[Thu Sep 22 15:31:42 2011] Detection parameters:
  Position = (378.7, 340.0) = 13 25 37.36 -42 56 1.6
  Extent = 0.6" x 0.6", rotation angle = 170 degrees
  Source counts = 10.8 +/- 3.7
  Background counts = 3.2
  Rate = 0.0001 +/- 4e-05

[Thu Sep 22 15:31:43 2011] Off-axis axis estimate = 2.95'
[Thu Sep 22 15:34:30 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 15:34:30 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Thu Sep 22 15:34:30 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.090
[Thu Sep 22 15:34:30 2011] Giving source the simple spatial ID 53 for pass 0, mean size = 0.57"
[Thu Sep 22 15:34:38 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass0_src53.ximg exists
[Thu Sep 22 15:34:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07800_pi14-548_cl_pass0_src53.csv
[Thu Sep 22 15:34:38 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass0_src53_1.ximg exists
[Thu Sep 22 15:34:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07800_pi14-548_cl_pass0_src53.csv
[Thu Sep 22 15:34:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07800_pi14-548_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07800_pi14-548_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 15:34:40 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass0_tfrozen_src53.ximg exists
[Thu Sep 22 15:34:40 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass0_tfrozen_src53_1.ximg exists
[Thu Sep 22 15:34:40 2011] Fit fullrun_ccd3_acisf07800_pi14-548_cl_pass0_tfrozen_src53 appears to have run properly
[Thu Sep 22 15:35:25 2011] Spatial fit model total counts = 19.949100, observed total counts = 20.000000
[Thu Sep 22 15:35:25 2011] Offset between fit and detection position for source 59 = 0.629437 pixels
[Thu Sep 22 15:35:25 2011] 20.061020 total counts/ 7.734520 bgd. counts: snr = 4.432238
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.629437 pixels
  Position = (379.0, 340.6) = 13 25 37.37 -42 56 1.6
  Extent = 0.7 (0.3-1.2)", rotation angle = 0
  Source counts = 12.3 +/- 4.5
  Background counts = 7.7
  Rate = 0.0001 +/- 5e-05
[Thu Sep 22 15:35:25 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 15:35:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 15:35:25 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 15:35:25 2011] Source does appear to be extended
[Thu Sep 22 15:35:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 15:36:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 15:36:25 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Thu Sep 22 15:36:25 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.014
[Thu Sep 22 15:36:25 2011] Giving source the simple spatial ID 53 for pass 1, mean size = 0.73"
[Thu Sep 22 15:36:33 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass1_src53.ximg exists
[Thu Sep 22 15:36:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07800_pi14-548_cl_pass1_src53.csv
[Thu Sep 22 15:36:33 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass1_src53_1.ximg exists
[Thu Sep 22 15:36:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07800_pi14-548_cl_pass1_src53.csv
[Thu Sep 22 15:36:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07800_pi14-548_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07800_pi14-548_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 15:36:34 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass1_tfrozen_src53.ximg exists
[Thu Sep 22 15:36:34 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass1_tfrozen_src53_1.ximg exists
[Thu Sep 22 15:36:34 2011] Fit fullrun_ccd3_acisf07800_pi14-548_cl_pass1_tfrozen_src53 appears to have run properly
[Thu Sep 22 15:37:27 2011] Spatial fit model total counts = 18.664600, observed total counts = 19.000000
[Thu Sep 22 15:37:27 2011] Offset between fit and detection position for source 59 = 0.066427 pixels
[Thu Sep 22 15:37:27 2011] 18.674860 total counts/ 6.490760 bgd. counts: snr = 4.782398
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 0.066427 pixels
  Position = (379.0, 340.6) = 13 25 37.37 -42 56 1.6
  Extent = 0.8 (0.3-1.2)", rotation angle = 0
  Source counts = 12.2 +/- 4.3
  Background counts = 6.5
  Rate = 0.0001 +/- 5e-05
[Thu Sep 22 15:37:27 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 15:37:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 15:37:27 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 15:37:27 2011] Source does appear to be extended
[Thu Sep 22 15:37:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 15:53:46 2011] Not overwriting source region fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59_src.reg
[Thu Sep 22 15:53:46 2011] Extracting stamp from image fullrun_ccd3_acisf07800_pi14-548_cl_sm2.00.img.gz, (345, 306) - (413, 375)
[Thu Sep 22 15:53:46 2011] Writing fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59.gif
[Thu Sep 22 15:57:11 2011] ../../acisf07800/products/events/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59_src.evt and ../../acisf07800/products/events/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59_bgd.evt exist, delete to re-create
[Thu Sep 22 15:57:11 2011] Size of ../../acisf07800/products/events/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59_src.evt.gz[events] = 15 counts
[Thu Sep 22 15:57:11 2011] Mean chipx,y = (724.53, 739.00)
[Thu Sep 22 15:57:11 2011] Mean tdetx,y = (4393.00, 3785.53)
[Thu Sep 22 15:57:11 2011] chipx,y range = (709.00-740.00, 726.00-757.00)
[Thu Sep 22 15:57:11 2011] Size of ../../acisf07800/products/events/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59_bgd.evt.gz[events] = 66 counts
[Thu Sep 22 15:57:11 2011] ../../acisf07800/products/images/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59_src.img and ../../acisf07800/products/images/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59_bgd.img exist, delete to re-create
[Thu Sep 22 15:57:11 2011] ../../acisf07800/products/spectra/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59_src.pi and ../../acisf07800/products/spectra/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59_bgd.pi exist, delete to re-create
[Thu Sep 22 15:57:11 2011] Not generating rmf since there are only 12 counts
[Thu Sep 22 15:57:14 2011] ../../acisf07800/products/lightcurves/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59_src.lc and ../../acisf07800/products/lightcurves/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59_bgd.lc exist, delete to re-create
[Thu Sep 22 15:57:49 2011] 196.25
[Thu Sep 22 15:58:11 2011] Updating aperture counts using extracted products
[Thu Sep 22 15:58:11 2011] Error reading totcts from fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59_src.pi.gz
[Thu Sep 22 15:58:12 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 15:58:12 2011] Using photon index=1.80, rate=0.000134, arf fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src59.arf
[Thu Sep 22 15:58:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 15:58:12 2011] Updating source flux to 1.5e-15
[Thu Sep 22 16:02:42 2011] Source 59 has fewer than 100.000000 counts, skipping spectral fitting