[Thu Sep 22 01:13:55 2011] Detection parameters:
  Position = (362.3, 590.5) = 17 14 20.76 53 15 37.6
  Extent = 1.3" x 0.9", rotation angle = 125 degrees
  Source counts = 118.0 +/- 11.0
  Background counts = 4.0
  Rate = 0.008 +/- 0.0007

[Thu Sep 22 01:13:57 2011] Off-axis axis estimate = 4.97'
[Thu Sep 22 01:14:58 2011] Using EEF radius (= 1.17 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 01:14:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 01:14:58 2011] Initial guess for spatial extent in simple fitting = 1.17"
[Thu Sep 22 01:14:58 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.909
[Thu Sep 22 01:14:58 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.17"
[Thu Sep 22 01:14:59 2011] fullrun_ccd6_acisf07814_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 01:14:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07814_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 01:14:59 2011] fullrun_ccd6_acisf07814_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 01:14:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07814_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 01:14:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf07814_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf07814_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 01:15:00 2011] fullrun_ccd6_acisf07814_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 01:15:00 2011] fullrun_ccd6_acisf07814_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 01:15:00 2011] Fit fullrun_ccd6_acisf07814_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 01:15:10 2011] Spatial fit model total counts = 120.710000, observed total counts = 121.000000
[Thu Sep 22 01:15:10 2011] Offset between fit and detection position for source 1 = 0.550022 pixels
[Thu Sep 22 01:15:10 2011] 122.211600 total counts/ 17.596600 bgd. counts: snr = 24.939031
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.550022 pixels
  Position = (362.7, 590.8) = 17 14 20.77 53 15 37.5
  Extent = 1.6 (1.2-2.0)", rotation angle = 0
  Source counts = 104.6 +/- 11.1
  Background counts = 17.6
  Rate = 0.007 +/- 0.0007
[Thu Sep 22 01:15:10 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 01:15:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 01:15:10 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 01:15:10 2011] Source does appear to be extended
[Thu Sep 22 01:15:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 01:15:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 01:15:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 01:15:33 2011] Initial guess for spatial extent in simple fitting = 1.56"
[Thu Sep 22 01:15:33 2011] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.913
[Thu Sep 22 01:15:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.56"
[Thu Sep 22 01:15:33 2011] fullrun_ccd6_acisf07814_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 01:15:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07814_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 01:15:33 2011] fullrun_ccd6_acisf07814_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 01:15:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07814_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 01:15:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf07814_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf07814_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 01:15:34 2011] fullrun_ccd6_acisf07814_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 01:15:34 2011] fullrun_ccd6_acisf07814_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 01:15:34 2011] Fit fullrun_ccd6_acisf07814_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 01:15:40 2011] Spatial fit model total counts = 126.039000, observed total counts = 127.000000
[Thu Sep 22 01:15:40 2011] Offset between fit and detection position for source 1 = 0.292859 pixels
[Thu Sep 22 01:15:40 2011] 125.413330 total counts/ 5.826330 bgd. counts: snr = 49.543471
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.292859 pixels
  Position = (362.9, 591.0) = 17 14 20.76 53 15 37.6
  Extent = 1.7 (1.5-2.0)", rotation angle = 0
  Source counts = 119.6 +/- 11.2
  Background counts = 5.8
  Rate = 0.008 +/- 0.0008
[Thu Sep 22 01:15:40 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 01:15:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 01:15:40 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 01:15:40 2011] Source does appear to be extended
[Thu Sep 22 01:15:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 01:16:29 2011] Not overwriting source region fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_src.reg
[Thu Sep 22 01:16:29 2011] Extracting stamp from image fullrun_ccd6_acisf07814_pi14-548_cl_sm2.00.img.gz, (285, 513) - (441, 669)
[Thu Sep 22 01:16:29 2011] Writing fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1.gif
[Thu Sep 22 01:16:41 2011] ../../acisf07814/products/events/fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_src.evt and ../../acisf07814/products/events/fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Sep 22 01:16:41 2011] Size of ../../acisf07814/products/events/fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_src.evt.gz[events] = 127 counts
[Thu Sep 22 01:16:41 2011] Mean chipx,y = (698.38, 778.33)
[Thu Sep 22 01:16:41 2011] Mean tdetx,y = (3573.38, 2480.33)
[Thu Sep 22 01:16:41 2011] chipx,y range = (675.00-721.00, 751.00-800.00)
[Thu Sep 22 01:16:41 2011] Size of ../../acisf07814/products/events/fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 41 counts
[Thu Sep 22 01:16:41 2011] ../../acisf07814/products/images/fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_src.img and ../../acisf07814/products/images/fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Sep 22 01:16:41 2011] ../../acisf07814/products/spectra/fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_src.pi and ../../acisf07814/products/spectra/fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Sep 22 01:16:45 2011] ../../acisf07814/products/lightcurves/fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_src.lc and ../../acisf07814/products/lightcurves/fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Sep 22 01:17:50 2011] Keeping rmf generated by specextract
[Thu Sep 22 01:17:50 2011] 176.374
[Thu Sep 22 01:18:57 2011] Updating aperture counts using extracted products
[Thu Sep 22 01:18:57 2011] Error reading totcts from fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Sep 22 01:18:57 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 01:18:57 2011] Using photon index=1.80, rate=0.00805, arf fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 01:18:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 01:18:57 2011] Updating source flux to 9.9e-14
[Thu Sep 22 01:19:10 2011] Reading fit data from acisf07814/analysis//spectral/fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_pl.csv
[Thu Sep 22 01:19:10 2011] Spectral fit parameter nH value = 3.77735e+17
[Thu Sep 22 01:19:10 2011] Spectral fit parameter PhoIndex value = 1.42641
[Thu Sep 22 01:19:10 2011] Failed to get F(0.3-8.0) from acisf07814/analysis//spectral/fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 01:19:10 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 01:19:10 2011] Using Nh = 3.8e+17, photon index=1.43, rate=0.00805, arf fullrun_ccd6_acisf07814_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 01:19:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 01:19:10 2011] Updating source flux to 1.1e-13