[Mon Feb 20 16:32:58 2012] Detection parameters:
  Position = (397.5, 1010.5) = 13 26 1.05 -43 5 24.7
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 14.8 +/- 4.1
  Background counts = 2.2
  Rate = 0.0002 +/- 5e-05

[Mon Feb 20 16:32:59 2012] Off-axis axis estimate = 5.80'
[Mon Feb 20 17:16:09 2012] Using EEF radius (= 1.53 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 17:16:09 2012] Initial guess for spatial extent in simple fitting = 1.53"
[Mon Feb 20 17:16:09 2012] source mask rpix=3.1, npix_max = 52, mask sum = 41, frac = 0.785
[Mon Feb 20 17:16:09 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 1.53"
[Mon Feb 20 18:57:46 2012] fullrun_ccd1_acisf07798_pi14-548_cl_pass0_src36.ximg exists
[Mon Feb 20 18:57:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07798_pi14-548_cl_pass0_src36.csv
[Mon Feb 20 18:57:46 2012] fullrun_ccd1_acisf07798_pi14-548_cl_pass0_src36_1.ximg exists
[Mon Feb 20 18:57:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07798_pi14-548_cl_pass0_src36.csv
[Mon Feb 20 18:57:46 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07798_pi14-548_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07798_pi14-548_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 18:57:46 2012] fullrun_ccd1_acisf07798_pi14-548_cl_pass0_tfrozen_src36.ximg exists
[Mon Feb 20 18:57:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07798_pi14-548_cl_pass0_tfrozen_src36.csv
[Mon Feb 20 18:57:46 2012] fullrun_ccd1_acisf07798_pi14-548_cl_pass0_tfrozen_src36_1.ximg exists
[Mon Feb 20 18:57:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07798_pi14-548_cl_pass0_tfrozen_src36.csv
[Mon Feb 20 18:57:46 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07798_pi14-548_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07798_pi14-548_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 23:37:26 2012] Source 24 is offset by -6.207683 and -7.207683 pixels which is larger than
2 X fitted extent = 1.588459 x 1.588459, not incorporating fit results
[Mon Feb 20 23:37:26 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 18.315675 pixels away
[Mon Feb 20 23:37:26 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 23:37:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 23:37:26 2012] Assessing source extent using major
[Mon Feb 20 23:37:26 2012] Source does appear to be extended
[Mon Feb 20 23:37:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 23:37:26 2012] Deleting source due to low Poisson probability 0.9