[Wed Sep 21 23:15:11 2011] Detection parameters:
  Position = (604.2, 296.5) = 10 52 33.83 45 49 49.5
  Extent = 0.9" x 0.6", rotation angle = 63 degrees
  Source counts = 106.1 +/- 10.4
  Background counts = 1.9
  Rate = 0.005 +/- 0.0005

[Wed Sep 21 23:15:11 2011] Off-axis axis estimate = 3.16'
[Wed Sep 21 23:16:04 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 23:16:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 23:16:04 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Wed Sep 21 23:16:04 2011] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.982
[Wed Sep 21 23:16:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.61"
[Wed Sep 21 23:16:04 2011] fullrun_ccd6_acisf07913_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 23:16:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07913_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 23:16:04 2011] fullrun_ccd6_acisf07913_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 23:16:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07913_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 23:16:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf07913_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf07913_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 23:16:05 2011] fullrun_ccd6_acisf07913_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 23:16:05 2011] fullrun_ccd6_acisf07913_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 23:16:05 2011] Fit fullrun_ccd6_acisf07913_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 23:16:13 2011] Spatial fit model total counts = 109.551000, observed total counts = 110.000000
[Wed Sep 21 23:16:13 2011] Offset between fit and detection position for source 12 = 0.831622 pixels
[Wed Sep 21 23:16:13 2011] 108.956400 total counts/ 3.485400 bgd. counts: snr = 56.494576
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.831622 pixels
  Position = (604.8, 297.0) = 10 52 33.83 45 49 49.6
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 105.5 +/- 10.4
  Background counts = 3.5
  Rate = 0.005 +/- 0.0005
[Wed Sep 21 23:16:13 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 23:16:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 23:16:13 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 23:16:13 2011] Source does appear to be extended
[Wed Sep 21 23:16:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 23:16:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 23:16:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 23:16:34 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Wed Sep 21 23:16:34 2011] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.848
[Wed Sep 21 23:16:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.95"
[Wed Sep 21 23:16:34 2011] fullrun_ccd6_acisf07913_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 23:16:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07913_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 23:16:34 2011] fullrun_ccd6_acisf07913_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 23:16:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07913_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 23:16:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf07913_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf07913_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 23:16:34 2011] fullrun_ccd6_acisf07913_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 23:16:34 2011] fullrun_ccd6_acisf07913_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 23:16:34 2011] Fit fullrun_ccd6_acisf07913_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 23:16:39 2011] Spatial fit model total counts = 108.904000, observed total counts = 110.000000
[Wed Sep 21 23:16:39 2011] Offset between fit and detection position for source 12 = 0.018904 pixels
[Wed Sep 21 23:16:39 2011] 108.636010 total counts/ 4.887010 bgd. counts: snr = 46.931270
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.018904 pixels
  Position = (604.8, 297.0) = 10 52 33.83 45 49 49.5
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 103.7 +/- 10.4
  Background counts = 4.9
  Rate = 0.005 +/- 0.0005
[Wed Sep 21 23:16:39 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 23:16:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 23:16:39 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 23:16:39 2011] Source does appear to be extended
[Wed Sep 21 23:16:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 23:17:16 2011] Not overwriting source region fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_src.reg
[Wed Sep 21 23:17:16 2011] Extracting stamp from image fullrun_ccd6_acisf07913_pi14-548_cl_sm2.00.img.gz, (562, 254) - (648, 340)
[Wed Sep 21 23:17:16 2011] Writing fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12.gif
[Wed Sep 21 23:17:18 2011] ../../acisf07913/products/events/fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_src.evt and ../../acisf07913/products/events/fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Wed Sep 21 23:17:18 2011] Size of ../../acisf07913/products/events/fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_src.evt.gz[events] = 107 counts
[Wed Sep 21 23:17:18 2011] Mean chipx,y = (894.04, 317.91)
[Wed Sep 21 23:17:18 2011] Mean tdetx,y = (3769.04, 2019.91)
[Wed Sep 21 23:17:18 2011] chipx,y range = (877.00-915.00, 301.00-337.00)
[Wed Sep 21 23:17:18 2011] Size of ../../acisf07913/products/events/fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 23 counts
[Wed Sep 21 23:17:18 2011] ../../acisf07913/products/images/fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_src.img and ../../acisf07913/products/images/fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Wed Sep 21 23:17:18 2011] ../../acisf07913/products/spectra/fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_src.pi and ../../acisf07913/products/spectra/fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Wed Sep 21 23:17:21 2011] ../../acisf07913/products/lightcurves/fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_src.lc and ../../acisf07913/products/lightcurves/fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Wed Sep 21 23:18:29 2011] Keeping rmf generated by specextract
[Wed Sep 21 23:18:29 2011] 203.475
[Wed Sep 21 23:19:48 2011] Updating aperture counts using extracted products
[Wed Sep 21 23:19:48 2011] Error reading totcts from fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_src.pi.gz
[Wed Sep 21 23:19:48 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 23:19:48 2011] Using photon index=1.80, rate=0.00534, arf fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12.arf
[Wed Sep 21 23:19:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 23:19:48 2011] Updating source flux to 5.9e-14
[Wed Sep 21 23:20:03 2011] Reading fit data from acisf07913/analysis//spectral/fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_pl.csv
[Wed Sep 21 23:20:03 2011] Spectral fit parameter nH value = 9.61172e+14
[Wed Sep 21 23:20:03 2011] Spectral fit parameter PhoIndex value = 1.89434
[Wed Sep 21 23:20:03 2011] Failed to get F(0.3-8.0) from acisf07913/analysis//spectral/fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 23:20:03 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 23:20:03 2011] Using Nh = 9.6e+14, photon index=1.89, rate=0.00534, arf fullrun_ccd6_acisf07913_pi14-548_pass1_cl_src12.arf
[Wed Sep 21 23:20:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 23:20:03 2011] Updating source flux to 5.8e-14