[Wed Sep 21 16:21:18 2011] Detection parameters:
  Position = (1092.1, 793.6) = 14 27 14.92 32 45 7.7
  Extent = 0.5" x 0.5", rotation angle = 64 degrees
  Source counts = 12.2 +/- 3.6
  Background counts = 0.8
  Rate = 0.0003 +/- 9e-05

[Wed Sep 21 16:21:20 2011] Off-axis axis estimate = 1.35'
[Wed Sep 21 16:22:20 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 16:22:20 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Sep 21 16:22:20 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.909
[Wed Sep 21 16:22:20 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.39"
[Wed Sep 21 16:22:21 2011] fullrun_ccd3_acisf07948_pi14-548_cl_pass0_src10.ximg exists
[Wed Sep 21 16:22:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07948_pi14-548_cl_pass0_src10.csv
[Wed Sep 21 16:22:21 2011] fullrun_ccd3_acisf07948_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Sep 21 16:22:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07948_pi14-548_cl_pass0_src10.csv
[Wed Sep 21 16:22:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07948_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07948_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 16:22:21 2011] fullrun_ccd3_acisf07948_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Sep 21 16:22:21 2011] fullrun_ccd3_acisf07948_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Sep 21 16:22:21 2011] Fit fullrun_ccd3_acisf07948_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Sep 21 16:22:34 2011] Spatial fit model total counts = 14.521800, observed total counts = 15.000000
[Wed Sep 21 16:22:34 2011] Offset between fit and detection position for source 6 = 0.722114 pixels
[Wed Sep 21 16:22:34 2011] 14.986520 total counts/ 2.314720 bgd. counts: snr = 8.328927
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.722114 pixels
  Position = (1092.6, 794.1) = 14 27 14.92 32 45 7.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 12.7 +/- 3.9
  Background counts = 2.3
  Rate = 0.0003 +/- 9e-05
[Wed Sep 21 16:22:34 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 16:22:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 16:22:34 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 16:22:34 2011] Source does appear to be extended
[Wed Sep 21 16:22:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 16:23:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 16:23:02 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Wed Sep 21 16:23:02 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.053
[Wed Sep 21 16:23:02 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.47"
[Wed Sep 21 16:23:03 2011] fullrun_ccd3_acisf07948_pi14-548_cl_pass1_src10.ximg exists
[Wed Sep 21 16:23:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07948_pi14-548_cl_pass1_src10.csv
[Wed Sep 21 16:23:03 2011] fullrun_ccd3_acisf07948_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Sep 21 16:23:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07948_pi14-548_cl_pass1_src10.csv
[Wed Sep 21 16:23:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07948_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07948_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 16:23:03 2011] fullrun_ccd3_acisf07948_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Sep 21 16:23:03 2011] fullrun_ccd3_acisf07948_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Sep 21 16:23:03 2011] Fit fullrun_ccd3_acisf07948_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Sep 21 16:23:14 2011] Spatial fit model total counts = 15.048100, observed total counts = 15.000000
[Wed Sep 21 16:23:14 2011] Offset between fit and detection position for source 6 = 0.033041 pixels
[Wed Sep 21 16:23:14 2011] 15.341180 total counts/ 2.400080 bgd. counts: snr = 8.353305
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.033041 pixels
  Position = (1092.6, 794.1) = 14 27 14.92 32 45 7.8
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 12.9 +/- 3.9
  Background counts = 2.4
  Rate = 0.0003 +/- 9e-05
[Wed Sep 21 16:23:14 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 16:23:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 16:23:14 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 16:23:14 2011] Source does appear to be extended
[Wed Sep 21 16:23:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 16:27:31 2011] Not overwriting source region fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6_src.reg
[Wed Sep 21 16:27:31 2011] Extracting stamp from image fullrun_ccd3_acisf07948_pi14-548_cl_sm2.00.img.gz, (1071, 772) - (1114, 816)
[Wed Sep 21 16:27:31 2011] Writing fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6.gif
[Wed Sep 21 16:28:08 2011] ../../acisf07948/products/events/fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6_src.evt and ../../acisf07948/products/events/fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Wed Sep 21 16:28:09 2011] Size of ../../acisf07948/products/events/fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6_src.evt.gz[events] = 13 counts
[Wed Sep 21 16:28:09 2011] Mean chipx,y = (794.23, 981.00)
[Wed Sep 21 16:28:09 2011] Mean tdetx,y = (4151.00, 3855.23)
[Wed Sep 21 16:28:09 2011] chipx,y range = (780.00-810.00, 970.00-996.00)
[Wed Sep 21 16:28:09 2011] Size of ../../acisf07948/products/events/fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 6 counts
[Wed Sep 21 16:28:09 2011] ../../acisf07948/products/images/fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6_src.img and ../../acisf07948/products/images/fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Wed Sep 21 16:28:09 2011] ../../acisf07948/products/spectra/fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6_src.pi and ../../acisf07948/products/spectra/fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Wed Sep 21 16:28:09 2011] Not generating rmf since there are only 12 counts
[Wed Sep 21 16:28:12 2011] ../../acisf07948/products/lightcurves/fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6_src.lc and ../../acisf07948/products/lightcurves/fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Wed Sep 21 16:29:07 2011] 200.441
[Wed Sep 21 16:29:17 2011] Updating aperture counts using extracted products
[Wed Sep 21 16:29:17 2011] Error reading totcts from fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6_src.pi.gz
[Wed Sep 21 16:29:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 16:29:18 2011] Using photon index=1.80, rate=0.000307, arf fullrun_ccd3_acisf07948_pi14-548_pass1_cl_src6.arf
[Wed Sep 21 16:29:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 16:29:18 2011] Updating source flux to 3.5e-15
[Wed Sep 21 16:29:38 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting