[Thu Sep 22 15:31:40 2011] Detection parameters:
  Position = (706.6, 462.5) = 13 25 22.68 -42 55 1.2
  Extent = 0.5" x 0.5", rotation angle = 41 degrees
  Source counts = 67.5 +/- 8.5
  Background counts = 5.5
  Rate = 0.0007 +/- 9e-05

[Thu Sep 22 15:31:43 2011] Off-axis axis estimate = 5.68'
[Thu Sep 22 15:34:30 2011] Using EEF radius (= 1.47 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 15:34:30 2011] Initial guess for spatial extent in simple fitting = 1.47"
[Thu Sep 22 15:34:30 2011] source mask rpix=3.0, npix_max = 48, mask sum = 32, frac = 0.655
[Thu Sep 22 15:34:30 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 1.47"
[Thu Sep 22 15:34:32 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass0_src21.ximg exists
[Thu Sep 22 15:34:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07800_pi14-548_cl_pass0_src21.csv
[Thu Sep 22 15:34:32 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass0_src21_1.ximg exists
[Thu Sep 22 15:34:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07800_pi14-548_cl_pass0_src21.csv
[Thu Sep 22 15:34:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07800_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07800_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 15:34:39 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Thu Sep 22 15:34:39 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Sep 22 15:34:39 2011] Fit fullrun_ccd3_acisf07800_pi14-548_cl_pass0_tfrozen_src21 appears to have run properly
[Thu Sep 22 15:35:25 2011] Spatial fit model total counts = 113.965000, observed total counts = 113.000000
[Thu Sep 22 15:35:25 2011] Offset between fit and detection position for source 40 = 0.513256 pixels
[Thu Sep 22 15:35:25 2011] 116.121700 total counts/ 47.713500 bgd. counts: snr = 9.903473
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.513256 pixels
  Position = (707.1, 462.6) = 13 25 22.68 -42 55 1.4
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 68.4 +/- 10.8
  Background counts = 47.7
  Rate = 0.0008 +/- 0.0001
[Thu Sep 22 15:35:25 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 15:35:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 15:35:25 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 15:35:25 2011] Source does appear to be extended
[Thu Sep 22 15:35:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 15:36:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 15:36:25 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Thu Sep 22 15:36:25 2011] source mask rpix=1.6, npix_max = 18, mask sum = 14, frac = 0.767
[Thu Sep 22 15:36:25 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 0.80"
[Thu Sep 22 15:36:32 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass1_src21.ximg exists
[Thu Sep 22 15:36:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07800_pi14-548_cl_pass1_src21.csv
[Thu Sep 22 15:36:32 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass1_src21_1.ximg exists
[Thu Sep 22 15:36:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07800_pi14-548_cl_pass1_src21.csv
[Thu Sep 22 15:36:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07800_pi14-548_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07800_pi14-548_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 15:36:33 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass1_tfrozen_src21.ximg exists
[Thu Sep 22 15:36:33 2011] fullrun_ccd3_acisf07800_pi14-548_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Sep 22 15:36:33 2011] Fit fullrun_ccd3_acisf07800_pi14-548_cl_pass1_tfrozen_src21 appears to have run properly
[Thu Sep 22 15:37:27 2011] Spatial fit model total counts = 108.574000, observed total counts = 108.000000
[Thu Sep 22 15:37:27 2011] Offset between fit and detection position for source 40 = 0.039117 pixels
[Thu Sep 22 15:37:27 2011] 109.790600 total counts/ 42.605400 bgd. counts: snr = 10.292984
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.039117 pixels
  Position = (707.1, 462.7) = 13 25 22.67 -42 55 1.4
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 67.2 +/- 10.5
  Background counts = 42.6
  Rate = 0.0007 +/- 0.0001
[Thu Sep 22 15:37:27 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 15:37:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 15:37:27 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 15:37:27 2011] Source does appear to be extended
[Thu Sep 22 15:37:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 15:53:46 2011] Not overwriting source region fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40_src.reg
[Thu Sep 22 15:53:46 2011] Extracting stamp from image fullrun_ccd3_acisf07800_pi14-548_cl_sm2.00.img.gz, (671, 426) - (743, 499)
[Thu Sep 22 15:53:46 2011] Writing fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40.gif
[Thu Sep 22 15:55:20 2011] ../../acisf07800/products/events/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40_src.evt and ../../acisf07800/products/events/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40_bgd.evt exist, delete to re-create
[Thu Sep 22 15:55:20 2011] Size of ../../acisf07800/products/events/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40_src.evt.gz[events] = 89 counts
[Thu Sep 22 15:55:20 2011] Mean chipx,y = (640.63, 402.30)
[Thu Sep 22 15:55:20 2011] Mean tdetx,y = (4729.70, 3701.63)
[Thu Sep 22 15:55:20 2011] chipx,y range = (621.00-659.00, 382.00-424.00)
[Thu Sep 22 15:55:20 2011] Size of ../../acisf07800/products/events/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40_bgd.evt.gz[events] = 60 counts
[Thu Sep 22 15:55:20 2011] ../../acisf07800/products/images/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40_src.img and ../../acisf07800/products/images/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40_bgd.img exist, delete to re-create
[Thu Sep 22 15:55:20 2011] ../../acisf07800/products/spectra/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40_src.pi and ../../acisf07800/products/spectra/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40_bgd.pi exist, delete to re-create
[Thu Sep 22 15:55:20 2011] Not generating rmf since there are only 67 counts
[Thu Sep 22 15:55:23 2011] ../../acisf07800/products/lightcurves/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40_src.lc and ../../acisf07800/products/lightcurves/fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40_bgd.lc exist, delete to re-create
[Thu Sep 22 15:57:48 2011] 173.287
[Thu Sep 22 15:58:11 2011] Updating aperture counts using extracted products
[Thu Sep 22 15:58:11 2011] Error reading totcts from fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40_src.pi.gz
[Thu Sep 22 15:58:12 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 15:58:12 2011] Using photon index=1.80, rate=0.00074, arf fullrun_ccd3_acisf07800_pi14-548_pass1_cl_src40.arf
[Thu Sep 22 15:58:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 15:58:12 2011] Updating source flux to 9.6e-15
[Thu Sep 22 16:02:42 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting