[Fri Oct 28 03:37:13 2011] Detection parameters:
  Position = (409.4, 552.0) = 0 56 16.19 -1 20 4.5
  Extent = 1.2" x 0.6", rotation angle = 19 degrees
  Source counts = 39.2 +/- 6.9
  Background counts = 7.8
  Rate = 0.0009 +/- 0.0002

[Fri Oct 28 03:37:15 2011] Off-axis axis estimate = 5.68'
[Fri Oct 28 03:38:42 2011] Using EEF radius (= 1.48 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 03:38:42 2011] Initial guess for spatial extent in simple fitting = 1.48"
[Fri Oct 28 03:38:42 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.999
[Fri Oct 28 03:38:42 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 1.48"
[Fri Oct 28 03:38:43 2011] fullrun_ccd3_acisf07918_pi14-548_cl_pass0_src13.ximg exists
[Fri Oct 28 03:38:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07918_pi14-548_cl_pass0_src13.csv
[Fri Oct 28 03:38:43 2011] fullrun_ccd3_acisf07918_pi14-548_cl_pass0_src13_1.ximg exists
[Fri Oct 28 03:38:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07918_pi14-548_cl_pass0_src13.csv
[Fri Oct 28 03:38:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07918_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07918_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 03:38:43 2011] fullrun_ccd3_acisf07918_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Fri Oct 28 03:38:43 2011] fullrun_ccd3_acisf07918_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Oct 28 03:38:43 2011] Fit fullrun_ccd3_acisf07918_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Oct 28 03:38:57 2011] Spatial fit model total counts = 60.999600, observed total counts = 61.000000
[Fri Oct 28 03:38:57 2011] Offset between fit and detection position for source 5 = 0.787029 pixels
[Fri Oct 28 03:38:57 2011] 61.287600 total counts/ 30.208800 bgd. counts: snr = 5.654543
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.787029 pixels
  Position = (410.0, 552.5) = 0 56 16.18 -1 20 4.5
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 31.1 +/- 7.8
  Background counts = 30.2
  Rate = 0.0007 +/- 0.0002
[Fri Oct 28 03:38:57 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 03:38:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 03:38:57 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 03:38:57 2011] Source does appear to be extended
[Fri Oct 28 03:38:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 03:39:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 03:39:20 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Fri Oct 28 03:39:20 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.958
[Fri Oct 28 03:39:20 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.88"
[Fri Oct 28 03:39:21 2011] fullrun_ccd3_acisf07918_pi14-548_cl_pass1_src13.ximg exists
[Fri Oct 28 03:39:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07918_pi14-548_cl_pass1_src13.csv
[Fri Oct 28 03:39:21 2011] fullrun_ccd3_acisf07918_pi14-548_cl_pass1_src13_1.ximg exists
[Fri Oct 28 03:39:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07918_pi14-548_cl_pass1_src13.csv
[Fri Oct 28 03:39:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07918_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07918_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 03:39:21 2011] fullrun_ccd3_acisf07918_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Fri Oct 28 03:39:21 2011] fullrun_ccd3_acisf07918_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Oct 28 03:39:21 2011] Fit fullrun_ccd3_acisf07918_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Oct 28 03:39:36 2011] Spatial fit model total counts = 54.999600, observed total counts = 55.000000
[Fri Oct 28 03:39:36 2011] Offset between fit and detection position for source 5 = 0.025709 pixels
[Fri Oct 28 03:39:36 2011] 55.392400 total counts/ 23.732900 bgd. counts: snr = 6.498732
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.025709 pixels
  Position = (410.0, 552.5) = 0 56 16.19 -1 20 4.5
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 31.7 +/- 7.4
  Background counts = 23.7
  Rate = 0.0007 +/- 0.0002
[Fri Oct 28 03:39:36 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 03:39:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 03:39:36 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 03:39:36 2011] Source does appear to be extended
[Fri Oct 28 03:39:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 03:42:10 2011] Not overwriting source region fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5_src.reg
[Fri Oct 28 03:42:10 2011] Extracting stamp from image fullrun_ccd3_acisf07918_pi14-548_cl_sm2.00.img.gz, (369, 511) - (451, 594)
[Fri Oct 28 03:42:10 2011] Writing fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5.gif
[Fri Oct 28 03:42:45 2011] ../../acisf07918/products/events/fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5_src.evt and ../../acisf07918/products/events/fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Oct 28 03:42:45 2011] Size of ../../acisf07918/products/events/fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5_src.evt.gz[events] = 49 counts
[Fri Oct 28 03:42:45 2011] Mean chipx,y = (714.47, 374.76)
[Fri Oct 28 03:42:45 2011] Mean tdetx,y = (4757.24, 3775.47)
[Fri Oct 28 03:42:45 2011] chipx,y range = (696.00-737.00, 352.00-392.00)
[Fri Oct 28 03:42:45 2011] Size of ../../acisf07918/products/events/fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 115 counts
[Fri Oct 28 03:42:45 2011] ../../acisf07918/products/images/fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5_src.img and ../../acisf07918/products/images/fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Oct 28 03:42:45 2011] ../../acisf07918/products/spectra/fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5_src.pi and ../../acisf07918/products/spectra/fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Oct 28 03:42:45 2011] Not generating rmf since there are only 31 counts
[Fri Oct 28 03:42:47 2011] ../../acisf07918/products/lightcurves/fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5_src.lc and ../../acisf07918/products/lightcurves/fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Oct 28 03:43:31 2011] 181.167
[Fri Oct 28 03:43:38 2011] Updating aperture counts using extracted products
[Fri Oct 28 03:43:38 2011] Error reading totcts from fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Oct 28 03:43:39 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 03:43:39 2011] Using photon index=1.80, rate=0.000703, arf fullrun_ccd3_acisf07918_pi14-548_pass1_cl_src5.arf
[Fri Oct 28 03:43:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 03:43:39 2011] Updating source flux to 8.9e-15
[Fri Oct 28 03:43:49 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting