[Wed Oct 19 03:48:39 2011] Detection parameters:
  Position = (1068.1, 964.5) = 13 35 43.79 35 33 25.6
  Extent = 0.6" x 0.5", rotation angle = 42 degrees
  Source counts = 11.0 +/- 3.5
  Background counts = 1.0
  Rate = 0.0005 +/- 0.0001

[Wed Oct 19 03:48:40 2011] Off-axis axis estimate = 1.15'
[Wed Oct 19 03:49:05 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 03:49:05 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Oct 19 03:49:05 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.923
[Wed Oct 19 03:49:05 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.38"
[Wed Oct 19 03:49:07 2011] fullrun_ccd7_acisf07783_pi14-548_cl_pass0_src19.ximg exists
[Wed Oct 19 03:49:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07783_pi14-548_cl_pass0_src19.csv
[Wed Oct 19 03:49:07 2011] fullrun_ccd7_acisf07783_pi14-548_cl_pass0_src19_1.ximg exists
[Wed Oct 19 03:49:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07783_pi14-548_cl_pass0_src19.csv
[Wed Oct 19 03:49:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf07783_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf07783_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 03:49:08 2011] fullrun_ccd7_acisf07783_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Wed Oct 19 03:49:08 2011] fullrun_ccd7_acisf07783_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Oct 19 03:49:08 2011] Fit fullrun_ccd7_acisf07783_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Oct 19 03:49:12 2011] Spatial fit model total counts = 18.000500, observed total counts = 18.000000
[Wed Oct 19 03:49:12 2011] Offset between fit and detection position for source 10 = 1.028647 pixels
[Wed Oct 19 03:49:12 2011] 17.964560 total counts/ 7.569460 bgd. counts: snr = 3.778298
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.028647 pixels
  Position = (1068.9, 965.1) = 13 35 43.78 35 33 25.7
  Extent = 0.5 (0.2-0.7)", rotation angle = 0
  Source counts = 10.4 +/- 4.2
  Background counts = 7.6
  Rate = 0.0004 +/- 0.0002
[Wed Oct 19 03:49:12 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 03:49:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 03:49:12 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 03:49:12 2011] Source does appear to be extended
[Wed Oct 19 03:49:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 03:49:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 03:49:28 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Wed Oct 19 03:49:28 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.098
[Wed Oct 19 03:49:28 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 0.46"
[Wed Oct 19 03:49:29 2011] fullrun_ccd7_acisf07783_pi14-548_cl_pass1_src19.ximg exists
[Wed Oct 19 03:49:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07783_pi14-548_cl_pass1_src19.csv
[Wed Oct 19 03:49:29 2011] fullrun_ccd7_acisf07783_pi14-548_cl_pass1_src19_1.ximg exists
[Wed Oct 19 03:49:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07783_pi14-548_cl_pass1_src19.csv
[Wed Oct 19 03:49:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf07783_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf07783_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 03:49:32 2011] fullrun_ccd7_acisf07783_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Wed Oct 19 03:49:32 2011] fullrun_ccd7_acisf07783_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Oct 19 03:49:32 2011] Fit fullrun_ccd7_acisf07783_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Oct 19 03:49:36 2011] Spatial fit model total counts = 16.945500, observed total counts = 17.000000
[Wed Oct 19 03:49:36 2011] Offset between fit and detection position for source 10 = 0.028905 pixels
[Wed Oct 19 03:49:36 2011] 16.790710 total counts/ 6.347410 bgd. counts: snr = 4.145143
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.028905 pixels
  Position = (1068.9, 965.1) = 13 35 43.78 35 33 25.7
  Extent = 0.5 (0.2-0.7)", rotation angle = 0
  Source counts = 10.4 +/- 4.1
  Background counts = 6.3
  Rate = 0.0004 +/- 0.0002
[Wed Oct 19 03:49:36 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 03:49:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 03:49:36 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 03:49:36 2011] Source does appear to be extended
[Wed Oct 19 03:49:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 03:49:50 2011] Not overwriting source region fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10_src.reg
[Wed Oct 19 03:49:50 2011] Extracting stamp from image fullrun_ccd7_acisf07783_pi14-548_cl_sm2.00.img.gz, (1048, 944) - (1090, 986)
[Wed Oct 19 03:49:50 2011] Writing fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10.gif
[Wed Oct 19 03:50:44 2011] ../../acisf07783/products/events/fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10_src.evt and ../../acisf07783/products/events/fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Oct 19 03:50:44 2011] Size of ../../acisf07783/products/events/fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10_src.evt.gz[events] = 11 counts
[Wed Oct 19 03:50:44 2011] Mean chipx,y = (99.82, 398.18)
[Wed Oct 19 03:50:44 2011] Mean tdetx,y = (4016.82, 2100.18)
[Wed Oct 19 03:50:44 2011] chipx,y range = (83.00-112.00, 382.00-413.00)
[Wed Oct 19 03:50:44 2011] Size of ../../acisf07783/products/events/fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 10 counts
[Wed Oct 19 03:50:44 2011] ../../acisf07783/products/images/fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10_src.img and ../../acisf07783/products/images/fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Oct 19 03:50:44 2011] ../../acisf07783/products/spectra/fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10_src.pi and ../../acisf07783/products/spectra/fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Oct 19 03:50:44 2011] Not generating rmf since there are only 10 counts
[Wed Oct 19 03:50:47 2011] ../../acisf07783/products/lightcurves/fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10_src.lc and ../../acisf07783/products/lightcurves/fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Oct 19 03:51:01 2011] 232.983
[Wed Oct 19 03:51:02 2011] Updating aperture counts using extracted products
[Wed Oct 19 03:51:02 2011] Error reading totcts from fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Oct 19 03:51:02 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 03:51:02 2011] Using photon index=1.80, rate=0.000445, arf fullrun_ccd7_acisf07783_pi14-548_pass1_cl_src10.arf
[Wed Oct 19 03:51:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 03:51:02 2011] Updating source flux to 3.3e-15
[Wed Oct 19 03:51:06 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting