[Wed Sep 21 10:04:55 2011] Detection parameters:
  Position = (237.4, 782.9) = 13 25 20.12 -43 3 9.8
  Extent = 0.5" x 0.5", rotation angle = 99 degrees
  Source counts = 165.2 +/- 13.3
  Background counts = 11.8
  Rate = 0.002 +/- 0.0001

[Wed Sep 21 10:05:00 2011] Off-axis axis estimate = 0.82'
[Wed Sep 21 10:07:46 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 10:07:46 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Sep 21 10:07:46 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.922
[Wed Sep 21 10:07:46 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.38"
[Wed Sep 21 10:07:48 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass0_src15.ximg exists
[Wed Sep 21 10:07:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07797_pi14-548_cl_pass0_src15.csv
[Wed Sep 21 10:07:48 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass0_src15_1.ximg exists
[Wed Sep 21 10:07:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07797_pi14-548_cl_pass0_src15.csv
[Wed Sep 21 10:07:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07797_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07797_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 10:07:49 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Wed Sep 21 10:07:49 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Sep 21 10:07:49 2011] Fit fullrun_ccd3_acisf07797_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Sep 21 10:08:36 2011] Spatial fit model total counts = 193.661000, observed total counts = 194.000000
[Wed Sep 21 10:08:36 2011] Offset between fit and detection position for source 31 = 0.725823 pixels
[Wed Sep 21 10:08:36 2011] 192.990100 total counts/ 30.679100 bgd. counts: snr = 29.303982
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.725823 pixels
  Position = (237.9, 783.4) = 13 25 20.12 -43 3 9.8
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 162.3 +/- 13.9
  Background counts = 30.7
  Rate = 0.002 +/- 0.0001
[Wed Sep 21 10:08:37 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 10:08:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 10:08:37 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 10:08:37 2011] Source does appear to be extended
[Wed Sep 21 10:08:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 10:09:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 10:09:33 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Wed Sep 21 10:09:33 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.997
[Wed Sep 21 10:09:33 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.49"
[Wed Sep 21 10:09:35 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass1_src15.ximg exists
[Wed Sep 21 10:09:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07797_pi14-548_cl_pass1_src15.csv
[Wed Sep 21 10:09:35 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass1_src15_1.ximg exists
[Wed Sep 21 10:09:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07797_pi14-548_cl_pass1_src15.csv
[Wed Sep 21 10:09:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07797_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07797_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 10:09:38 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Wed Sep 21 10:09:38 2011] fullrun_ccd3_acisf07797_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Sep 21 10:09:38 2011] Fit fullrun_ccd3_acisf07797_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Sep 21 10:10:21 2011] Spatial fit model total counts = 193.661000, observed total counts = 194.000000
[Wed Sep 21 10:10:21 2011] Offset between fit and detection position for source 31 = 0.000000 pixels
[Wed Sep 21 10:10:21 2011] 192.990100 total counts/ 30.679100 bgd. counts: snr = 29.303982
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.000000 pixels
  Position = (237.9, 783.4) = 13 25 20.12 -43 3 9.8
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 162.3 +/- 13.9
  Background counts = 30.7
  Rate = 0.002 +/- 0.0001
[Wed Sep 21 10:10:21 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 10:10:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 10:10:21 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 10:10:21 2011] Source does appear to be extended
[Wed Sep 21 10:10:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 10:24:35 2011] Not overwriting source region fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31_src.reg
[Wed Sep 21 10:24:35 2011] Extracting stamp from image fullrun_ccd3_acisf07797_pi14-548_cl_sm2.00.img.gz, (215, 761) - (260, 806)
[Wed Sep 21 10:24:35 2011] Writing fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31.gif
[Wed Sep 21 10:25:28 2011] ../../acisf07797/products/events/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31_src.evt and ../../acisf07797/products/events/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Wed Sep 21 10:25:28 2011] Size of ../../acisf07797/products/events/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31_src.evt.gz[events] = 170 counts
[Wed Sep 21 10:25:28 2011] Mean chipx,y = (663.94, 957.38)
[Wed Sep 21 10:25:28 2011] Mean tdetx,y = (4174.62, 3724.94)
[Wed Sep 21 10:25:28 2011] chipx,y range = (648.00-682.00, 939.00-975.00)
[Wed Sep 21 10:25:28 2011] Size of ../../acisf07797/products/events/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 58 counts
[Wed Sep 21 10:25:28 2011] ../../acisf07797/products/images/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31_src.img and ../../acisf07797/products/images/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Wed Sep 21 10:25:28 2011] ../../acisf07797/products/spectra/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31_src.pi and ../../acisf07797/products/spectra/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Wed Sep 21 10:25:31 2011] ../../acisf07797/products/lightcurves/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31_src.lc and ../../acisf07797/products/lightcurves/fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Wed Sep 21 10:28:24 2011] Keeping rmf generated by specextract
[Wed Sep 21 10:28:24 2011] 202.982
[Wed Sep 21 10:29:07 2011] Updating aperture counts using extracted products
[Wed Sep 21 10:29:07 2011] Error reading totcts from fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31_src.pi.gz
[Wed Sep 21 10:29:08 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 10:29:08 2011] Using photon index=1.80, rate=0.00168, arf fullrun_ccd3_acisf07797_pi14-548_pass1_cl_src31.arf
[Wed Sep 21 10:29:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 10:29:08 2011] Updating source flux to 1.9e-14