[Wed Oct 19 04:27:39 2011] Detection parameters:
  Position = (1085.1, 863.3) = 10 0 32.26 55 36 31.0
  Extent = 0.7" x 0.5", rotation angle = 57 degrees
  Source counts = 131.3 +/- 11.5
  Background counts = 0.7
  Rate = 0.03 +/- 0.002

[Wed Oct 19 04:27:39 2011] Off-axis axis estimate = 2.96'
[Wed Oct 19 04:28:06 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 04:28:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 04:28:06 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Wed Oct 19 04:28:06 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.085
[Wed Oct 19 04:28:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.57"
[Wed Oct 19 04:28:06 2011] fullrun_ccd7_acisf07851_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 19 04:28:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07851_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 04:28:06 2011] fullrun_ccd7_acisf07851_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 19 04:28:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07851_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 04:28:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf07851_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf07851_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 04:28:06 2011] fullrun_ccd7_acisf07851_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 19 04:28:06 2011] fullrun_ccd7_acisf07851_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 19 04:28:06 2011] Fit fullrun_ccd7_acisf07851_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 19 04:28:10 2011] Source 2 is offset by 4.794795 and 3.984004 pixels which is larger than
2 X fitted extent = 0.581346 x 0.581346, not incorporating fit results
[Wed Oct 19 04:28:10 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 04:28:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 04:28:10 2011] Assessing source extent using major
[Wed Oct 19 04:28:10 2011] Source does appear to be extended
[Wed Oct 19 04:28:10 2011] Computing asymmetry using major and minor axis, asym = 1.49
[Wed Oct 19 04:28:21 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 04:28:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 04:28:21 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Wed Oct 19 04:28:21 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.085
[Wed Oct 19 04:28:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.57"
[Wed Oct 19 04:28:22 2011] fullrun_ccd7_acisf07851_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 19 04:28:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07851_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 04:28:22 2011] fullrun_ccd7_acisf07851_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 19 04:28:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07851_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 04:28:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf07851_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf07851_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 04:28:22 2011] fullrun_ccd7_acisf07851_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 19 04:28:22 2011] fullrun_ccd7_acisf07851_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 19 04:28:22 2011] Fit fullrun_ccd7_acisf07851_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 19 04:28:25 2011] Spatial fit model total counts = 129.720000, observed total counts = 133.000000
[Wed Oct 19 04:28:25 2011] Offset between fit and detection position for source 2 = 0.653586 pixels
[Wed Oct 19 04:28:25 2011] 129.761800 total counts/ 4.239800 bgd. counts: snr = 60.960310
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.653586 pixels
  Position = (1085.6, 863.8) = 10 0 32.26 55 36 30.9
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 125.5 +/- 11.4
  Background counts = 4.2
  Rate = 0.03 +/- 0.002
[Wed Oct 19 04:28:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 04:28:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 04:28:25 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 04:28:25 2011] Source does appear to be extended
[Wed Oct 19 04:28:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 04:29:07 2011] Not overwriting source region fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_src.reg
[Wed Oct 19 04:29:07 2011] Extracting stamp from image fullrun_ccd7_acisf07851_pi14-548_cl_sm2.00.img.gz, (1053, 831) - (1118, 896)
[Wed Oct 19 04:29:07 2011] Writing fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2.gif
[Wed Oct 19 04:29:07 2011] ../../acisf07851/products/events/fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_src.evt and ../../acisf07851/products/events/fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Oct 19 04:29:07 2011] Size of ../../acisf07851/products/events/fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_src.evt.gz[events] = 131 counts
[Wed Oct 19 04:29:07 2011] Mean chipx,y = (168.40, 144.18)
[Wed Oct 19 04:29:07 2011] Mean tdetx,y = (4085.40, 1846.18)
[Wed Oct 19 04:29:07 2011] chipx,y range = (150.00-188.00, 123.00-159.00)
[Wed Oct 19 04:29:07 2011] Size of ../../acisf07851/products/events/fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 6 counts
[Wed Oct 19 04:29:07 2011] ../../acisf07851/products/images/fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_src.img and ../../acisf07851/products/images/fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Oct 19 04:29:07 2011] ../../acisf07851/products/spectra/fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_src.pi and ../../acisf07851/products/spectra/fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Oct 19 04:29:10 2011] ../../acisf07851/products/lightcurves/fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_src.lc and ../../acisf07851/products/lightcurves/fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Oct 19 04:29:33 2011] Keeping rmf generated by specextract
[Wed Oct 19 04:29:33 2011] 225.809
[Wed Oct 19 04:29:35 2011] Updating aperture counts using extracted products
[Wed Oct 19 04:29:35 2011] Error reading totcts from fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct 19 04:29:35 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 04:29:35 2011] Using photon index=1.80, rate=0.0268, arf fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2.arf
[Wed Oct 19 04:29:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 04:29:35 2011] Updating source flux to 2.1e-13
[Wed Oct 19 04:29:40 2011] Flag b found in src. 2 procflags, skipping spectral fitting
[Wed Oct 19 04:29:43 2011] Reading fit data from acisf07851/analysis//spectral/fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_pl.csv
[Wed Oct 19 04:29:43 2011] Spectral fit parameter nH value = 8.75711e+12
[Wed Oct 19 04:29:43 2011] Spectral fit parameter PhoIndex value = 2.33682
[Wed Oct 19 04:29:43 2011] Failed to get F(0.3-8.0) from acisf07851/analysis//spectral/fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Oct 19 04:29:43 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 04:29:43 2011] Using Nh = 8.8e+12, photon index=2.34, rate=0.0268, arf fullrun_ccd7_acisf07851_pi14-548_pass1_cl_src2.arf
[Wed Oct 19 04:29:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 04:29:43 2011] Updating source flux to 1.9e-13