[Tue Sep 27 20:41:22 2011] Detection parameters:
  Position = (452.9, 579.9) = 8 22 26.26 20 58 58.9
  Extent = 0.5" x 0.5", rotation angle = 49 degrees
  Source counts = 83.4 +/- 9.2
  Background counts = 1.6
  Rate = 0.003 +/- 0.0003

[Tue Sep 27 20:41:24 2011] Off-axis axis estimate = 4.79'
[Tue Sep 27 20:42:20 2011] Using EEF radius (= 1.10 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 20:42:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 20:42:20 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Tue Sep 27 20:42:20 2011] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.209
[Tue Sep 27 20:42:20 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.10"
[Tue Sep 27 20:42:21 2011] fullrun_ccd3_acisf07932_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 20:42:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07932_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 20:42:21 2011] fullrun_ccd3_acisf07932_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 20:42:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07932_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 20:42:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07932_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07932_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 20:42:21 2011] fullrun_ccd3_acisf07932_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 20:42:21 2011] fullrun_ccd3_acisf07932_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 20:42:21 2011] Fit fullrun_ccd3_acisf07932_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 20:42:31 2011] Spatial fit model total counts = 86.018700, observed total counts = 89.000000
[Tue Sep 27 20:42:31 2011] Offset between fit and detection position for source 1 = 0.850153 pixels
[Tue Sep 27 20:42:31 2011] 85.413280 total counts/ 5.027680 bgd. counts: snr = 35.850436
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.850153 pixels
  Position = (453.5, 580.5) = 8 22 26.26 20 58 59.0
  Extent = 0.8 (0.6-0.9)", rotation angle = 0
  Source counts = 80.4 +/- 9.2
  Background counts = 5.0
  Rate = 0.003 +/- 0.0003
[Tue Sep 27 20:42:31 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 20:42:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 20:42:31 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 20:42:31 2011] Source does appear to be extended
[Tue Sep 27 20:42:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 20:42:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 20:42:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 20:42:53 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Tue Sep 27 20:42:53 2011] source mask rpix=1.6, npix_max = 16, mask sum = 25, frac = 1.477
[Tue Sep 27 20:42:53 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.77"
[Tue Sep 27 20:42:53 2011] fullrun_ccd3_acisf07932_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 20:42:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07932_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 20:42:53 2011] fullrun_ccd3_acisf07932_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 20:42:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07932_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 20:42:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07932_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07932_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 20:42:53 2011] fullrun_ccd3_acisf07932_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 20:42:54 2011] fullrun_ccd3_acisf07932_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 20:42:54 2011] Fit fullrun_ccd3_acisf07932_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 20:43:04 2011] Spatial fit model total counts = 88.568600, observed total counts = 89.000000
[Tue Sep 27 20:43:04 2011] Offset between fit and detection position for source 1 = 0.046865 pixels
[Tue Sep 27 20:43:04 2011] 87.556440 total counts/ 5.705040 bgd. counts: snr = 34.268632
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.046865 pixels
  Position = (453.5, 580.6) = 8 22 26.26 20 58 59.0
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 81.9 +/- 9.4
  Background counts = 5.7
  Rate = 0.003 +/- 0.0003
[Tue Sep 27 20:43:04 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 20:43:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 20:43:04 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 20:43:04 2011] Source does appear to be extended
[Tue Sep 27 20:43:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 20:45:54 2011] Not overwriting source region fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1_src.reg
[Tue Sep 27 20:45:54 2011] Extracting stamp from image fullrun_ccd3_acisf07932_pi14-548_cl_sm2.00.img.gz, (419, 546) - (488, 615)
[Tue Sep 27 20:45:54 2011] Writing fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1.gif
[Tue Sep 27 20:45:56 2011] ../../acisf07932/products/events/fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1_src.evt and ../../acisf07932/products/events/fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Sep 27 20:45:56 2011] Size of ../../acisf07932/products/events/fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1_src.evt.gz[events] = 85 counts
[Tue Sep 27 20:45:56 2011] Mean chipx,y = (647.67, 521.40)
[Tue Sep 27 20:45:56 2011] Mean tdetx,y = (4610.60, 3708.67)
[Tue Sep 27 20:45:56 2011] chipx,y range = (630.00-667.00, 505.00-543.00)
[Tue Sep 27 20:45:56 2011] Size of ../../acisf07932/products/events/fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 11 counts
[Tue Sep 27 20:45:56 2011] ../../acisf07932/products/images/fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1_src.img and ../../acisf07932/products/images/fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Sep 27 20:45:56 2011] ../../acisf07932/products/spectra/fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1_src.pi and ../../acisf07932/products/spectra/fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Sep 27 20:45:56 2011] Not generating rmf since there are only 81 counts
[Tue Sep 27 20:45:58 2011] ../../acisf07932/products/lightcurves/fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1_src.lc and ../../acisf07932/products/lightcurves/fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Sep 27 20:47:03 2011] 184.815
[Tue Sep 27 20:47:07 2011] Updating aperture counts using extracted products
[Tue Sep 27 20:47:07 2011] Error reading totcts from fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Sep 27 20:47:08 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 20:47:08 2011] Using photon index=1.80, rate=0.00277, arf fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 20:47:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 20:47:08 2011] Updating source flux to 3.4e-14
[Tue Sep 27 20:47:18 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep 27 20:47:19 2011] acisf07932/analysis//spectral/fullrun_ccd3_acisf07932_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete