[Wed Sep 21 22:31:21 2011] Detection parameters:
  Position = (832.5, 760.4) = 8 40 58.89 32 33 25.8
  Extent = 2.1" x 1.6", rotation angle = 116 degrees
  Source counts = 338.7 +/- 19.6
  Background counts = 47.3
  Rate = 0.006 +/- 0.0003

[Wed Sep 21 22:31:22 2011] Off-axis axis estimate = 7.76'
[Wed Sep 21 22:32:34 2011] Using EEF radius (= 2.66 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 22:32:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 22:32:34 2011] Initial guess for spatial extent in simple fitting = 2.66"
[Wed Sep 21 22:32:34 2011] source mask rpix=5.4, npix_max = 139, mask sum = 132, frac = 0.945
[Wed Sep 21 22:32:34 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.66"
[Wed Sep 21 22:32:35 2011] fullrun_ccd6_acisf07917_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 22:32:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07917_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 22:32:35 2011] fullrun_ccd6_acisf07917_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 22:32:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07917_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 22:32:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf07917_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf07917_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 22:32:36 2011] fullrun_ccd6_acisf07917_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 22:32:36 2011] fullrun_ccd6_acisf07917_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 22:32:36 2011] Fit fullrun_ccd6_acisf07917_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 22:33:04 2011] Spatial fit model total counts = 401.463000, observed total counts = 403.000000
[Wed Sep 21 22:33:04 2011] Offset between fit and detection position for source 1 = 0.927388 pixels
[Wed Sep 21 22:33:04 2011] 401.545800 total counts/ 47.745800 bgd. counts: snr = 51.202391
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.927388 pixels
  Position = (833.0, 761.2) = 8 40 58.89 32 33 25.9
  Extent = 3.4 (3.1-3.8)", rotation angle = 0
  Source counts = 353.8 +/- 20.0
  Background counts = 47.7
  Rate = 0.006 +/- 0.0003
[Wed Sep 21 22:33:04 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 22:33:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 22:33:04 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 22:33:04 2011] Source does appear to be extended
[Wed Sep 21 22:33:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 22:33:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 22:33:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 22:33:32 2011] Initial guess for spatial extent in simple fitting = 3.43"
[Wed Sep 21 22:33:32 2011] source mask rpix=7.0, npix_max = 223, mask sum = 225, frac = 1.005
[Wed Sep 21 22:33:32 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.43"
[Wed Sep 21 22:33:33 2011] fullrun_ccd6_acisf07917_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 22:33:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07917_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 22:33:33 2011] fullrun_ccd6_acisf07917_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 22:33:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07917_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 22:33:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf07917_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf07917_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 22:33:34 2011] fullrun_ccd6_acisf07917_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 22:33:34 2011] fullrun_ccd6_acisf07917_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 22:33:34 2011] Fit fullrun_ccd6_acisf07917_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 22:33:54 2011] Spatial fit model total counts = 425.999000, observed total counts = 426.000000
[Wed Sep 21 22:33:54 2011] Offset between fit and detection position for source 1 = 0.045219 pixels
[Wed Sep 21 22:33:54 2011] 425.889900 total counts/ 59.670900 bgd. counts: snr = 47.408867
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.045219 pixels
  Position = (833.0, 761.2) = 8 40 58.89 32 33 25.9
  Extent = 3.5 (3.2-3.8)", rotation angle = 0
  Source counts = 366.2 +/- 20.6
  Background counts = 59.7
  Rate = 0.006 +/- 0.0003
[Wed Sep 21 22:33:54 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 22:33:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 22:33:54 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 22:33:54 2011] Source does appear to be extended
[Wed Sep 21 22:33:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 22:34:50 2011] Not overwriting source region fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 21 22:34:50 2011] Extracting stamp from image fullrun_ccd6_acisf07917_pi14-548_cl_sm2.00.img.gz, (673, 601) - (993, 921)
[Wed Sep 21 22:34:50 2011] Writing fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1.gif
[Wed Sep 21 22:34:51 2011] ../../acisf07917/products/events/fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_src.evt and ../../acisf07917/products/events/fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 21 22:34:51 2011] Size of ../../acisf07917/products/events/fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_src.evt.gz[events] = 417 counts
[Wed Sep 21 22:34:51 2011] Mean chipx,y = (308.60, 297.05)
[Wed Sep 21 22:34:51 2011] Mean tdetx,y = (3183.60, 1999.05)
[Wed Sep 21 22:34:51 2011] chipx,y range = (278.00-344.00, 254.00-334.00)
[Wed Sep 21 22:34:51 2011] Size of ../../acisf07917/products/events/fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 512 counts
[Wed Sep 21 22:34:51 2011] ../../acisf07917/products/images/fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_src.img and ../../acisf07917/products/images/fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 21 22:34:51 2011] ../../acisf07917/products/spectra/fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_src.pi and ../../acisf07917/products/spectra/fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 21 22:34:54 2011] ../../acisf07917/products/lightcurves/fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_src.lc and ../../acisf07917/products/lightcurves/fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 21 22:35:44 2011] Keeping rmf generated by specextract
[Wed Sep 21 22:35:44 2011] 178.228
[Wed Sep 21 22:39:05 2011] Updating aperture counts using extracted products
[Wed Sep 21 22:39:05 2011] Error reading totcts from fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 21 22:39:05 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 22:39:05 2011] Using photon index=1.80, rate=0.00608, arf fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 22:39:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 22:39:05 2011] Updating source flux to 7.2e-14
[Wed Sep 21 22:39:28 2011] Reading fit data from acisf07917/analysis//spectral/fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 21 22:39:28 2011] Spectral fit parameter nH value = 3.59764e+14
[Wed Sep 21 22:39:28 2011] Spectral fit parameter PhoIndex value = 1.81424
[Wed Sep 21 22:39:28 2011] Failed to get F(0.3-8.0) from acisf07917/analysis//spectral/fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 22:39:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 22:39:28 2011] Using Nh = 3.6e+14, photon index=1.81, rate=0.00608, arf fullrun_ccd6_acisf07917_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 22:39:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 22:39:28 2011] Updating source flux to 7.4e-14