[Mon Sep 26 15:53:59 2011] Detection parameters:
  Position = (556.8, 763.6) = 11 46 6.13 47 28 55.3
  Extent = 0.5" x 0.5", rotation angle = 93 degrees
  Source counts = 675.0 +/- 26.1
  Background counts = 4.0
  Rate = 0.04 +/- 0.001

[Mon Sep 26 15:54:02 2011] Off-axis axis estimate = 0.62'
[Mon Sep 26 15:54:36 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 15:54:36 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Mon Sep 26 15:54:36 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.906
[Mon Sep 26 15:54:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Mon Sep 26 15:54:37 2011] fullrun_ccd7_acisf00767_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 15:54:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00767_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 15:54:37 2011] fullrun_ccd7_acisf00767_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 15:54:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00767_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 15:54:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00767_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00767_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 15:54:41 2011] fullrun_ccd7_acisf00767_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 15:54:43 2011] fullrun_ccd7_acisf00767_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 15:54:43 2011] Fit fullrun_ccd7_acisf00767_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 15:54:53 2011] Spatial fit model total counts = 682.014000, observed total counts = 682.000000
[Mon Sep 26 15:54:53 2011] Offset between fit and detection position for source 1 = 0.712436 pixels
[Mon Sep 26 15:54:53 2011] 683.122100 total counts/ 28.521100 bgd. counts: snr = 122.572637
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.712436 pixels
  Position = (557.3, 764.1) = 11 46 6.13 47 28 55.3
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 654.6 +/- 26.1
  Background counts = 28.5
  Rate = 0.03 +/- 0.001
[Mon Sep 26 15:54:53 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 15:54:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 15:54:53 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 15:54:53 2011] Source does appear to be extended
[Mon Sep 26 15:54:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 15:55:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 15:55:10 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Sep 26 15:55:10 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.934
[Mon Sep 26 15:55:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.38"
[Mon Sep 26 15:55:13 2011] fullrun_ccd7_acisf00767_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 15:55:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00767_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 15:55:13 2011] fullrun_ccd7_acisf00767_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 15:55:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00767_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 15:55:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00767_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00767_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 15:55:13 2011] fullrun_ccd7_acisf00767_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 15:55:13 2011] fullrun_ccd7_acisf00767_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 15:55:13 2011] Fit fullrun_ccd7_acisf00767_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 15:55:26 2011] Spatial fit model total counts = 686.365000, observed total counts = 686.000000
[Mon Sep 26 15:55:26 2011] Offset between fit and detection position for source 1 = 0.000721 pixels
[Mon Sep 26 15:55:26 2011] 688.538000 total counts/ 35.001000 bgd. counts: snr = 110.466337
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000721 pixels
  Position = (557.3, 764.1) = 11 46 6.13 47 28 55.3
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 653.5 +/- 26.2
  Background counts = 35.0
  Rate = 0.03 +/- 0.001
[Mon Sep 26 15:55:26 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 15:55:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 15:55:26 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 15:55:26 2011] Source does appear to be extended
[Mon Sep 26 15:55:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 16:00:32 2011] Not overwriting source region fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_src.reg
[Mon Sep 26 16:00:32 2011] Extracting stamp from image fullrun_ccd7_acisf00767_pi14-548_cl_sm2.00.img.gz, (540, 747) - (575, 781)
[Mon Sep 26 16:00:32 2011] Writing fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1.gif
[Mon Sep 26 16:00:35 2011] ../../acisf00767/products/events/fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_src.evt and ../../acisf00767/products/events/fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Sep 26 16:00:35 2011] Size of ../../acisf00767/products/events/fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_src.evt.gz[events] = 660 counts
[Mon Sep 26 16:00:35 2011] Mean chipx,y = (292.12, 510.75)
[Mon Sep 26 16:00:35 2011] Mean tdetx,y = (4209.12, 2212.75)
[Mon Sep 26 16:00:35 2011] chipx,y range = (274.00-311.00, 493.00-528.00)
[Mon Sep 26 16:00:35 2011] Size of ../../acisf00767/products/events/fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 17 counts
[Mon Sep 26 16:00:35 2011] ../../acisf00767/products/images/fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_src.img and ../../acisf00767/products/images/fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Sep 26 16:00:35 2011] ../../acisf00767/products/spectra/fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_src.pi and ../../acisf00767/products/spectra/fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Sep 26 16:00:39 2011] ../../acisf00767/products/lightcurves/fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_src.lc and ../../acisf00767/products/lightcurves/fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Sep 26 16:02:53 2011] Keeping rmf generated by specextract
[Mon Sep 26 16:02:53 2011] 247.271
[Mon Sep 26 16:02:57 2011] Updating aperture counts using extracted products
[Mon Sep 26 16:02:57 2011] Error reading totcts from fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Sep 26 16:02:58 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:02:58 2011] Using photon index=1.80, rate=0.0346, arf fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1.arf
[Mon Sep 26 16:02:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:02:58 2011] Updating source flux to 1.9e-13
[Mon Sep 26 16:03:07 2011] Reading fit data from acisf00767/analysis//spectral/fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_pl.csv
[Mon Sep 26 16:03:07 2011] Spectral fit parameter nH value = 1.41034e+21
[Mon Sep 26 16:03:07 2011] Spectral fit parameter PhoIndex value = 1.31368
[Mon Sep 26 16:03:07 2011] Failed to get F(0.3-8.0) from acisf00767/analysis//spectral/fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 16:03:07 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 16:03:07 2011] Using Nh = 1.4e+21, photon index=1.31, rate=0.0346, arf fullrun_ccd7_acisf00767_pi14-548_pass1_cl_src1.arf
[Mon Sep 26 16:03:07 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 16:03:07 2011] Updating source flux to 3.1e-13