[Tue Sep 27 20:41:17 2011] Detection parameters:
  Position = (943.4, 352.5) = 8 22 15.97 21 5 36.2
  Extent = 1.4" x 1.0", rotation angle = 111 degrees
  Source counts = 316.0 +/- 18.3
  Background counts = 18.0
  Rate = 0.01 +/- 0.0006

[Tue Sep 27 20:41:21 2011] Off-axis axis estimate = 6.37'
[Tue Sep 27 20:42:19 2011] Using EEF radius (= 1.82 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 20:42:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 20:42:19 2011] Initial guess for spatial extent in simple fitting = 1.82"
[Tue Sep 27 20:42:19 2011] source mask rpix=3.7, npix_max = 70, mask sum = 81, frac = 1.148
[Tue Sep 27 20:42:19 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.82"
[Tue Sep 27 20:42:20 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass0_src1.ximg exists
[Tue Sep 27 20:42:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07932_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 20:42:20 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Sep 27 20:42:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07932_pi14-548_cl_pass0_src1.csv
[Tue Sep 27 20:42:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07932_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07932_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 20:42:20 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Sep 27 20:42:20 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Sep 27 20:42:20 2011] Fit fullrun_ccd2_acisf07932_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Sep 27 20:42:29 2011] Spatial fit model total counts = 334.754000, observed total counts = 333.000000
[Tue Sep 27 20:42:29 2011] Offset between fit and detection position for source 2 = 0.637714 pixels
[Tue Sep 27 20:42:29 2011] 334.827300 total counts/ 54.777300 bgd. counts: snr = 37.838618
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.637714 pixels
  Position = (944.0, 352.8) = 8 22 15.96 21 5 36.1
  Extent = 1.6 (1.5-1.8)", rotation angle = 0
  Source counts = 280.1 +/- 18.3
  Background counts = 54.8
  Rate = 0.009 +/- 0.0006
[Tue Sep 27 20:42:29 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 20:42:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 20:42:29 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 20:42:29 2011] Source does appear to be extended
[Tue Sep 27 20:42:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 20:42:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 20:42:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 20:42:52 2011] Initial guess for spatial extent in simple fitting = 1.63"
[Tue Sep 27 20:42:52 2011] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.102
[Tue Sep 27 20:42:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.63"
[Tue Sep 27 20:42:52 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass1_src1.ximg exists
[Tue Sep 27 20:42:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07932_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 20:42:52 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Sep 27 20:42:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07932_pi14-548_cl_pass1_src1.csv
[Tue Sep 27 20:42:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07932_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07932_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 20:42:53 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep 27 20:42:53 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep 27 20:42:53 2011] Fit fullrun_ccd2_acisf07932_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep 27 20:43:02 2011] Spatial fit model total counts = 331.777000, observed total counts = 330.000000
[Tue Sep 27 20:43:02 2011] Offset between fit and detection position for source 2 = 0.119794 pixels
[Tue Sep 27 20:43:02 2011] 331.487500 total counts/ 67.226500 bgd. counts: snr = 32.230187
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.119794 pixels
  Position = (944.1, 352.7) = 8 22 15.96 21 5 36.1
  Extent = 1.5 (1.4-1.7)", rotation angle = 0
  Source counts = 264.3 +/- 18.2
  Background counts = 67.2
  Rate = 0.009 +/- 0.0006
[Tue Sep 27 20:43:02 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 20:43:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 20:43:02 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 20:43:02 2011] Source does appear to be extended
[Tue Sep 27 20:43:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 20:45:20 2011] Not overwriting source region fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_src.reg
[Tue Sep 27 20:45:20 2011] Extracting stamp from image fullrun_ccd2_acisf07932_pi14-548_cl_sm2.00.img.gz, (875, 283) - (1014, 422)
[Tue Sep 27 20:45:20 2011] Writing fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2.gif
[Tue Sep 27 20:45:20 2011] ../../acisf07932/products/events/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_src.evt and ../../acisf07932/products/events/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Sep 27 20:45:20 2011] Size of ../../acisf07932/products/events/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_src.evt.gz[events] = 318 counts
[Tue Sep 27 20:45:20 2011] Mean chipx,y = (806.76, 800.37)
[Tue Sep 27 20:45:20 2011] Mean tdetx,y = (3861.37, 3279.24)
[Tue Sep 27 20:45:20 2011] chipx,y range = (782.00-831.00, 776.00-827.00)
[Tue Sep 27 20:45:20 2011] Size of ../../acisf07932/products/events/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 71 counts
[Tue Sep 27 20:45:20 2011] ../../acisf07932/products/images/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_src.img and ../../acisf07932/products/images/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Sep 27 20:45:20 2011] ../../acisf07932/products/spectra/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_src.pi and ../../acisf07932/products/spectra/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Sep 27 20:45:23 2011] ../../acisf07932/products/lightcurves/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_src.lc and ../../acisf07932/products/lightcurves/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Sep 27 20:45:54 2011] Keeping rmf generated by specextract
[Tue Sep 27 20:45:54 2011] 175.368
[Tue Sep 27 20:47:07 2011] Updating aperture counts using extracted products
[Tue Sep 27 20:47:07 2011] Error reading totcts from fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Sep 27 20:47:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 20:47:07 2011] Using photon index=1.80, rate=0.00893, arf fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2.arf
[Tue Sep 27 20:47:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 20:47:07 2011] Updating source flux to 1.2e-13
[Tue Sep 27 20:47:18 2011] Reading fit data from acisf07932/analysis//spectral/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_pl.csv
[Tue Sep 27 20:47:18 2011] Spectral fit parameter nH value = 1.01728e+19
[Tue Sep 27 20:47:18 2011] Spectral fit parameter PhoIndex value = 2.02124
[Tue Sep 27 20:47:18 2011] Failed to get F(0.3-8.0) from acisf07932/analysis//spectral/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 20:47:18 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 20:47:18 2011] Using Nh = 1e+19, photon index=2.02, rate=0.00893, arf fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src2.arf
[Tue Sep 27 20:47:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 20:47:18 2011] Updating source flux to 1.2e-13