[Sun Feb 19 18:47:04 2012] Detection parameters:
  Position = (345.4, 1017.7) = 1 25 55.44 -1 11 18.1
  Extent = 3.6" x 2.9", rotation angle = 132 degrees
  Source counts = 282.4 +/- 19.6
  Background counts = 102.6
  Rate = 0.004 +/- 0.0003

[Sun Feb 19 18:47:06 2012] Off-axis axis estimate = 9.31'
[Sun Feb 19 20:57:29 2012] Using EEF radius (= 3.83 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 20:57:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 20:57:29 2012] Initial guess for spatial extent in simple fitting = 3.83"
[Sun Feb 19 20:57:29 2012] source mask rpix=7.8, npix_max = 274, mask sum = 289, frac = 1.052
[Sun Feb 19 20:57:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.83"
[Sun Feb 19 21:24:03 2012] fullrun_ccd6_acisf07823_pi14-548_cl_pass0_src1.ximg exists
[Sun Feb 19 21:24:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07823_pi14-548_cl_pass0_src1.csv
[Sun Feb 19 21:24:03 2012] fullrun_ccd6_acisf07823_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Feb 19 21:24:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07823_pi14-548_cl_pass0_src1.csv
[Sun Feb 19 21:24:03 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf07823_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf07823_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 21:24:03 2012] fullrun_ccd6_acisf07823_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 19 21:24:03 2012] fullrun_ccd6_acisf07823_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 19 21:24:03 2012] Fit fullrun_ccd6_acisf07823_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 19 22:14:53 2012] Spatial fit model total counts = 411.951000, observed total counts = 412.000000
[Sun Feb 19 22:14:53 2012] Offset between fit and detection position for source 1 = 1.122009 pixels
[Sun Feb 19 22:14:53 2012] 411.945300 total counts/ 80.914300 bgd. counts: snr = 36.800695
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.122009 pixels
  Position = (345.4, 1018.8) = 1 25 55.45 -1 11 17.8
  Extent = 5.2 (4.6-5.8)", rotation angle = 0
  Source counts = 331.0 +/- 20.3
  Background counts = 80.9
  Rate = 0.005 +/- 0.0003
[Sun Feb 19 22:14:53 2012] Vigneting correction estimate = 1.000000
[Sun Feb 19 22:14:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 19 22:14:53 2012] Assessing source extent using major axis lower bound
[Sun Feb 19 22:14:53 2012] Source does appear to be extended
[Sun Feb 19 22:14:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 19 23:12:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 19 23:12:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 23:12:37 2012] Initial guess for spatial extent in simple fitting = 5.17"
[Sun Feb 19 23:12:37 2012] source mask rpix=10.5, npix_max = 484, mask sum = 484, frac = 0.998
[Sun Feb 19 23:12:37 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.17"
[Sun Feb 19 23:36:39 2012] fullrun_ccd6_acisf07823_pi14-548_cl_pass1_src1.ximg exists
[Sun Feb 19 23:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07823_pi14-548_cl_pass1_src1.csv
[Sun Feb 19 23:36:39 2012] fullrun_ccd6_acisf07823_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Feb 19 23:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07823_pi14-548_cl_pass1_src1.csv
[Sun Feb 19 23:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf07823_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf07823_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 19 23:36:39 2012] fullrun_ccd6_acisf07823_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 19 23:36:39 2012] fullrun_ccd6_acisf07823_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 19 23:36:39 2012] Fit fullrun_ccd6_acisf07823_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 20 00:15:47 2012] Spatial fit model total counts = 495.001000, observed total counts = 495.000000
[Mon Feb 20 00:15:47 2012] Offset between fit and detection position for source 1 = 0.583251 pixels
[Mon Feb 20 00:15:47 2012] 495.212000 total counts/ 171.297000 bgd. counts: snr = 24.748916
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.583251 pixels
  Position = (345.8, 1018.4) = 1 25 55.44 -1 11 18.0
  Extent = 5.1 (4.6-5.6)", rotation angle = 0
  Source counts = 323.9 +/- 22.3
  Background counts = 171.3
  Rate = 0.005 +/- 0.0003
[Mon Feb 20 00:15:47 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 00:15:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 00:15:47 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 00:15:47 2012] Source does appear to be extended
[Mon Feb 20 00:15:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 00:25:24 2012] Writing source region out to fullrun_ccd6_acisf07823_pi14-548_pass1_cl_src1_src.reg
[Mon Feb 20 00:25:24 2012] Extracting stamp from image fullrun_ccd6_acisf07823_pi14-548_cl_sm2.00.img.gz, (113, 786) - (579, 1205)
[Mon Feb 20 00:25:24 2012] Writing fullrun_ccd6_acisf07823_pi14-548_pass1_cl_src1.gif
[Mon Feb 20 00:25:27 2012] Size of ../../acisf07823/products/events/fullrun_ccd6_acisf07823_pi14-548_pass1_cl_src1_src.evt.gz[events] = 454 counts
[Mon Feb 20 00:25:27 2012] Mean chipx,y = (146.77, 836.59)
[Mon Feb 20 00:25:27 2012] Mean tdetx,y = (3021.77, 2538.59)
[Mon Feb 20 00:25:27 2012] chipx,y range = (98.00-201.00, 785.00-892.00)
[Mon Feb 20 00:25:27 2012] Size of ../../acisf07823/products/events/fullrun_ccd6_acisf07823_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1572 counts
[Mon Feb 20 00:25:28 2012] rmf not found, will run specextract
[Mon Feb 20 00:25:28 2012] arf not found, will run specextract
[Mon Feb 20 00:25:56 2012] ../../acisf07823/products/spectra/fullrun_ccd6_acisf07823_pi14-548_pass1_cl_src1.warf not found
[Mon Feb 20 00:25:56 2012] ../../acisf07823/products/spectra/fullrun_ccd6_acisf07823_pi14-548_pass1_cl_src1.wrmf not found
[Mon Feb 20 00:25:56 2012] Removal of ../../acisf07823/products/spectra/fullrun_ccd6_acisf07823_pi14-548_pass1_cl_src1.soff failed
[Mon Feb 20 00:36:34 2012] Keeping rmf generated by specextract
[Mon Feb 20 00:36:34 2012] 167.665
[Mon Feb 20 00:48:07 2012] Updating aperture counts using extracted products
[Mon Feb 20 00:48:07 2012] Error reading totcts from fullrun_ccd6_acisf07823_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Feb 20 00:48:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 00:48:07 2012] Using photon index=1.80, rate=0.005, arf fullrun_ccd6_acisf07823_pi14-548_pass1_cl_src1.arf
[Mon Feb 20 00:48:07 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Feb 20 00:48:07 2012] Updating source flux to 6.2e-14
[Mon Feb 20 00:48:28 2012] Reading fit data from acisf07823/analysis//spectral/fullrun_ccd6_acisf07823_pi14-548_pass1_cl_src1_pl.csv
[Mon Feb 20 00:48:28 2012] Spectral fit parameter nH value = 8.70729e+20
[Mon Feb 20 00:48:28 2012] Spectral fit parameter PhoIndex value = 2.01425
[Mon Feb 20 00:48:28 2012] Failed to get F(0.3-8.0) from acisf07823/analysis//spectral/fullrun_ccd6_acisf07823_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 20 00:48:28 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 00:48:28 2012] Using Nh = 8.7e+20, photon index=2.01, rate=0.005, arf fullrun_ccd6_acisf07823_pi14-548_pass1_cl_src1.arf
[Mon Feb 20 00:48:28 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Feb 20 00:48:28 2012] Updating source flux to 5.7e-14