[Sat Oct 15 17:36:15 2011] Detection parameters:
  Position = (794.6, 193.2) = 23 19 53.46 42 59 15.1
  Extent = 2.5" x 1.8", rotation angle = 164 degrees
  Source counts = 14.4 +/- 4.8
  Background counts = 8.6
  Rate = 0.0004 +/- 0.0001

[Sat Oct 15 17:36:15 2011] Off-axis axis estimate = 8.58'
[Sat Oct 15 17:37:03 2011] Using EEF radius (= 3.26 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 17:37:03 2011] Initial guess for spatial extent in simple fitting = 3.26"
[Sat Oct 15 17:37:03 2011] source mask rpix=6.6, npix_max = 202, mask sum = 196, frac = 0.967
[Sat Oct 15 17:37:03 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 3.26"
[Sat Oct 15 17:37:03 2011] fullrun_ccd3_acisf07895_pi14-548_cl_pass0_src5.ximg exists
[Sat Oct 15 17:37:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07895_pi14-548_cl_pass0_src5.csv
[Sat Oct 15 17:37:03 2011] fullrun_ccd3_acisf07895_pi14-548_cl_pass0_src5_1.ximg exists
[Sat Oct 15 17:37:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07895_pi14-548_cl_pass0_src5.csv
[Sat Oct 15 17:37:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07895_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07895_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 17:37:04 2011] fullrun_ccd3_acisf07895_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sat Oct 15 17:37:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07895_pi14-548_cl_pass0_tfrozen_src5.csv
[Sat Oct 15 17:37:04 2011] fullrun_ccd3_acisf07895_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Oct 15 17:37:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07895_pi14-548_cl_pass0_tfrozen_src5.csv
[Sat Oct 15 17:37:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07895_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07895_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 17:37:11 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 37.601427 pixels away
[Sat Oct 15 17:37:11 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 17:37:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 17:37:11 2011] Assessing source extent using major
[Sat Oct 15 17:37:11 2011] Source does appear to be extended
[Sat Oct 15 17:37:11 2011] Computing asymmetry using major and minor axis, asym = 1.44
[Sat Oct 15 17:37:11 2011] Deleting source due to low Poisson probability 0.9