[Wed Feb 22 07:37:13 2012] Detection parameters:
  Position = (706.4, 156.3) = 2 21 43.95 42 16 30.6
  Extent = 3.3" x 2.4", rotation angle = 15 degrees
  Source counts = 471.3 +/- 23.7
  Background counts = 91.7
  Rate = 0.009 +/- 0.0005

[Wed Feb 22 07:37:13 2012] Off-axis axis estimate = 8.32'
[Wed Feb 22 09:33:09 2012] Using EEF radius (= 3.06 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 09:33:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 09:33:09 2012] Initial guess for spatial extent in simple fitting = 3.06"
[Wed Feb 22 09:33:09 2012] source mask rpix=6.2, npix_max = 180, mask sum = 169, frac = 0.938
[Wed Feb 22 09:33:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.06"
[Wed Feb 22 09:49:52 2012] fullrun_ccd6_acisf00794_pi14-548_cl_pass0_src1.ximg exists
[Wed Feb 22 09:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00794_pi14-548_cl_pass0_src1.csv
[Wed Feb 22 09:49:52 2012] fullrun_ccd6_acisf00794_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Feb 22 09:49:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00794_pi14-548_cl_pass0_src1.csv
[Wed Feb 22 09:49:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00794_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00794_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 09:49:53 2012] fullrun_ccd6_acisf00794_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 22 09:49:53 2012] fullrun_ccd6_acisf00794_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 22 09:49:53 2012] Fit fullrun_ccd6_acisf00794_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 22 10:38:47 2012] Spatial fit model total counts = 481.579000, observed total counts = 491.000000
[Wed Feb 22 10:38:47 2012] Offset between fit and detection position for source 15 = 2.301482 pixels
[Wed Feb 22 10:38:47 2012] 487.309300 total counts/ 98.692300 bgd. counts: snr = 39.118317
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 2.301482 pixels
  Position = (704.1, 155.8) = 2 21 44.07 42 16 30.2
  Extent = 4.2 (3.6-4.7)", rotation angle = 0
  Source counts = 388.6 +/- 22.1
  Background counts = 98.7
  Rate = 0.008 +/- 0.0004
[Wed Feb 22 10:38:47 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 10:38:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 10:38:47 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 10:38:47 2012] Source does appear to be extended
[Wed Feb 22 10:38:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 11:55:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 11:55:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 11:55:17 2012] Initial guess for spatial extent in simple fitting = 4.16"
[Wed Feb 22 11:55:17 2012] source mask rpix=8.5, npix_max = 320, mask sum = 324, frac = 1.010
[Wed Feb 22 11:55:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.16"
[Wed Feb 22 12:14:33 2012] fullrun_ccd6_acisf00794_pi14-548_cl_pass1_src1.ximg exists
[Wed Feb 22 12:14:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00794_pi14-548_cl_pass1_src1.csv
[Wed Feb 22 12:14:33 2012] fullrun_ccd6_acisf00794_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Feb 22 12:14:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00794_pi14-548_cl_pass1_src1.csv
[Wed Feb 22 12:14:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00794_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00794_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 12:14:33 2012] fullrun_ccd6_acisf00794_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 22 12:14:33 2012] fullrun_ccd6_acisf00794_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 22 12:14:33 2012] Fit fullrun_ccd6_acisf00794_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Feb 22 12:54:53 2012] Spatial fit model total counts = 554.990000, observed total counts = 555.000000
[Wed Feb 22 12:54:53 2012] Offset between fit and detection position for source 15 = 2.647863 pixels
[Wed Feb 22 12:54:53 2012] 557.161000 total counts/ 165.599000 bgd. counts: snr = 30.427879
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 2.647863 pixels
  Position = (706.6, 156.7) = 2 21 43.96 42 16 30.6
  Extent = 4.2 (3.7-4.7)", rotation angle = 0
  Source counts = 391.6 +/- 23.6
  Background counts = 165.6
  Rate = 0.008 +/- 0.0005
[Wed Feb 22 12:54:53 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 12:54:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 12:54:53 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 12:54:53 2012] Source does appear to be extended
[Wed Feb 22 12:54:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 13:04:06 2012] Writing source region out to fullrun_ccd6_acisf00794_pi14-548_pass1_cl_src15_src.reg
[Wed Feb 22 13:04:06 2012] Extracting stamp from image fullrun_ccd6_acisf00794_pi14-548_cl_sm2.00.img.gz, (517, 0) - (897, 347)
[Wed Feb 22 13:04:06 2012] Writing fullrun_ccd6_acisf00794_pi14-548_pass1_cl_src15.gif
[Wed Feb 22 13:04:08 2012] Size of ../../acisf00794/products/events/fullrun_ccd6_acisf00794_pi14-548_pass1_cl_src15_src.evt.gz[events] = 549 counts
[Wed Feb 22 13:04:08 2012] Mean chipx,y = (329.07, 110.65)
[Wed Feb 22 13:04:08 2012] Mean tdetx,y = (3204.07, 1812.65)
[Wed Feb 22 13:04:08 2012] chipx,y range = (286.00-372.00, 61.00-148.00)
[Wed Feb 22 13:04:08 2012] Size of ../../acisf00794/products/events/fullrun_ccd6_acisf00794_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 487 counts
[Wed Feb 22 13:04:09 2012] rmf not found, will run specextract
[Wed Feb 22 13:04:09 2012] arf not found, will run specextract
[Wed Feb 22 13:04:28 2012] ../../acisf00794/products/spectra/fullrun_ccd6_acisf00794_pi14-548_pass1_cl_src15.warf not found
[Wed Feb 22 13:04:28 2012] ../../acisf00794/products/spectra/fullrun_ccd6_acisf00794_pi14-548_pass1_cl_src15.wrmf not found
[Wed Feb 22 13:04:28 2012] Removal of ../../acisf00794/products/spectra/fullrun_ccd6_acisf00794_pi14-548_pass1_cl_src15.soff failed
[Wed Feb 22 13:10:22 2012] Keeping rmf generated by specextract
[Wed Feb 22 13:10:22 2012] 180.174
[Wed Feb 22 13:24:52 2012] Updating aperture counts using extracted products
[Wed Feb 22 13:24:52 2012] Error reading totcts from fullrun_ccd6_acisf00794_pi14-548_pass1_cl_src15_src.pi.gz
[Wed Feb 22 13:24:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 13:24:52 2012] Using photon index=1.80, rate=0.00769, arf fullrun_ccd6_acisf00794_pi14-548_pass1_cl_src15.arf
[Wed Feb 22 13:24:52 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 22 13:24:52 2012] Updating source flux to 8.3e-14
[Wed Feb 22 13:25:13 2012] Reading fit data from acisf00794/analysis//spectral/fullrun_ccd6_acisf00794_pi14-548_pass1_cl_src15_pl.csv
[Wed Feb 22 13:25:13 2012] Spectral fit parameter nH value = 8.80772e+12
[Wed Feb 22 13:25:13 2012] Spectral fit parameter PhoIndex value = 1.52718
[Wed Feb 22 13:25:13 2012] Failed to get F(0.3-8.0) from acisf00794/analysis//spectral/fullrun_ccd6_acisf00794_pi14-548_pass1_cl_src15_pl.csv, possibly due to different flux energy range selected
[Wed Feb 22 13:25:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 13:25:13 2012] Using Nh = 8.8e+12, photon index=1.53, rate=0.00769, arf fullrun_ccd6_acisf00794_pi14-548_pass1_cl_src15.arf
[Wed Feb 22 13:25:13 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 22 13:25:13 2012] Updating source flux to 9.3e-14