[Fri Sep 30 13:17:37 2011] Detection parameters:
  Position = (608.7, 448.8) = 11 18 15.08 7 41 59.3
  Extent = 0.7" x 0.5", rotation angle = 60 degrees
  Source counts = 23.7 +/- 5.1
  Background counts = 2.3
  Rate = 0.0008 +/- 0.0002

[Fri Sep 30 13:17:37 2011] Off-axis axis estimate = 4.31'
[Fri Sep 30 13:18:39 2011] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 13:18:39 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Fri Sep 30 13:18:39 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.099
[Fri Sep 30 13:18:39 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.93"
[Fri Sep 30 13:18:43 2011] fullrun_ccd7_acisf07757_pi14-548_cl_pass0_src15.ximg exists
[Fri Sep 30 13:18:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07757_pi14-548_cl_pass0_src15.csv
[Fri Sep 30 13:18:43 2011] fullrun_ccd7_acisf07757_pi14-548_cl_pass0_src15_1.ximg exists
[Fri Sep 30 13:18:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07757_pi14-548_cl_pass0_src15.csv
[Fri Sep 30 13:18:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf07757_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf07757_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 13:18:43 2011] fullrun_ccd7_acisf07757_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Fri Sep 30 13:18:43 2011] fullrun_ccd7_acisf07757_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Sep 30 13:18:43 2011] Fit fullrun_ccd7_acisf07757_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Fri Sep 30 13:18:53 2011] Spatial fit model total counts = 28.266600, observed total counts = 30.000000
[Fri Sep 30 13:18:53 2011] Offset between fit and detection position for source 31 = 0.691896 pixels
[Fri Sep 30 13:18:53 2011] 27.926660 total counts/ 3.264460 bgd. counts: snr = 13.649795
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.691896 pixels
  Position = (609.2, 449.3) = 11 18 15.08 7 41 59.2
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 24.7 +/- 5.3
  Background counts = 3.3
  Rate = 0.0009 +/- 0.0002
[Fri Sep 30 13:18:53 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 13:18:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 13:18:53 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 13:18:53 2011] Source does appear to be extended
[Fri Sep 30 13:18:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 13:19:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 13:19:14 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Fri Sep 30 13:19:14 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Fri Sep 30 13:19:14 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.82"
[Fri Sep 30 13:19:15 2011] fullrun_ccd7_acisf07757_pi14-548_cl_pass1_src15.ximg exists
[Fri Sep 30 13:19:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07757_pi14-548_cl_pass1_src15.csv
[Fri Sep 30 13:19:16 2011] fullrun_ccd7_acisf07757_pi14-548_cl_pass1_src15_1.ximg exists
[Fri Sep 30 13:19:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07757_pi14-548_cl_pass1_src15.csv
[Fri Sep 30 13:19:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf07757_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf07757_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 13:19:16 2011] fullrun_ccd7_acisf07757_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Fri Sep 30 13:19:16 2011] fullrun_ccd7_acisf07757_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Sep 30 13:19:16 2011] Fit fullrun_ccd7_acisf07757_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Sep 30 13:19:27 2011] Spatial fit model total counts = 27.658100, observed total counts = 30.000000
[Fri Sep 30 13:19:27 2011] Offset between fit and detection position for source 31 = 0.079310 pixels
[Fri Sep 30 13:19:27 2011] 27.081440 total counts/ 1.398440 bgd. counts: snr = 21.718200
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.079310 pixels
  Position = (609.3, 449.3) = 11 18 15.08 7 41 59.2
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 25.7 +/- 5.2
  Background counts = 1.4
  Rate = 0.0009 +/- 0.0002
[Fri Sep 30 13:19:27 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 13:19:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 13:19:27 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 13:19:27 2011] Source does appear to be extended
[Fri Sep 30 13:19:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 13:20:18 2011] Not overwriting source region fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31_src.reg
[Fri Sep 30 13:20:18 2011] Extracting stamp from image fullrun_ccd7_acisf07757_pi14-548_cl_sm2.00.img.gz, (571, 411) - (648, 488)
[Fri Sep 30 13:20:18 2011] Writing fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31.gif
[Fri Sep 30 13:21:26 2011] ../../acisf07757/products/events/fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31_src.evt and ../../acisf07757/products/events/fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31_bgd.evt exist, delete to re-create
[Fri Sep 30 13:21:26 2011] Size of ../../acisf07757/products/events/fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31_src.evt.gz[events] = 26 counts
[Fri Sep 30 13:21:26 2011] Mean chipx,y = (700.15, 617.23)
[Fri Sep 30 13:21:26 2011] Mean tdetx,y = (4617.15, 2319.23)
[Fri Sep 30 13:21:26 2011] chipx,y range = (682.00-717.00, 603.00-639.00)
[Fri Sep 30 13:21:26 2011] Size of ../../acisf07757/products/events/fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 38 counts
[Fri Sep 30 13:21:26 2011] ../../acisf07757/products/images/fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31_src.img and ../../acisf07757/products/images/fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31_bgd.img exist, delete to re-create
[Fri Sep 30 13:21:26 2011] ../../acisf07757/products/spectra/fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31_src.pi and ../../acisf07757/products/spectra/fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31_bgd.pi exist, delete to re-create
[Fri Sep 30 13:21:26 2011] Not generating rmf since there are only 25 counts
[Fri Sep 30 13:21:31 2011] ../../acisf07757/products/lightcurves/fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31_src.lc and ../../acisf07757/products/lightcurves/fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31_bgd.lc exist, delete to re-create
[Fri Sep 30 13:22:20 2011] 219.246
[Fri Sep 30 13:22:23 2011] Updating aperture counts using extracted products
[Fri Sep 30 13:22:23 2011] Error reading totcts from fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31_src.pi.gz
[Fri Sep 30 13:22:23 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 13:22:23 2011] Using photon index=1.80, rate=0.000893, arf fullrun_ccd7_acisf07757_pi14-548_pass1_cl_src31.arf
[Fri Sep 30 13:22:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 13:22:23 2011] Updating source flux to 6.9e-15
[Fri Sep 30 13:22:36 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting