[Wed Sep 21 10:04:57 2011] Detection parameters:
  Position = (732.0, 167.1) = 13 24 57.89 -43 8 12.7
  Extent = 2.0" x 1.3", rotation angle = 95 degrees
  Source counts = 67.6 +/- 9.6
  Background counts = 24.4
  Rate = 0.0007 +/- 0.0001

[Wed Sep 21 10:05:00 2011] Off-axis axis estimate = 7.21'
[Wed Sep 21 10:07:46 2011] Using EEF radius (= 2.31 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 10:07:46 2011] Initial guess for spatial extent in simple fitting = 2.31"
[Wed Sep 21 10:07:46 2011] source mask rpix=4.7, npix_max = 107, mask sum = 100, frac = 0.928
[Wed Sep 21 10:07:46 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 2.31"
[Wed Sep 21 10:07:48 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass0_src22.ximg exists
[Wed Sep 21 10:07:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07797_pi14-548_cl_pass0_src22.csv
[Wed Sep 21 10:07:48 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass0_src22_1.ximg exists
[Wed Sep 21 10:07:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07797_pi14-548_cl_pass0_src22.csv
[Wed Sep 21 10:07:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07797_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07797_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 10:07:50 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Wed Sep 21 10:07:50 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Sep 21 10:07:50 2011] Fit fullrun_ccd3_acisf07797_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Wed Sep 21 10:08:36 2011] Spatial fit model total counts = 116.075000, observed total counts = 116.000000
[Wed Sep 21 10:08:36 2011] Offset between fit and detection position for source 60 = 0.768242 pixels
[Wed Sep 21 10:08:36 2011] 115.697100 total counts/ 54.307500 bgd. counts: snr = 8.330382
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.768242 pixels
  Position = (732.8, 167.1) = 13 24 57.87 -43 8 13.0
  Extent = 1.8 (1.3-2.4)", rotation angle = 0
  Source counts = 61.4 +/- 10.8
  Background counts = 54.3
  Rate = 0.0006 +/- 0.0001
[Wed Sep 21 10:08:37 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 10:08:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 10:08:37 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 10:08:37 2011] Source does appear to be extended
[Wed Sep 21 10:08:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 10:09:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 10:09:33 2011] Initial guess for spatial extent in simple fitting = 1.75"
[Wed Sep 21 10:09:33 2011] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.968
[Wed Sep 21 10:09:33 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 1.75"
[Wed Sep 21 10:09:36 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass1_src22.ximg exists
[Wed Sep 21 10:09:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07797_pi14-548_cl_pass1_src22.csv
[Wed Sep 21 10:09:36 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass1_src22_1.ximg exists
[Wed Sep 21 10:09:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07797_pi14-548_cl_pass1_src22.csv
[Wed Sep 21 10:09:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07797_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07797_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 10:09:38 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Wed Sep 21 10:09:38 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Wed Sep 21 10:09:38 2011] Fit fullrun_ccd3_acisf07797_pi14-548_cl_pass1_tfrozen_src22 appears to have run properly
[Wed Sep 21 10:10:21 2011] Spatial fit model total counts = 92.318600, observed total counts = 92.000000
[Wed Sep 21 10:10:21 2011] Offset between fit and detection position for source 60 = 0.326368 pixels
[Wed Sep 21 10:10:21 2011] 92.311800 total counts/ 43.877300 bgd. counts: snr = 7.311978
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.326368 pixels
  Position = (732.8, 166.7) = 13 24 57.87 -43 8 13.1
  Extent = 1.5 (1.0-2.3)", rotation angle = 0
  Source counts = 48.4 +/- 9.6
  Background counts = 43.9
  Rate = 0.0005 +/- 0.0001
[Wed Sep 21 10:10:22 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 10:10:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 10:10:22 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 10:10:22 2011] Source does appear to be extended
[Wed Sep 21 10:10:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 10:24:35 2011] Not overwriting source region fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60_src.reg
[Wed Sep 21 10:24:35 2011] Extracting stamp from image fullrun_ccd3_acisf07797_pi14-548_cl_sm2.00.img.gz, (664, 98) - (802, 236)
[Wed Sep 21 10:24:35 2011] Writing fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60.gif
[Wed Sep 21 10:25:52 2011] ../../acisf07797/products/events/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60_src.evt and ../../acisf07797/products/events/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60_bgd.evt exist, delete to re-create
[Wed Sep 21 10:25:52 2011] Size of ../../acisf07797/products/events/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60_src.evt.gz[events] = 92 counts
[Wed Sep 21 10:25:52 2011] Mean chipx,y = (970.13, 225.83)
[Wed Sep 21 10:25:52 2011] Mean tdetx,y = (4906.17, 4031.13)
[Wed Sep 21 10:25:52 2011] chipx,y range = (945.00-995.00, 200.00-245.00)
[Wed Sep 21 10:25:52 2011] Size of ../../acisf07797/products/events/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60_bgd.evt.gz[events] = 143 counts
[Wed Sep 21 10:25:52 2011] ../../acisf07797/products/images/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60_src.img and ../../acisf07797/products/images/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60_bgd.img exist, delete to re-create
[Wed Sep 21 10:25:52 2011] ../../acisf07797/products/spectra/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60_src.pi and ../../acisf07797/products/spectra/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60_bgd.pi exist, delete to re-create
[Wed Sep 21 10:25:52 2011] Not generating rmf since there are only 48 counts
[Wed Sep 21 10:25:55 2011] ../../acisf07797/products/lightcurves/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60_src.lc and ../../acisf07797/products/lightcurves/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60_bgd.lc exist, delete to re-create
[Wed Sep 21 10:28:24 2011] 181.09
[Wed Sep 21 10:29:08 2011] Updating aperture counts using extracted products
[Wed Sep 21 10:29:08 2011] Error reading totcts from fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60_src.pi.gz
[Wed Sep 21 10:29:09 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 10:29:09 2011] Using photon index=1.80, rate=0.0005, arf fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src60.arf
[Wed Sep 21 10:29:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 10:29:09 2011] Updating source flux to 6.2e-15
[Wed Sep 21 10:35:48 2011] Source 60 has fewer than 100.000000 counts, skipping spectral fitting