[Tue Sep 27 20:41:14 2011] Detection parameters:
  Position = (999.7, 876.6) = 8 22 43.45 20 59 57.4
  Extent = 0.5" x 0.5", rotation angle = 10 degrees
  Source counts = 32.3 +/- 5.7
  Background counts = 0.7
  Rate = 0.001 +/- 0.0002

[Tue Sep 27 20:41:15 2011] Off-axis axis estimate = 2.72'
[Tue Sep 27 20:42:19 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 20:42:19 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Tue Sep 27 20:42:19 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.909
[Tue Sep 27 20:42:19 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.53"
[Tue Sep 27 20:42:19 2011] fullrun_ccd1_acisf07932_pi14-548_cl_pass0_src3.ximg exists
[Tue Sep 27 20:42:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07932_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 20:42:19 2011] fullrun_ccd1_acisf07932_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Sep 27 20:42:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07932_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 20:42:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07932_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07932_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 20:42:19 2011] fullrun_ccd1_acisf07932_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Sep 27 20:42:19 2011] fullrun_ccd1_acisf07932_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Sep 27 20:42:19 2011] Fit fullrun_ccd1_acisf07932_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Sep 27 20:42:28 2011] Spatial fit model total counts = 33.871100, observed total counts = 34.000000
[Tue Sep 27 20:42:28 2011] Offset between fit and detection position for source 1 = 0.829655 pixels
[Tue Sep 27 20:42:28 2011] 33.492570 total counts/ 1.446070 bgd. counts: snr = 26.649309
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.829655 pixels
  Position = (1000.3, 877.1) = 8 22 43.44 20 59 57.4
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 32.0 +/- 5.8
  Background counts = 1.4
  Rate = 0.001 +/- 0.0002
[Tue Sep 27 20:42:28 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 20:42:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 20:42:28 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 20:42:28 2011] Source does appear to be extended
[Tue Sep 27 20:42:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 20:42:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 20:42:51 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Tue Sep 27 20:42:51 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.045
[Tue Sep 27 20:42:51 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.48"
[Tue Sep 27 20:42:52 2011] fullrun_ccd1_acisf07932_pi14-548_cl_pass1_src3.ximg exists
[Tue Sep 27 20:42:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07932_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 20:42:52 2011] fullrun_ccd1_acisf07932_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Sep 27 20:42:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07932_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 20:42:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07932_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07932_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 20:42:52 2011] fullrun_ccd1_acisf07932_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Sep 27 20:42:52 2011] fullrun_ccd1_acisf07932_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Sep 27 20:42:52 2011] Fit fullrun_ccd1_acisf07932_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Sep 27 20:43:01 2011] Spatial fit model total counts = 32.484700, observed total counts = 34.000000
[Tue Sep 27 20:43:01 2011] Offset between fit and detection position for source 1 = 0.022730 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.022730 pixels
  Position = (1000.3, 877.2) = 8 22 43.44 20 59 57.4
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 31.7 +/- 5.6
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Tue Sep 27 20:43:01 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 20:43:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 20:43:01 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 20:43:01 2011] Source does appear to be extended
[Tue Sep 27 20:43:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 20:44:28 2011] Not overwriting source region fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1_src.reg
[Tue Sep 27 20:44:28 2011] Extracting stamp from image fullrun_ccd1_acisf07932_pi14-548_cl_sm2.00.img.gz, (979, 856) - (1022, 899)
[Tue Sep 27 20:44:28 2011] Writing fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1.gif
[Tue Sep 27 20:44:34 2011] ../../acisf07932/products/events/fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1_src.evt and ../../acisf07932/products/events/fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Sep 27 20:44:34 2011] Size of ../../acisf07932/products/events/fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1_src.evt.gz[events] = 32 counts
[Tue Sep 27 20:44:34 2011] Mean chipx,y = (65.66, 727.28)
[Tue Sep 27 20:44:34 2011] Mean tdetx,y = (4404.72, 4172.66)
[Tue Sep 27 20:44:34 2011] chipx,y range = (47.00-80.00, 711.00-746.00)
[Tue Sep 27 20:44:34 2011] Size of ../../acisf07932/products/events/fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 6 counts
[Tue Sep 27 20:44:34 2011] ../../acisf07932/products/images/fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1_src.img and ../../acisf07932/products/images/fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Sep 27 20:44:34 2011] ../../acisf07932/products/spectra/fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1_src.pi and ../../acisf07932/products/spectra/fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Sep 27 20:44:34 2011] Not generating rmf since there are only 31 counts
[Tue Sep 27 20:44:36 2011] ../../acisf07932/products/lightcurves/fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1_src.lc and ../../acisf07932/products/lightcurves/fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Sep 27 20:45:19 2011] 198.964
[Tue Sep 27 20:47:07 2011] Updating aperture counts using extracted products
[Tue Sep 27 20:47:07 2011] Error reading totcts from fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Sep 27 20:47:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 20:47:07 2011] Using photon index=1.80, rate=0.00107, arf fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1.arf
[Tue Sep 27 20:47:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 20:47:07 2011] Updating source flux to 1.2e-14
[Tue Sep 27 20:47:12 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep 27 20:47:13 2011] acisf07932/analysis//spectral/fullrun_ccd1_acisf07932_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete