[Thu Sep 22 09:43:19 2011] Detection parameters:
  Position = (601.1, 925.9) = 14 28 22.10 34 24 13.7
  Extent = 0.7" x 0.5", rotation angle = 109 degrees
  Source counts = 29.5 +/- 5.6
  Background counts = 1.5
  Rate = 0.0007 +/- 0.0001

[Thu Sep 22 09:43:21 2011] Off-axis axis estimate = 3.80'
[Thu Sep 22 09:44:44 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 09:44:44 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Thu Sep 22 09:44:44 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.936
[Thu Sep 22 09:44:44 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.77"
[Thu Sep 22 09:44:44 2011] fullrun_ccd3_acisf07944_pi14-548_cl_pass0_src8.ximg exists
[Thu Sep 22 09:44:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07944_pi14-548_cl_pass0_src8.csv
[Thu Sep 22 09:44:44 2011] fullrun_ccd3_acisf07944_pi14-548_cl_pass0_src8_1.ximg exists
[Thu Sep 22 09:44:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07944_pi14-548_cl_pass0_src8.csv
[Thu Sep 22 09:44:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07944_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07944_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 09:44:45 2011] fullrun_ccd3_acisf07944_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Thu Sep 22 09:44:45 2011] fullrun_ccd3_acisf07944_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Sep 22 09:44:45 2011] Fit fullrun_ccd3_acisf07944_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Sep 22 09:45:19 2011] Spatial fit model total counts = 33.003700, observed total counts = 33.000000
[Thu Sep 22 09:45:19 2011] Offset between fit and detection position for source 10 = 0.555352 pixels
[Thu Sep 22 09:45:19 2011] 32.777680 total counts/ 6.327380 bgd. counts: snr = 10.515227
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.555352 pixels
  Position = (601.7, 926.0) = 14 28 22.10 34 24 13.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 26.5 +/- 5.7
  Background counts = 6.3
  Rate = 0.0007 +/- 0.0001
[Thu Sep 22 09:45:19 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 09:45:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 09:45:19 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 09:45:19 2011] Source does appear to be extended
[Thu Sep 22 09:45:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 09:45:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 09:45:50 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Thu Sep 22 09:45:50 2011] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.747
[Thu Sep 22 09:45:50 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.45"
[Thu Sep 22 09:45:51 2011] fullrun_ccd3_acisf07944_pi14-548_cl_pass1_src8.ximg exists
[Thu Sep 22 09:45:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07944_pi14-548_cl_pass1_src8.csv
[Thu Sep 22 09:45:51 2011] fullrun_ccd3_acisf07944_pi14-548_cl_pass1_src8_1.ximg exists
[Thu Sep 22 09:45:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07944_pi14-548_cl_pass1_src8.csv
[Thu Sep 22 09:45:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07944_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07944_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 09:45:52 2011] fullrun_ccd3_acisf07944_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Thu Sep 22 09:45:52 2011] fullrun_ccd3_acisf07944_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Sep 22 09:45:52 2011] Fit fullrun_ccd3_acisf07944_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Sep 22 09:46:09 2011] Spatial fit model total counts = 32.968800, observed total counts = 33.000000
[Thu Sep 22 09:46:09 2011] Offset between fit and detection position for source 10 = 0.005362 pixels
[Thu Sep 22 09:46:09 2011] 32.743380 total counts/ 6.318080 bgd. counts: snr = 10.513017
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.005362 pixels
  Position = (601.7, 926.0) = 14 28 22.10 34 24 13.5
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 26.4 +/- 5.7
  Background counts = 6.3
  Rate = 0.0007 +/- 0.0001
[Thu Sep 22 09:46:09 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 09:46:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 09:46:09 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 09:46:09 2011] Source does appear to be extended
[Thu Sep 22 09:46:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 09:51:27 2011] Not overwriting source region fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10_src.reg
[Thu Sep 22 09:51:27 2011] Extracting stamp from image fullrun_ccd3_acisf07944_pi14-548_cl_sm2.00.img.gz, (581, 905) - (622, 947)
[Thu Sep 22 09:51:27 2011] Writing fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10.gif
[Thu Sep 22 09:51:51 2011] ../../acisf07944/products/events/fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10_src.evt and ../../acisf07944/products/events/fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Thu Sep 22 09:51:51 2011] Size of ../../acisf07944/products/events/fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10_src.evt.gz[events] = 27 counts
[Thu Sep 22 09:51:51 2011] Mean chipx,y = (909.78, 562.48)
[Thu Sep 22 09:51:51 2011] Mean tdetx,y = (4569.52, 3970.78)
[Thu Sep 22 09:51:51 2011] chipx,y range = (887.00-922.00, 544.00-578.00)
[Thu Sep 22 09:51:51 2011] Size of ../../acisf07944/products/events/fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 8 counts
[Thu Sep 22 09:51:51 2011] ../../acisf07944/products/images/fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10_src.img and ../../acisf07944/products/images/fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Thu Sep 22 09:51:51 2011] ../../acisf07944/products/spectra/fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10_src.pi and ../../acisf07944/products/spectra/fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Thu Sep 22 09:51:51 2011] Not generating rmf since there are only 26 counts
[Thu Sep 22 09:51:55 2011] ../../acisf07944/products/lightcurves/fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10_src.lc and ../../acisf07944/products/lightcurves/fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Thu Sep 22 09:53:09 2011] 195.587
[Thu Sep 22 09:53:22 2011] Updating aperture counts using extracted products
[Thu Sep 22 09:53:22 2011] Error reading totcts from fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10_src.pi.gz
[Thu Sep 22 09:53:22 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 09:53:22 2011] Using photon index=1.80, rate=0.000654, arf fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10.arf
[Thu Sep 22 09:53:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 09:53:22 2011] Updating source flux to 7.8e-15
[Thu Sep 22 09:53:39 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep 22 09:53:40 2011] acisf07944/analysis//spectral/fullrun_ccd3_acisf07944_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete