[Thu Sep 22 05:49:47 2011] Detection parameters:
  Position = (904.0, 1034.3) = 10 17 0.72 39 4 32.6
  Extent = 0.5" x 0.5", rotation angle = 141 degrees
  Source counts = 221.6 +/- 14.9
  Background counts = 1.4
  Rate = 0.04 +/- 0.003

[Thu Sep 22 05:49:48 2011] Off-axis axis estimate = 1.00'
[Thu Sep 22 05:50:20 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 05:50:20 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Sep 22 05:50:20 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.927
[Thu Sep 22 05:50:20 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Thu Sep 22 05:50:22 2011] fullrun_ccd3_acisf07704_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 05:50:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07704_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 05:50:22 2011] fullrun_ccd3_acisf07704_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 05:50:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07704_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 05:50:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07704_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07704_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 05:50:22 2011] fullrun_ccd3_acisf07704_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 05:50:22 2011] fullrun_ccd3_acisf07704_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 05:50:22 2011] Fit fullrun_ccd3_acisf07704_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 05:50:26 2011] Spatial fit model total counts = 223.573000, observed total counts = 224.000000
[Thu Sep 22 05:50:26 2011] Offset between fit and detection position for source 1 = 0.670988 pixels
[Thu Sep 22 05:50:26 2011] 224.492400 total counts/ 13.549400 bgd. counts: snr = 57.306659
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.670988 pixels
  Position = (904.5, 1034.8) = 10 17 0.72 39 4 32.6
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 210.9 +/- 15.0
  Background counts = 13.5
  Rate = 0.04 +/- 0.003
[Thu Sep 22 05:50:26 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 05:50:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 05:50:26 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 05:50:26 2011] Source does appear to be extended
[Thu Sep 22 05:50:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 05:50:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 05:50:36 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Thu Sep 22 05:50:36 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.365
[Thu Sep 22 05:50:36 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.39"
[Thu Sep 22 05:50:36 2011] fullrun_ccd3_acisf07704_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 05:50:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07704_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 05:50:36 2011] fullrun_ccd3_acisf07704_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 05:50:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07704_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 05:50:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07704_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07704_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 05:50:36 2011] fullrun_ccd3_acisf07704_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 05:50:36 2011] fullrun_ccd3_acisf07704_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 05:50:36 2011] Fit fullrun_ccd3_acisf07704_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 05:50:41 2011] Spatial fit model total counts = 223.920000, observed total counts = 224.000000
[Thu Sep 22 05:50:41 2011] Offset between fit and detection position for source 1 = 0.000781 pixels
[Thu Sep 22 05:50:41 2011] 224.751100 total counts/ 13.318100 bgd. counts: snr = 57.936417
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000781 pixels
  Position = (904.5, 1034.8) = 10 17 0.72 39 4 32.6
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 211.4 +/- 15.0
  Background counts = 13.3
  Rate = 0.04 +/- 0.003
[Thu Sep 22 05:50:41 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 05:50:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 05:50:41 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 05:50:41 2011] Source does appear to be extended
[Thu Sep 22 05:50:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 05:51:43 2011] Not overwriting source region fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_src.reg
[Thu Sep 22 05:51:43 2011] Extracting stamp from image fullrun_ccd3_acisf07704_pi14-548_cl_sm2.00.img.gz, (887, 1017) - (922, 1053)
[Thu Sep 22 05:51:43 2011] Writing fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1.gif
[Thu Sep 22 05:51:44 2011] ../../acisf07704/products/events/fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_src.evt and ../../acisf07704/products/events/fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Sep 22 05:51:44 2011] Size of ../../acisf07704/products/events/fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_src.evt.gz[events] = 214 counts
[Thu Sep 22 05:51:44 2011] Mean chipx,y = (971.35, 902.31)
[Thu Sep 22 05:51:44 2011] Mean tdetx,y = (4229.69, 4032.35)
[Thu Sep 22 05:51:44 2011] chipx,y range = (953.00-988.00, 884.00-920.00)
[Thu Sep 22 05:51:44 2011] Size of ../../acisf07704/products/events/fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 9 counts
[Thu Sep 22 05:51:44 2011] ../../acisf07704/products/images/fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_src.img and ../../acisf07704/products/images/fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Sep 22 05:51:44 2011] ../../acisf07704/products/spectra/fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_src.pi and ../../acisf07704/products/spectra/fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Sep 22 05:51:47 2011] ../../acisf07704/products/lightcurves/fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_src.lc and ../../acisf07704/products/lightcurves/fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Sep 22 05:52:19 2011] Keeping rmf generated by specextract
[Thu Sep 22 05:52:19 2011] 203.553
[Thu Sep 22 05:52:21 2011] Updating aperture counts using extracted products
[Thu Sep 22 05:52:21 2011] Error reading totcts from fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Sep 22 05:52:21 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 05:52:21 2011] Using photon index=1.80, rate=0.0417, arf fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 05:52:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 05:52:21 2011] Updating source flux to 4.8e-13
[Thu Sep 22 05:52:31 2011] Reading fit data from acisf07704/analysis//spectral/fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_pl.csv
[Thu Sep 22 05:52:31 2011] Spectral fit parameter nH value = 3.78201e+14
[Thu Sep 22 05:52:31 2011] Spectral fit parameter PhoIndex value = 1.94812
[Thu Sep 22 05:52:31 2011] Failed to get F(0.3-8.0) from acisf07704/analysis//spectral/fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 05:52:31 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 05:52:31 2011] Using Nh = 3.8e+14, photon index=1.95, rate=0.0417, arf fullrun_ccd3_acisf07704_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 05:52:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 05:52:31 2011] Updating source flux to 4.8e-13