[Tue Mar 13 10:26:31 2012] Detection parameters:
  Position = (961.1, 1151.3) = 13 37 19.80 -29 53 48.8
  Extent = 0.6" x 0.5", rotation angle = 58 degrees
  Source counts = 2517.9 +/- 50.3
  Background counts = 14.1
  Rate = 0.05 +/- 0.001

[Tue Mar 13 10:26:34 2012] Off-axis axis estimate = 2.69'
[Tue Mar 13 10:28:00 2012] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:28:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 10:28:00 2012] Initial guess for spatial extent in simple fitting = 0.52"
[Tue Mar 13 10:28:00 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.921
[Tue Mar 13 10:28:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.52"
[Tue Mar 13 10:28:01 2012] fullrun_ccd6_acisf00793_pi14-548_cl_pass0_src1.ximg exists
[Tue Mar 13 10:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00793_pi14-548_cl_pass0_src1.csv
[Tue Mar 13 10:28:01 2012] fullrun_ccd6_acisf00793_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Mar 13 10:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00793_pi14-548_cl_pass0_src1.csv
[Tue Mar 13 10:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00793_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00793_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:28:01 2012] fullrun_ccd6_acisf00793_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 10:28:01 2012] fullrun_ccd6_acisf00793_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 10:28:01 2012] Fit fullrun_ccd6_acisf00793_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 10:28:22 2012] Spatial fit model total counts = 2525.370000, observed total counts = 2528.000000
[Tue Mar 13 10:28:22 2012] Offset between fit and detection position for source 1 = 0.699208 pixels
[Tue Mar 13 10:28:22 2012] 2526.664000 total counts/ 54.034000 bgd. counts: snr = 336.376444
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.699208 pixels
  Position = (961.6, 1151.8) = 13 37 19.80 -29 53 48.8
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 2472.6 +/- 50.3
  Background counts = 54.0
  Rate = 0.05 +/- 0.001
[Tue Mar 13 10:28:22 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:28:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:28:22 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:28:22 2012] Source does appear to be extended
[Tue Mar 13 10:28:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:29:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:29:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 10:29:03 2012] Initial guess for spatial extent in simple fitting = 0.64"
[Tue Mar 13 10:29:03 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.935
[Tue Mar 13 10:29:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.64"
[Tue Mar 13 10:29:03 2012] fullrun_ccd6_acisf00793_pi14-548_cl_pass1_src1.ximg exists
[Tue Mar 13 10:29:03 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf00793_pi14-548_cl_pass1_src1.csv
[Tue Mar 13 10:29:03 2012] fullrun_ccd6_acisf00793_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Mar 13 10:29:03 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf00793_pi14-548_cl_pass1_src1.csv
[Tue Mar 13 10:29:03 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00793_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00793_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:29:04 2012] fullrun_ccd6_acisf00793_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 13 10:29:04 2012] fullrun_ccd6_acisf00793_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 13 10:29:04 2012] Fit fullrun_ccd6_acisf00793_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 13 10:29:22 2012] Spatial fit model total counts = 2525.000000, observed total counts = 2528.000000
[Tue Mar 13 10:29:22 2012] Offset between fit and detection position for source 1 = 0.000007 pixels
[Tue Mar 13 10:29:22 2012] 2526.296100 total counts/ 53.986100 bgd. counts: snr = 336.482086
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000007 pixels
  Position = (961.6, 1151.8) = 13 37 19.80 -29 53 48.8
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 2472.3 +/- 50.3
  Background counts = 54.0
  Rate = 0.05 +/- 0.001
[Tue Mar 13 10:29:22 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:29:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:29:22 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:29:22 2012] Source does appear to be extended
[Tue Mar 13 10:29:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:31:33 2012] Not overwriting source region fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_src.reg
[Tue Mar 13 10:31:33 2012] Extracting stamp from image fullrun_ccd6_acisf00793_pi14-548_cl_sm2.00.img.gz, (933, 1123) - (991, 1181)
[Tue Mar 13 10:31:33 2012] Writing fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1.gif
[Tue Mar 13 10:31:35 2012] ../../acisf00793/products/events/fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_src.evt and ../../acisf00793/products/events/fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Mar 13 10:31:35 2012] Size of ../../acisf00793/products/events/fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_src.evt.gz[events] = 2497 counts
[Tue Mar 13 10:31:35 2012] Mean chipx,y = (982.39, 353.71)
[Tue Mar 13 10:31:35 2012] Mean tdetx,y = (3857.39, 2055.71)
[Tue Mar 13 10:31:35 2012] chipx,y range = (962.00-1001.00, 334.00-373.00)
[Tue Mar 13 10:31:35 2012] Size of ../../acisf00793/products/events/fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 49 counts
[Tue Mar 13 10:31:35 2012] ../../acisf00793/products/images/fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_src.img and ../../acisf00793/products/images/fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Mar 13 10:31:35 2012] ../../acisf00793/products/spectra/fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_src.pi and ../../acisf00793/products/spectra/fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Mar 13 10:31:38 2012] ../../acisf00793/products/lightcurves/fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_src.lc and ../../acisf00793/products/lightcurves/fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Mar 13 10:33:03 2012] Keeping rmf generated by specextract
[Tue Mar 13 10:33:03 2012] 214.902
[Tue Mar 13 10:37:16 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:37:16 2012] Error reading totcts from fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Mar 13 10:37:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:37:16 2012] Using photon index=1.80, rate=0.0485, arf fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1.arf
[Tue Mar 13 10:37:16 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 10:37:16 2012] Updating source flux to 4.4e-13
[Tue Mar 13 10:38:02 2012] Reading fit data from acisf00793/analysis//spectral/fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_pl.csv
[Tue Mar 13 10:38:02 2012] Spectral fit parameter nH value = 1.85944e+21
[Tue Mar 13 10:38:02 2012] Spectral fit parameter PhoIndex value = 2.46402
[Tue Mar 13 10:38:02 2012] Failed to get F(0.3-8.0) from acisf00793/analysis//spectral/fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 10:38:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:38:02 2012] Using Nh = 1.9e+21, photon index=2.46, rate=0.0485, arf fullrun_ccd6_acisf00793_pi14-548_pass1_cl_src1.arf
[Tue Mar 13 10:38:02 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 10:38:02 2012] Updating source flux to 3.5e-13