2011] Detection parameters:
  Position = (411.2, 992.4) = 10 0 51.13 2 28 37.3
  Extent = 0.5" x 0.5", rotation angle = 73 degrees
  Source counts = 10.3 +/- 3.3
  Background counts = 0.7
  Rate = 0.0002 +/- 7e-05

[Thu Sep 22 19:58:15 2011] Off-axis axis estimate = 2.93'
[Thu Sep 22 19:59:44 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 19:59:44 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Thu Sep 22 19:59:44 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.827
[Thu Sep 22 19:59:44 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.57"
[Thu Sep 22 19:59:45 2011] fullrun_ccd3_acisf07997_pi14-548_cl_pass0_src16.ximg exists
[Thu Sep 22 19:59:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07997_pi14-548_cl_pass0_src16.csv
[Thu Sep 22 19:59:45 2011] fullrun_ccd3_acisf07997_pi14-548_cl_pass0_src16_1.ximg exists
[Thu Sep 22 19:59:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07997_pi14-548_cl_pass0_src16.csv
[Thu Sep 22 19:59:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07997_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07997_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 19:59:45 2011] fullrun_ccd3_acisf07997_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Thu Sep 22 19:59:45 2011] fullrun_ccd3_acisf07997_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Thu Sep 22 19:59:45 2011] Fit fullrun_ccd3_acisf07997_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Thu Sep 22 20:00:07 2011] Spatial fit model total counts = 12.165100, observed total counts = 13.000000
[Thu Sep 22 20:00:07 2011] Offset between fit and detection position for source 19 = 0.804547 pixels
[Thu Sep 22 20:00:07 2011] 11.497402 total counts/ 0.009702 bgd. counts: snr = 116.627117
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.804547 pixels
  Position = (411.8, 992.9) = 10 0 51.13 2 28 37.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 11.5 +/- 3.4
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Thu Sep 22 20:00:07 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 20:00:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 20:00:07 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 20:00:07 2011] Source does appear to be extended
[Thu Sep 22 20:00:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 20:00:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 20:00:41 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Thu Sep 22 20:00:41 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.969
[Thu Sep 22 20:00:41 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.50"
[Thu Sep 22 20:00:41 2011] fullrun_ccd3_acisf07997_pi14-548_cl_pass1_src15.ximg exists
[Thu Sep 22 20:00:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07997_pi14-548_cl_pass1_src15.csv
[Thu Sep 22 20:00:41 2011] fullrun_ccd3_acisf07997_pi14-548_cl_pass1_src15_1.ximg exists
[Thu Sep 22 20:00:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07997_pi14-548_cl_pass1_src15.csv
[Thu Sep 22 20:00:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07997_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07997_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 20:00:43 2011] fullrun_ccd3_acisf07997_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Thu Sep 22 20:00:43 2011] fullrun_ccd3_acisf07997_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Sep 22 20:00:43 2011] Fit fullrun_ccd3_acisf07997_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Sep 22 20:00:57 2011] Spatial fit model total counts = 11.074500, observed total counts = 13.000000
[Thu Sep 22 20:00:57 2011] Offset between fit and detection position for source 19 = 0.065991 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.065991 pixels
  Position = (411.8, 993.0) = 10 0 51.13 2 28 37.3
  Extent = 0.6 (0.4-1.0)" x 0.3 (0.2-0.5)", rotation angle = 107 (90-142) degrees
  Source counts = 10.5 +/- 3.2
  Background counts = 0.0
  Rate = 0.0002 +/- 7e-05
[Thu Sep 22 20:00:57 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 20:00:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 20:00:57 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 20:00:57 2011] Source does appear to be extended
[Thu Sep 22 20:00:57 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.85
[Thu Sep 22 20:06:01 2011] Not overwriting source region fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19_src.reg
[Thu Sep 22 20:06:01 2011] Extracting stamp from image fullrun_ccd3_acisf07997_pi14-548_cl_sm2.00.img.gz, (383, 965) - (440, 1021)
[Thu Sep 22 20:06:01 2011] Writing fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19.gif
[Thu Sep 22 20:07:04 2011] ../../acisf07997/products/events/fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19_src.evt and ../../acisf07997/products/events/fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19_bgd.evt exist, delete to re-create
[Thu Sep 22 20:07:04 2011] Size of ../../acisf07997/products/events/fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19_src.evt.gz[events] = 11 counts
[Thu Sep 22 20:07:04 2011] Mean chipx,y = (624.91, 903.64)
[Thu Sep 22 20:07:04 2011] Mean tdetx,y = (4228.36, 3685.91)
[Thu Sep 22 20:07:04 2011] chipx,y range = (601.00-636.00, 886.00-918.00)
[Thu Sep 22 20:07:04 2011] Size of ../../acisf07997/products/events/fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 9 counts
[Thu Sep 22 20:07:04 2011] ../../acisf07997/products/images/fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19_src.img and ../../acisf07997/products/images/fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19_bgd.img exist, delete to re-create
[Thu Sep 22 20:07:04 2011] ../../acisf07997/products/spectra/fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19_src.pi and ../../acisf07997/products/spectra/fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19_bgd.pi exist, delete to re-create
[Thu Sep 22 20:07:04 2011] Not generating rmf since there are only 10 counts
[Thu Sep 22 20:07:08 2011] ../../acisf07997/products/lightcurves/fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19_src.lc and ../../acisf07997/products/lightcurves/fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19_bgd.lc exist, delete to re-create
[Thu Sep 22 20:07:39 2011] 192.55
[Thu Sep 22 20:07:57 2011] Updating aperture counts using extracted products
[Thu Sep 22 20:07:57 2011] Error reading totcts from fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19_src.pi.gz
[Thu Sep 22 20:07:57 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 20:07:57 2011] Using photon index=1.80, rate=0.00023, arf fullrun_ccd3_acisf07997_pi14-548_pass1_cl_src19.arf
[Thu Sep 22 20:07:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 20:07:57 2011] Updating source flux to 2.8e-15
[Thu Sep 22 20:08:19 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting