[Tue Sep 27 20:41:21 2011] Detection parameters:
  Position = (274.0, 744.3) = 8 22 39.50 21 8 49.1
  Extent = 1.6" x 0.9", rotation angle = 168 degrees
  Source counts = 21.7 +/- 5.0
  Background counts = 3.3
  Rate = 0.0007 +/- 0.0002

[Tue Sep 27 20:41:21 2011] Off-axis axis estimate = 6.27'
[Tue Sep 27 20:42:19 2011] Using EEF radius (= 1.77 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 20:42:19 2011] Initial guess for spatial extent in simple fitting = 1.77"
[Tue Sep 27 20:42:19 2011] source mask rpix=3.6, npix_max = 67, mask sum = 56, frac = 0.836
[Tue Sep 27 20:42:19 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.77"
[Tue Sep 27 20:42:20 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass0_src6.ximg exists
[Tue Sep 27 20:42:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07932_pi14-548_cl_pass0_src6.csv
[Tue Sep 27 20:42:20 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass0_src6_1.ximg exists
[Tue Sep 27 20:42:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07932_pi14-548_cl_pass0_src6.csv
[Tue Sep 27 20:42:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07932_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07932_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 20:42:20 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Tue Sep 27 20:42:20 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Sep 27 20:42:20 2011] Fit fullrun_ccd2_acisf07932_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Sep 27 20:42:29 2011] Spatial fit model total counts = 25.406600, observed total counts = 29.000000
[Tue Sep 27 20:42:29 2011] Offset between fit and detection position for source 15 = 0.716477 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.716477 pixels
  Position = (273.5, 744.8) = 8 22 39.54 21 8 49.1
  Extent = 2.4 (2.1-3.5)" x 0.9 (0.7-1.3)", rotation angle = 200 (189-214) degrees
  Source counts = 26.5 +/- 5.1
  Background counts = -0.0
  Rate = 0.0009 +/- 0.0002
[Tue Sep 27 20:42:29 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 20:42:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 20:42:29 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 20:42:29 2011] Source does appear to be extended
[Tue Sep 27 20:42:29 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.57
[Tue Sep 27 20:42:29 2011] Source is asymmetric
[Tue Sep 27 20:42:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 20:42:52 2011] Initial guess for spatial extent in simple fitting = 1.66"
[Tue Sep 27 20:42:52 2011] source mask rpix=3.4, npix_max = 60, mask sum = 51, frac = 0.847
[Tue Sep 27 20:42:52 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 1.66"
[Tue Sep 27 20:42:53 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass1_src6.ximg exists
[Tue Sep 27 20:42:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07932_pi14-548_cl_pass1_src6.csv
[Tue Sep 27 20:42:53 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass1_src6_1.ximg exists
[Tue Sep 27 20:42:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07932_pi14-548_cl_pass1_src6.csv
[Tue Sep 27 20:42:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07932_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07932_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 20:42:53 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Tue Sep 27 20:42:53 2011] fullrun_ccd2_acisf07932_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Sep 27 20:42:53 2011] Fit fullrun_ccd2_acisf07932_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Sep 27 20:43:02 2011] Spatial fit model total counts = 26.719500, observed total counts = 27.000000
[Tue Sep 27 20:43:02 2011] Offset between fit and detection position for source 15 = 1.326947 pixels
[Tue Sep 27 20:43:02 2011] 27.681410 total counts/ 7.285310 bgd. counts: snr = 7.556542
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.326947 pixels
  Position = (274.6, 744.1) = 8 22 39.50 21 8 48.8
  Extent = 1.1 (0.6-1.4)", rotation angle = 0
  Source counts = 20.4 +/- 5.3
  Background counts = 7.3
  Rate = 0.0007 +/- 0.0002
[Tue Sep 27 20:43:02 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 20:43:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 20:43:02 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 20:43:02 2011] Source does appear to be extended
[Tue Sep 27 20:43:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 20:45:20 2011] Not overwriting source region fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15_src.reg
[Tue Sep 27 20:45:20 2011] Extracting stamp from image fullrun_ccd2_acisf07932_pi14-548_cl_sm2.00.img.gz, (223, 693) - (326, 796)
[Tue Sep 27 20:45:20 2011] Writing fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15.gif
[Tue Sep 27 20:45:34 2011] ../../acisf07932/products/events/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15_src.evt and ../../acisf07932/products/events/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Tue Sep 27 20:45:34 2011] Size of ../../acisf07932/products/events/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15_src.evt.gz[events] = 25 counts
[Tue Sep 27 20:45:34 2011] Mean chipx,y = (216.72, 295.04)
[Tue Sep 27 20:45:34 2011] Mean tdetx,y = (3356.04, 3869.28)
[Tue Sep 27 20:45:34 2011] chipx,y range = (198.00-235.00, 277.00-316.00)
[Tue Sep 27 20:45:34 2011] Size of ../../acisf07932/products/events/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 31 counts
[Tue Sep 27 20:45:34 2011] ../../acisf07932/products/images/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15_src.img and ../../acisf07932/products/images/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Tue Sep 27 20:45:34 2011] ../../acisf07932/products/spectra/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15_src.pi and ../../acisf07932/products/spectra/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Tue Sep 27 20:45:34 2011] Not generating rmf since there are only 20 counts
[Tue Sep 27 20:45:36 2011] ../../acisf07932/products/lightcurves/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15_src.lc and ../../acisf07932/products/lightcurves/fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Tue Sep 27 20:45:54 2011] 182.738
[Tue Sep 27 20:47:07 2011] Updating aperture counts using extracted products
[Tue Sep 27 20:47:07 2011] Error reading totcts from fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15_src.pi.gz
[Tue Sep 27 20:47:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 20:47:07 2011] Using photon index=1.80, rate=0.000689, arf fullrun_ccd2_acisf07932_pi14-548_pass1_cl_src15.arf
[Tue Sep 27 20:47:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 20:47:07 2011] Updating source flux to 8.5e-15
[Tue Sep 27 20:47:13 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting