[Sat Oct 15 04:30:48 2011] Detection parameters:
  Position = (847.0, 681.1) = 4 29 0.13 64 46 5.7
  Extent = 1.6" x 1.3", rotation angle = 138 degrees
  Source counts = 375.6 +/- 23.5
  Background counts = 178.4
  Rate = 0.004 +/- 0.0002

[Sat Oct 15 04:30:49 2011] Off-axis axis estimate = 12.80'
[Sat Oct 15 04:32:08 2011] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 04:32:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 04:32:08 2011] Initial guess for spatial extent in simple fitting = 7.34"
[Sat Oct 15 04:32:08 2011] source mask rpix=14.9, npix_max = 951, mask sum = 870, frac = 0.915
[Sat Oct 15 04:32:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Sat Oct 15 04:32:09 2011] fullrun_ccd3_acisf00782_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 04:32:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00782_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 04:32:09 2011] fullrun_ccd3_acisf00782_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 04:32:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00782_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 04:32:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00782_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00782_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 04:32:09 2011] fullrun_ccd3_acisf00782_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 04:32:09 2011] fullrun_ccd3_acisf00782_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 04:32:09 2011] Fit fullrun_ccd3_acisf00782_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 04:32:21 2011] Spatial fit model total counts = 926.223000, observed total counts = 933.000000
[Sat Oct 15 04:32:21 2011] Offset between fit and detection position for source 2 = 1.969763 pixels
[Sat Oct 15 04:32:21 2011] 926.704000 total counts/ 301.475000 bgd. counts: snr = 36.009199
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.969763 pixels
  Position = (845.6, 682.6) = 4 29 0.27 64 46 6.2
  Extent = 7.5 (6.9-8.1)", rotation angle = 0
  Source counts = 625.2 +/- 30.4
  Background counts = 301.5
  Rate = 0.006 +/- 0.0003
[Sat Oct 15 04:32:21 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 04:32:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 04:32:21 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 04:32:21 2011] Source does appear to be extended
[Sat Oct 15 04:32:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 04:32:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 04:32:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 04:32:51 2011] Initial guess for spatial extent in simple fitting = 7.46"
[Sat Oct 15 04:32:51 2011] source mask rpix=15.2, npix_max = 982, mask sum = 909, frac = 0.926
[Sat Oct 15 04:32:51 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.46"
[Sat Oct 15 04:32:51 2011] fullrun_ccd3_acisf00782_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 04:32:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00782_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 04:32:51 2011] fullrun_ccd3_acisf00782_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 04:32:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00782_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 04:32:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00782_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00782_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 04:32:51 2011] fullrun_ccd3_acisf00782_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 04:32:51 2011] fullrun_ccd3_acisf00782_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 04:32:51 2011] Fit fullrun_ccd3_acisf00782_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 04:33:04 2011] Spatial fit model total counts = 941.365000, observed total counts = 948.000000
[Sat Oct 15 04:33:04 2011] Offset between fit and detection position for source 2 = 0.064778 pixels
[Sat Oct 15 04:33:04 2011] 941.974000 total counts/ 318.868000 bgd. counts: snr = 34.894459
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.064778 pixels
  Position = (845.6, 682.5) = 4 29 0.27 64 46 6.1
  Extent = 7.4 (6.9-8.1)", rotation angle = 0
  Source counts = 623.1 +/- 30.7
  Background counts = 318.9
  Rate = 0.006 +/- 0.0003
[Sat Oct 15 04:33:04 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 04:33:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 04:33:04 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 04:33:04 2011] Source does appear to be extended
[Sat Oct 15 04:33:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 04:34:23 2011] Not overwriting source region fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 15 04:34:23 2011] Extracting stamp from image fullrun_ccd3_acisf00782_pi14-548_cl_sm2.00.img.gz, (506, 343) - (1185, 1022)
[Sat Oct 15 04:34:23 2011] Writing fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2.gif
[Sat Oct 15 04:34:24 2011] ../../acisf00782/products/events/fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_src.evt and ../../acisf00782/products/events/fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct 15 04:34:24 2011] Size of ../../acisf00782/products/events/fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_src.evt.gz[events] = 878 counts
[Sat Oct 15 04:34:24 2011] Mean chipx,y = (630.76, 468.16)
[Sat Oct 15 04:34:24 2011] Mean tdetx,y = (4663.84, 3691.76)
[Sat Oct 15 04:34:24 2011] chipx,y range = (559.00-701.00, 402.00-544.00)
[Sat Oct 15 04:34:24 2011] Size of ../../acisf00782/products/events/fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 2408 counts
[Sat Oct 15 04:34:24 2011] ../../acisf00782/products/images/fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_src.img and ../../acisf00782/products/images/fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct 15 04:34:24 2011] ../../acisf00782/products/spectra/fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_src.pi and ../../acisf00782/products/spectra/fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct 15 04:34:26 2011] ../../acisf00782/products/lightcurves/fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_src.lc and ../../acisf00782/products/lightcurves/fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct 15 04:34:56 2011] Keeping rmf generated by specextract
[Sat Oct 15 04:34:56 2011] 154.712
[Sat Oct 15 04:37:32 2011] Updating aperture counts using extracted products
[Sat Oct 15 04:37:32 2011] Error reading totcts from fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct 15 04:37:32 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 04:37:32 2011] Using photon index=1.80, rate=0.00644, arf fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2.arf
[Sat Oct 15 04:37:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 04:37:32 2011] Updating source flux to 8.4e-14
[Sat Oct 15 04:37:59 2011] Reading fit data from acisf00782/analysis//spectral/fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_pl.csv
[Sat Oct 15 04:37:59 2011] Spectral fit parameter nH value = 6.01628e+21
[Sat Oct 15 04:37:59 2011] Spectral fit parameter PhoIndex value = 5.20788
[Sat Oct 15 04:37:59 2011] Failed to get F(0.3-8.0) from acisf00782/analysis//spectral/fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 04:37:59 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 04:37:59 2011] Using Nh = 6e+21, photon index=5.21, rate=0.00644, arf fullrun_ccd3_acisf00782_pi14-548_pass1_cl_src2.arf
[Sat Oct 15 04:37:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 04:37:59 2011] Updating source flux to 4.4e-14