[Mon Oct  3 13:21:27 2011] Detection parameters:
  Position = (588.5, 952.5) = 13 15 24.04 -16 22 45.0
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 12.5 +/- 8.1
  Background counts = 52.5
  Rate = 0.0006 +/- 0.0004

[Mon Oct  3 13:21:28 2011] Off-axis axis estimate = 0.45'
[Mon Oct  3 13:22:32 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 13:22:32 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Oct  3 13:22:32 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.883
[Mon Oct  3 13:22:32 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.40"
[Mon Oct  3 13:22:34 2011] fullrun_ccd7_acisf00798_pi14-548_cl_pass0_src19.ximg exists
[Mon Oct  3 13:22:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00798_pi14-548_cl_pass0_src19.csv
[Mon Oct  3 13:22:34 2011] fullrun_ccd7_acisf00798_pi14-548_cl_pass0_src19_1.ximg exists
[Mon Oct  3 13:22:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00798_pi14-548_cl_pass0_src19.csv
[Mon Oct  3 13:22:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00798_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00798_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 13:22:35 2011] fullrun_ccd7_acisf00798_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Mon Oct  3 13:22:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00798_pi14-548_cl_pass0_tfrozen_src19.csv
[Mon Oct  3 13:22:35 2011] fullrun_ccd7_acisf00798_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Oct  3 13:22:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00798_pi14-548_cl_pass0_tfrozen_src19.csv
[Mon Oct  3 13:22:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00798_pi14-548_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00798_pi14-548_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 13:22:44 2011] Source 16 is offset by -0.269526 and -2.216081 pixels which is larger than
2 X fitted extent = 0.867594 x 1.695995, not incorporating fit results
[Mon Oct  3 13:22:44 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 13:22:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 13:22:44 2011] Assessing source extent using major
[Mon Oct  3 13:22:44 2011] Source does appear to be extended
[Mon Oct  3 13:22:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 13:22:44 2011] Deleting source due to low Poisson probability 0.8